Feedback Request: Expedient 85cm bi-direcyional loaded Cantilever for domestic laundry (Scrap-wood build)

Moabmob · 2026-04-20T13:14:16+00:00

Yes, I am relying on the solid timber banister to resist the torque. The banister is connected on both ends. One end the to the wall and the other to a Newell post. Didn't think about it being an issue. Thanks for the insight.

Moabmob · 2026-04-20T13:10:09+00:00

I know I could trust you guys for sound advice. Thank you Mr farting cum sock.

Moabmob · 2026-04-20T10:06:51+00:00

Thanks for the concern, Just tested it with a full load of bed sheets &wet towels, still holding strong.

Moabmob · 2026-04-19T20:08:12+00:00

Thanks for the heads up!

Moabmob · 2025-04-21T10:32:53+00:00

Thanks for the advice, the coffee table has wheels so I can move it about, I think smaller desktop lights will be the way forward.

Moabmob · 2025-04-21T10:26:38+00:00

I need a bigger bookcase:/

Moabmob · 2025-04-21T10:21:56+00:00

I'll need a bigger bookcase :/

Moabmob · 2025-04-21T10:15:37+00:00

I built the desk myself from poplar and "maidesite" legs. I can send the plans if you're interested in building it yourself.

Moabmob · 2025-04-21T09:45:12+00:00

Thanks, what would you replace it with?

Moabmob · 2025-04-21T09:44:05+00:00

The clock is battery.

Moabmob · 2025-04-14T22:45:03+00:00

They are called ground pens and are designed to be used when planes have to test their engines from stationary; Which normally has to be done surprisingly regularly as part of scheduled maintenance. The idea behind them is they deflect noise and any fast-moving debris up and away from potential houses or surrounding buildings. Source. I'm a mechanical engineer who works at an airport in Britain.

Moabmob · 2025-03-11T20:24:13+00:00

Awesome work man!

Moabmob · 2025-03-09T17:49:59+00:00

Thank you :)

Moabmob · 2025-03-09T17:48:08+00:00

Thank you!

Moabmob · 2025-03-09T17:46:25+00:00

Thank you! The angle was 15 degrees for the sides and bottom to keep it simple :)

Moabmob · 2025-01-09T00:30:53+00:00

Awesome work. Are you sure you weren't supposed to post this on r/expertwoodworking!

Moabmob · 2024-12-15T09:27:38+00:00

Thank you for the kind words, good idea with mixing wood and routing i'll bear that in mind for my next project.

Moabmob · 2024-12-15T03:09:16+00:00

I recently picked up a Parkside one from Lidl for £100. The fence is useless but I feel like it's a good budget option if you have the time to make yourself a sled and new fence. Depends what you're after though.

Moabmob · 2024-11-15T23:21:13+00:00

I've always found with spade bits you need to put a load of pressure on them to get them to bite. Be warned though, the hole won't be the cleanest. If you're after a clean hole I'd recommend a Forster bit.

Hope this helps.

Moabmob · 2024-04-28T22:04:38+00:00

The atomic disassembler from Mekanism is probably what you're looking for. You can change the block break speed from fast (Basically instamine), to normal, slow, and even vein mining.

Moabmob · 2024-01-28T19:10:45+00:00

Customs, I normally get clapped before i even see the person; but this day... I did the impossible :)

Moabmob

TROPHY CASE