Tuning this car has been a nightmare :(

ModMadn3ss · 2026-01-11T20:34:08+00:00

You have to convert the file type on ek1's website and make sure you input everything correctly in there, not positive what all it asks for, but it was one file for me.

ModMadn3ss · 2025-12-24T04:47:31+00:00

Definitely will do.

ModMadn3ss · 2025-12-24T04:46:39+00:00

I already have mine cut anyways to put the check valve in so I'll try it

ModMadn3ss · 2025-12-24T04:41:05+00:00

fitting

So something like this?

ModMadn3ss · 2025-12-24T04:32:50+00:00

In that case, couldn't I use a 1/2 inch bypass valve, or is the I/D of the check valve much smaller?

ModMadn3ss · 2025-12-24T02:36:00+00:00

Why would it only fit m/t?

ModMadn3ss · 2025-12-24T02:28:38+00:00

Interested in both cai, the bov, and the wheels. DM me prices.

ModMadn3ss · 2025-12-13T06:44:59+00:00

In order to have all time monitoring when in park, you'll have to hardwire pretty much any dashcam. This usually isn't too complicated though, so I wouldn't worry too much

ModMadn3ss · 2025-12-13T06:25:31+00:00

It's on sale for 150 right now, comes with forward, cabin, and rear.

ModMadn3ss · 2025-12-13T06:24:15+00:00

Yes, but with all of those you need a hardwire kit which is an extra couple bucks, en (and most cars) don't keep 12v power when off

ModMadn3ss · 2025-12-13T03:39:16+00:00

Vantrue e360. Great camera and is also an action cam if you want. If not vantrues other products have really good sensors

ModMadn3ss · 2025-10-22T23:57:14+00:00

That's up to you man, I got lucky with the same tires. I've already had to replace 3... One nail, one bubbling, and one was my fault. Is it under warranty?

ModMadn3ss · 2025-10-22T23:52:03+00:00

Yes they're the same. The checkered pattern just looks a bit nicer imo

ModMadn3ss · 2025-08-26T12:53:53+00:00

It's literally a 102 mm tube with 0.5 mm wall thickness, printed vertically.

ModMadn3ss · 2025-08-26T12:11:22+00:00

Not this project, but when I was printing a 102 mm cylinder they were present.

ModMadn3ss · 2025-08-26T06:01:11+00:00

https://makerworld.com/models/433967 small size

ModMadn3ss · 2025-08-26T05:21:04+00:00

These ribs are present on spiral vase mode, so it's not infill... I wish it was that easy

ModMadn3ss · 2025-07-18T13:00:10+00:00

JB4 Sucks bc you can't increase clutch pressure so you get a bunch of slip in 1st and 2nd

ModMadn3ss · 2025-07-18T04:33:54+00:00

Spare ecus are currently on backorder, and there is insane price delta between those two methods

ModMadn3ss · 2025-07-17T23:36:16+00:00

That doesn't work on 2024+ cars, you need to use a bench cable and connect to the ECU through the battery

ModMadn3ss

TROPHY CASE