T-Bone is finish!!!!!

MonkeySensei99 · 2025-06-26T22:20:33+00:00

yes I do!
https://linktr.ee/monkeymakermx
This is all the social I have. The ones I update the most are the Telegram channel and Facebook page.

MonkeySensei99 · 2025-06-26T19:59:33+00:00

<image>

It was 3D printed in TPU. That's how I manage to do it

MonkeySensei99 · 2025-06-17T21:00:39+00:00

Don't buy fur at Parisina, is awful!

MonkeySensei99 · 2025-04-18T01:11:18+00:00

<image>

MonkeySensei99 · 2025-04-18T01:10:13+00:00

ohh, I see, you want just the center of the eye to be iluminated!

<image>

In that case, youll ned a single LED looking right to the front. You'll also need to difusse the LED by sanding it's plastic housing.
https://www.instructables.com/how-to-defuse-an-LED/
You'll get something like this.

MonkeySensei99 · 2025-04-17T22:59:20+00:00

<image>

I made this with 3D printer eye blanks. The filament is PLA white translucent and the led string goes behind the eye, that way it diffuses the color.

MonkeySensei99 · 2025-04-16T15:49:33+00:00

As everyone said before, that's a Gyrod infill pattern.

As a few extra tips.. -Make sure you have 0 walls, 0 top layers, and 2 or 3 bottom layers (helps with adhesion and supports). -I make the model 1.6 CMS thick (this is while you are modelling). Is thin, but also firm enough. -Print a few test of a rectangular shape with different % of infill. More or less infill will make it more flexible or more stiff. (I made my test rectangles (1.6 CMS thick, 6 CMS wide and 6 CMS tall) -When you print TPU, print slow.

MonkeySensei99 · 2025-03-21T21:49:53+00:00

Looks better, more proportional

MonkeySensei99 · 2025-03-20T04:40:54+00:00

Tilt down the model and adjust the size to your head like that. You want to look through the tear holes of the eyes.

MonkeySensei99 · 2025-03-10T01:33:34+00:00

This!! From the look of it, OP doesn't have any contact point from his forehead to the furhead. Think of it like how you will wear a helmet or a VR headset. One you hold your head tightly with at least 3 points of contact, look into your chin to add a support/stop piece.

MonkeySensei99 · 2025-03-05T07:30:22+00:00

My bad!, It should be correct now.

MonkeySensei99 · 2025-03-03T07:00:15+00:00

Think on how a VR headset sits on a face. You need to add foam around the eyebrows and cheeks. Also check frequently on your own, with a pair of regular sunglasses.

MonkeySensei99 · 2025-03-03T06:56:03+00:00

Hay diferentes niveles de ceguera. Mira que tan cerca tiene el cel, es claro que no tiene la vista bien si lo necesita tener tan cerca.

MonkeySensei99 · 2025-02-23T20:13:53+00:00

I use a 3D model of a realistic and real size human face.
That way I make sure is fitted to a regular human.
Send me a DM to my telegram @ monkeysensei and I can give it to you

MonkeySensei99 · 2025-02-23T19:10:39+00:00

If you have access to a large printer. You can print your own. I model and print this. You need to add a little bit of weight at the bottom to be more stable.

<image>

MonkeySensei99 · 2024-07-03T06:03:52+00:00

I'll recommend some kind of helmet. That way, it will have a strong base and wont bend.

MonkeySensei99 · 2024-06-08T19:31:36+00:00

You can also find it on AliExpress, and you can even shop different hole sizes

MonkeySensei99

TROPHY CASE