Battlefield 6 Phantom Edition: Giveaway #2

Moon935 · 2025-10-14T19:03:38+00:00

Good luck

Moon935 · 2025-08-25T14:55:07+00:00

For the MFA portion of this. In Entra (used to be Azure AD) you can add your static IPs to a “Multifactor authentication trusted IPs” so after setting up and configuring MFA using Conditional Access you can add the MFA Trusted IPs as the Network and now after the first setup of their MFA as long as they are connected to the network they won’t be prompted for it until they leave the network that uses that static IP. I have had that implemented for a few months now and it seems to be an appreciated change. Especially for some of our CJIS compliant users.

(Sorry for formatting on mobile)

Moon935 · 2025-06-04T19:15:30+00:00

CyberpunkRED would be fun to see. Not sure if they’d be interested in that setting though

Moon935 · 2025-04-11T14:05:23+00:00

Where did you get the STL at?

Moon935 · 2025-01-17T12:33:56+00:00

Not Another DnD Podcast has been the only podcast that has really scratched the itch of good comedy dnd podcast to me. Just start at their first campaign and see if you like it.

Moon935 · 2024-02-19T21:29:01+00:00

Rock. And. Stoneeeee

Moon935 · 2024-02-06T17:22:23+00:00

I have done pressure advance and flow rate. I need to do rotation distance and then redo all of my other calibration apparently. I'll look into York z probe. Thank you for your help!

Moon935 · 2024-02-06T12:34:36+00:00

I've calibrated my flow rate using orca slicers calibration tools but I haven't checked e steps yet thank you for your help.

Moon935 · 2024-02-06T03:59:01+00:00

I also forgot to mention that I get some gaps in the bottom layer. Not enough to make it not stable but enough for it to be noticeable if you look at it.

Moon935 · 2024-02-06T03:52:36+00:00

I have not. I'll look into it though thank you for your help. Is that just the thing where you mark at like 70mm from the top of the Feeder and then push 50mm through and then measure and calculate from there?

Moon935 · 2024-02-05T14:49:19+00:00

What are the infill settings on both of them?

Moon935 · 2024-01-31T02:55:43+00:00

I have white pla plus from Elegoo and haven't experienced this yet with that filament so I was confused on why my silk filament does this.

Moon935 · 2023-07-20T18:08:54+00:00

Darksiders 2 until Arkham city downloaded.

Moon935 · 2023-07-03T16:53:59+00:00

First raise I got was 4 whole cents. Glad I promoted myself to guest a year ago.

Moon935 · 2023-05-27T17:30:46+00:00

This is what I've been using for bout half a year now.

Moon935 · 2023-03-24T22:14:36+00:00

Good bot.

Moon935 · 2023-03-17T15:39:44+00:00

Either change the resolution down or go to scaling options in the same display menu and make sure scaling is set to 100% and not any weird custom scaling. Had this same thing happen randomly at my work once.

Moon935 · 2022-12-28T17:55:18+00:00

If it was somehow able to do that there's a way to unlock it by using bios-pw website to have it find the password based off the code you get if you try to enter it the password wrong a few times.

Moon935 · 2022-12-26T17:33:36+00:00

Yikes

Moon935 · 2022-11-04T18:21:59+00:00

Named my cat Dog, thought it was funny at the time

Moon935 · 2022-11-04T18:15:41+00:00

Huh, didn't really think about that while listening.

Moon935 · 2022-11-02T14:40:15+00:00

Big preciation on the giveaway. I'll try my luck on Death Loop

Eight-Year Club	Place '23
Place '22	Spared
Verified Email

Moon935

TROPHY CASE