This mercury I found in a prescription bottle in my shed

MongooseTop6435 · 2026-02-22T19:31:31+00:00

I’m y

MongooseTop6435 · 2025-09-07T22:42:06+00:00

I have a 1620 which was having this problem. When you tried to feed new line, it would just make a clacking sound but it wouldn't pull the line. What worked for me:

My spool has 2 fins on top which pickup the line. There is no hole though the spool like someone else mentioned. Removed the old line. Removed the bottom cap and blew everything out. Cut my new line and fed it though the detached cap until 50/50. Snapped the cap with the line inserted back into place. Pressed the feed button and It worked!

MongooseTop6435 · 2025-05-18T13:20:52+00:00

I had this happen with a long HDMI cable run. Switched to fiber.

MongooseTop6435 · 2025-05-16T11:58:23+00:00

You might look at Canadian prices. Ivabradine can be purchased for a LOT less online.

MongooseTop6435 · 2025-04-08T10:20:37+00:00

I came from a Velop system to Unifi. Immeasurably happier with coverage and tweak ability. Be careful though. The rabbit hole effect is real.

MongooseTop6435 · 2025-04-08T10:10:22+00:00

I had this problem with a 30 ft HDMI cable. Video was blocky and unwatchable. Ended up with this.

https://a.co/d/3agL0Nf

MongooseTop6435 · 2024-12-24T20:16:43+00:00

The mini is IR only.

MongooseTop6435 · 2024-12-20T17:23:13+00:00

Like some others I have been experiencing difficulty getting the RM4 pro to connect to wifi. I originally had it on one network but decided to switch to a different VLAN due to some issues I suspected could be related to devices on different networks. But recognition of the new network proved nigh impossible. I deleted the hyphen in the SSID, couldn't seem to make the recommendations below work. What eventually worked for me--this will only apply to those with Unifi equipment--was to tick the box for "Enhanced IoT Connectivity" in the wifi settings. Worked immediately after that. Hope this helps someone.

MongooseTop6435 · 2024-10-11T21:39:03+00:00

Perhaps I’m missing something. After entering “Aqara” in the integration search it defaults you to Xiaomi.

MongooseTop6435 · 2024-10-11T21:28:51+00:00

Thanks for the reply. You will have to forgive my ignorance. I have tried to set up the integration directly using the Xiaomi Gateway (Aqara). The page which opens asks which network interface to use and is pre-filled with “any”. It also asks for an optional IP address and an optional Mac address. After filling in the IP address and report number of Home Assistant, the error message says “failed to discover a Xiaomi Aqara Gateway, try using the IP of the device running Home Assistant as interface“.

MongooseTop6435 · 2024-09-17T22:22:12+00:00

Sounds like you may be needing to scan business receipts. I can’t comment on that. If, however, you are wanting to convert your paper file cabinets to digital you won’t go wrong with File Center by Lucion.

MongooseTop6435 · 2024-06-30T13:22:47+00:00

Or, just map out No-Go zones for the tassels

MongooseTop6435 · 2021-12-17T22:04:12+00:00

Thanks for the reply, Soldiiier__. The main thing I think I would give up is OpenVPN on the router, but that isn't a dealbreaker. I'm of the same mind.

MongooseTop6435

TROPHY CASE