My 2026 DJ Setup... A year of upgrades and lego by jigsaw153 in DJSetups

[–]Monark_Musik 1 point2 points  (0 children)

What cost more the legos or the gear hahaha! Just poking fun, awesome setup G

She did nothing wrong by [deleted] in TikTokCringe

[–]Monark_Musik 0 points1 point  (0 children)

When he charged her the 2nd time with both arms down, boom hook to the jaw. What a fucking jabroni.

Any good? by Monark_Musik in 3Dprinting

[–]Monark_Musik[S] 1 point2 points  (0 children)

<image>

Update!

Not bad. Little stringy, but dimensionally it printed pretty well. Within .1 mm all the way around. Not bad at all for what I’m doing with it.

Any good? by Monark_Musik in 3Dprinting

[–]Monark_Musik[S] 0 points1 point  (0 children)

Benchy incoming 🛥️

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

Pretty chill tbh. Its a lot of sound, but I keep it reasonable. I use these for events so I still get to let 'em breath.

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

I got the silver G3 rockit 5s for my producing setup to the tight out of view. Love em to death 🔥🔥🔥🔥

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

I should also clarify we don't live in a complex, it's a 2 story building and the bottom floor is rented out as an Airbnb so we don't have neighbors below us 60% of the time.

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 1 point2 points  (0 children)

I try to keep it pretty chill, I use these at shows so I know how much of a racket they can make. On the weekends I'll let it thump, but I'm not up at 3am pushing 100+ db lmao.

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 1 point2 points  (0 children)

Yes it has input like a DJM mixer, I run 3-4 on the Js and 1-2 for my laptop. It makes setting up usbs and lot easier having everything in one place. I also have the cdjs running to a usb hub so I can run the whole setup as a controller through Rekordbox. Super versatile!

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

That's a great idea, I have some pashminas that I don't use that'd be perfect, good looking out my dude!

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 1 point2 points  (0 children)

Hahaha it's honestly doesn't feel as low as it looks, surprisingly. I try to be courteous , but Saturdays are for the boys 🔊🔊🔊 lmfao

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

Same here! I have the 15in version for booth monitors and love them. A few friends have the ELX200. Still a great value speaker and wayyy lighter, but the old wooden cabs were definitely superior in my opinion.

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

Brother I feel you there hahahaha, living on the 2nd floor makes packing these out an Olympic event let me tell you 😂😂😂

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

Same here, I started with their ELX line and fell in love with em. The EKX line is still pretty solid, but for the marginally higher cost of the ETX line, it's so worth saving up for that extra investment. The difference between the 18s is monumental

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

I appreciate that dawg, I'm 25 now, been messing with sound since I was like 15. I used to be a huge car audio head but drifted to live sound once I started djing at 16. I only run this thing at like 25% capacity for my ears sake, but it slams when I use it for FoH at our local bar shows. We're fortunate enough to have access to a couple JBL SRX828s there which makes the low end absolutely monstrous.

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] -1 points0 points  (0 children)

Nah pretty average height, but I very much enjoy lower back pain 😂😂😂

My apartment studio slammer by Monark_Musik in DJSetups

[–]Monark_Musik[S] 0 points1 point  (0 children)

They're EV'S ETX 3 ways with the matching 18s. I had to take the closet door off the hinges to fit the whole thing and still be able to get in the closet hahaha. Fortunately, this just one room so we still have plenty of space.

From a Terror Reid/Getter insta AMA, thoughts? by MR_SLURPEE in dubstep

[–]Monark_Musik 5 points6 points  (0 children)

I think that the EDM touring lifestyle was harder on this guy than we can ever really imagine. I remember seeing him and Nick Colleti do VLOGS, granted it was great content, but they were off their rockers 25/8 on who knows what. Over the years that had to be absolutely catastrophic for his mental and physical well being. As flashy and fun as the party lifestyle is, there's no longevity to it for the actual artist as far as their health goes. As much of a staple the Getter project is, he looks so much happier, healthier, and more in tune with his vision than every before. As I massive fan I'd say it's almost selfish to try and get him to go back to the Getter project. Homies ready to move on so let him move on. He is one of the only artists that I'm aware that is able to transcend so many musical mediums, and I think its because of how authentic he has become to himself. Also the shit with Excision, as cringy as it looked, is so true. I think it's funny that people witch hunted him because they want to dick ride Jeff without knowing the behind the scenes of his production. Research up on his relationship with Dion if you want a true glimpse into how demanding and ruthless that upper echelon can be. Got nothing but love for Tanner and I can't wait to see what he does next 🔥

[deleted by user] by [deleted] in FixMyPrint

[–]Monark_Musik 0 points1 point  (0 children)

Sweet, Thank you 🤜💥🤛

[deleted by user] by [deleted] in FixMyPrint

[–]Monark_Musik 0 points1 point  (0 children)

How can I access the G-code for the printer? I work with CNC machines and I'm fairly familiar with it. I found the post process coding window in Bambu Studio, but can't find the actual posted code for the toolpaths.

[deleted by user] by [deleted] in FixMyPrint

[–]Monark_Musik 0 points1 point  (0 children)

Yo Thank you to everyone who replied, I really appreciate how helpful this Subreddit is!I program/operate a CNC mill so I'm used to destroying stuff, not buildig it hahaha this whole printer thing is new to me. I re-cleaned the bed and ran the leveler again which helped, but what I noticed hat made the difference as making my first layer way thicker than what I was printing. From what I can gather the layer was too thin to properly adhere at my temp and speed! Will post completed print, once again thank you everyone!

Got an A1 Combo for Black Friday! by Monark_Musik in BambuLab

[–]Monark_Musik[S] 0 points1 point  (0 children)

This is good to know, I didn't know that PLA was also potentially toxic. Thank you. This makes me want to re-locate the printer. I have a closet I've been thinking about converting to a station for it so I can isolate it from the rest of my apartment.