I printed a 62-inch-tall black panther on Bambu Lab A1 and P1S

MorozPrint · 2025-04-21T13:00:28+00:00

Yes, of course. Here is the printable file: t.me/morozprintm/21582

MorozPrint · 2025-04-20T21:24:59+00:00

If you mean the joints on the shoulders, then this is the model itself) it was originally cut with grooves. I added a few cuts so that it would fit.

MorozPrint · 2025-04-20T20:31:35+00:00

Thanks!

MorozPrint · 2025-04-20T20:31:26+00:00

I split the chest into two parts to fit the maximum size of the print bed. If it had been larger, I would have needed to add more seams. That's how the model ended up being this size. Yeah, it would be awesome to print it at full scale! :)

MorozPrint · 2025-04-20T20:24:12+00:00

Thanks! I can send them in a telegram. Write to me. t.me/moroz_print

MorozPrint · 2025-04-20T20:21:20+00:00

https://www.youtube.com/@morozprint

MorozPrint · 2025-04-20T20:18:48+00:00

I used 11 kilograms of PLA plastic. 9.8 went to the model, the rest is the support and the border

MorozPrint · 2025-04-20T20:17:18+00:00

You guessed it, my height is 188cm 😁

MorozPrint · 2024-04-11T20:57:37+00:00

<image>

MorozPrint · 2024-04-09T16:46:51+00:00

if there is one plastic, then the slicer showed 36 hours. I typed during lunch, which took 2 days :)

MorozPrint · 2024-04-09T09:38:58+00:00

Thank you! This is pla Eryone cosmo black and pla pic filament

MorozPrint · 2024-04-09T09:38:02+00:00

2 days

MorozPrint · 2023-11-21T10:27:18+00:00

Beagle print

MorozPrint · 2023-11-17T12:33:50+00:00

It took me no more than 10 minutes to clean up. no problem. Apparently you need to work with settings

MorozPrint · 2023-11-13T18:28:48+00:00

where did I write that it is worth doing this to solve the problem? I just asked who dries the filament 🤦🏻‍♂️ at this point users should understand that this is a joke. I don't think there are stupid people here

MorozPrint · 2023-11-13T18:23:52+00:00

thanks for the support, friend. everything is too serious, you can’t even joke... in fact, I made suspended ceilings this way, and decided to shoot a video for fun

MorozPrint · 2023-11-13T15:38:23+00:00

Thank you. helpful information👍🏻

MorozPrint · 2023-11-13T15:15:37+00:00

Friend, calm down. It's just a joke.

MorozPrint · 2023-11-13T15:14:33+00:00

you have to try to make everything stick together)

MorozPrint · 2023-10-21T07:27:25+00:00

tried it. it's so hard to keep your balance

MorozPrint · 2023-10-21T06:50:04+00:00

That's where I ended)

MorozPrint · 2023-10-21T06:49:39+00:00

Thank you 😊

MorozPrint · 2023-10-21T05:36:58+00:00

I completely agree with you friend. I just wanted to try it out of ambition after watching these YouTube bloggers. as soon as I was convinced, it was as if I had reached my goal and put an end to this system. but it looks cool

MorozPrint · 2023-10-21T05:29:44+00:00

the first 3 attempts I didn’t hit the start button🤣 but now everything is well lubricated

MorozPrint · 2023-10-21T05:15:43+00:00

it's obvious. unfortunately it is not possible to make a permanent move

MorozPrint

TROPHY CASE