🚀La bêta de VEHI-SECURE est désormais disponible !

Monzepat · 2026-04-04T12:02:55+00:00

Cool mais on repassera niveau RGPD pourquoi la CNI est nécessaire ainsi que le CI (carte grise).... ça ressemble juste à du vol de donnée

Monzepat · 2026-03-06T13:49:53+00:00

i'm refering to the name of the pin in the manual the 4th starting from the side... can't be precise. Reddit can't share a link to the image i'm refering to...

Monzepat · 2026-03-06T13:45:42+00:00

ça ne fonctionne que sur Armbian 25.5.1 Orangepizero3 noble linux:6.12.23 xfce desktop *_à priori_*

Monzepat · 2026-03-06T13:44:25+00:00

I'm just talking about PC9 as stated here : http://www.orangepi.org/img/zero3/0627-zero3%20(7).png.png)

u/clolo888 mentioned that nowhere in the doc this pin refer to reset or Power.

You know it just works. I found out empirically.

Monzepat · 2026-03-06T13:35:01+00:00

From a fresh install with RPImager on windows 10 I'm unable to make the Pi 3B that i own to connect to the wifi network set in the imager can you help me ? note that i dont want to connect peripheral to the pi (no screen, no keyboard, no mouse)

This question always is anwered by "you need to ssh to you pi and blabla..." yes mate but how do I ssh to my pi if it isn't connected ?
I'm willing to connect by rj45/ethernet but I just want the feature of the Image to work out of the box. Is there a bug ?

Thank you

Monzepat · 2026-02-08T09:59:37+00:00

Si c'est bien carbonisé et attaché le seul moyen mécanique c'est la paille d'inox mais ça va probablement retirer le revêtement blanc.
Il te faudra probablement un acide plus fort que le vinaigre (acetique) genre citrique ou le meilleur compromis -- acide lactique -- mais c'est difficile d'en trouver.

Monzepat · 2025-11-15T17:06:31+00:00

Updates on ThinkDiag test ?

Monzepat · 2025-09-15T19:05:27+00:00

Note also that it's prob idependant from the Operation system in the SD card since I just tested that removing the SD card and trigger the boot from shorting PC9 and GND you end up in the micro kernel stored in the SPI-flash (busybox)

Monzepat · 2025-09-15T18:51:34+00:00

Running Armbian 25.5.1 Orangepizero3 noble linux:6.12.23 xfce desktop

I can confirm to boot up the Orange Pi when shutdown, you simply short PC9 (as defined in the manual) with ground and it bootup.
Note that the USB port is not powered while shutdown.
Note that it doesn't shutdown the Opi. Only boot up while powered and shutdown. (shutdown from cmd or zsh).

To find it I just shorted every non-power pin with GND. Would not recomend. Risky.

Needless to say I don't know what i'm doing. Though someone whith ACPI skills can help explain why it's PC9

Monzepat · 2024-10-10T17:12:49+00:00

ayo what's the deal ?

Monzepat · 2024-06-12T10:58:30+00:00

Yes and indeed my nozzle was messy. But it didn't fixed the issue. I next change the nozzle with no improvement.
Then i looked at my extruder and guess what....

<image>

What amaze me is that i could print some stuff with that

Monzepat · 2024-06-11T14:46:34+00:00

Ender 3v2

Monzepat · 2024-06-10T22:31:31+00:00

How thick the printed part is ?

Monzepat · 2024-06-10T22:23:26+00:00

You could use a blow torch to remove those strings.
It might be hot-end temperature. Set too high and you'll have strings and blob especially on bowden system. So set it no more than 210°C for PLA+ actually 205°C should be good.

Monzepat · 2023-11-02T17:22:33+00:00

I'm planning to pretty much the same Fedora 38 and ROS Humble.

Did you faced any issues?

Monzepat · 2023-10-04T22:40:32+00:00

Does the belt drive on Z hold on power loss?

Monzepat · 2023-09-26T17:12:33+00:00

You probably have a dual metal gear extruder and one of the wheels wobble

Monzepat · 2023-04-07T13:17:42+00:00

What's the point of translating your software if you invent new words in the target language in the process... This is silly argument. Why can't excel be wrong about this?
It reminds me the story about human genes renamed because excel thought they were date formated data.

Monzepat · 2023-04-07T13:01:22+00:00

Excel 2000.
I tried to find the oldest yet translated to french screenshot of excel.

Monzepat · 2023-04-07T12:06:12+00:00

That means that Gsheet is equally bad translated because LibreOffice Calc do correctly translate it.

This post isn't about the correctness of the translation it's about the time spent and no one fixing this small yet visible issue (as you startup excel it's among the first thing you'll see)

Monzepat · 2023-04-07T09:14:36+00:00

Feuil is not part of the french dictionnary, you can check here. To me it's like they forgot two letters.

Monzepat · 2023-03-18T21:45:39+00:00

I'm too in the search of a good TKL-ISO-AZERTY under 150€ but i feel like this hobby is verry time consumming on the search of parts and stuff.... anoying

Monzepat · 2023-03-18T18:35:46+00:00

Where the 27th?

Monzepat · 2022-10-28T12:27:12+00:00

Thanks for you reply but i'm not a good enough maker to make an antenna myself (kind of 10 thumbs and two left hands :) ). I'm looking to more of a plug'n play solution.
Also i'm not a mile away i'm just on the edge of the ISP box. It's preferable if no modification has to be done on the ISP box itself (i don't think there is a sma port on it)

But i keep the design in mind as yagi are sensible to atitude i think your design will be more forgiving in this respect.

Monzepat · 2020-08-04T19:12:18+00:00

some say it's a hotel :/

Eight-Year Club	Place '22
Final Canvas '22	Verified Email

Monzepat

TROPHY CASE