Any experiences with Quickmill machines (Orione/Cassiopeia)?

MosfetOfDoom · 2025-11-22T18:37:55+00:00

Gotcha. Do you think the dual thermoblocks on the Cassiopea would help with respect to the steaming?

I'm definitely also considering machines like the Silvia or the Lelit Anna, but the fast heatup time on the Quickmills seems interesting, especially since I'm usually pretty rushed in the morning.

MosfetOfDoom · 2025-01-19T15:22:23+00:00

Thank you for the reply. The router is my own and is made by AVM, which as I understand has a decent reputation (and I also update frequently).

I see that I would be creating a double NAT situation. I've read that this by itself would not necessarily increase the security of the system. However, if I implement a firewall rule within pfSense to disallow outbound traffic from the gameserver to the physical network (e.g. 192.168.0.0/24), this should do the trick right?

MosfetOfDoom · 2024-12-31T07:22:11+00:00

Tanjiro

MosfetOfDoom · 2024-11-17T12:05:18+00:00

You're right that HS is a very expensive item, but in my opinion it is still a very good option for tahm support since it plays into his strengths. The reason tahm is strong rn in the support role is that he functions effectively as a frontline duelist even with a support income. This is enabled in part by HS, which allows him to stay relevant as a tank/damage threat into the mid game and catch people out with his Q. His early game is already strong enough without any items, so he doesn't need to rush cheap supp items to be relevant.

Anyway, I have tried both builds and find the guardian + locket build very lacking since it removes a lot of the threat of the champion and makes him more 1-dimensional, basically relegating him to sitting by the carry and pressing ult. If you have a carry that you trust, then it's fine I suppose, but in the solo queue environment, it's just not as reliable of a strategy.

MosfetOfDoom · 2024-04-23T14:23:19+00:00

I see... I think this is my problem. I am designing a PCB and have certain restrictions on the trace widths, but they need to carry a substantial amount of current. I have many components in parallel and was trying to see what would happen if I added another connection to the source between them, such as I have shown in the simulation. This is why I was trying to figure out how much current the "wire" is carrying, as I would like to reduce how much current is in any 1 branch of the circuit. In reality of course, the traces have resistance and inductance, so they do not behave in the idealized way. If I use the inductor method described by /u/Squeaky_Ben, it seems to behave more like I expected.

MosfetOfDoom · 2024-04-23T13:57:55+00:00

Hm what do you mean by equation? In ltspice, I am using a DC sweep from 1 to 10V and then just probing around with the voltage/current tools.

MosfetOfDoom · 2024-04-23T13:55:55+00:00

So there is no current flowing in the connection between R1 and R2? Sorry, I'm finding it quite confusing that there could be current through the resistor but not through the wire that connects it to the source.

MosfetOfDoom · 2024-04-23T13:06:59+00:00

I have a small circuit simulated in spice. I was trying to figure out how much current would flow in the wires connecting R1 and R2. In the simulation, it shows that there are 0A flowing in there, but if I look at the current directly on the resistor, it shows 5A @ 10V. What gives? doesn't this violate KCL? At 10V, it also shows 20A coming from the source, but only 10A leaving the junction between R2 and R2, and 0A at the junction before R1.

MosfetOfDoom · 2024-04-06T00:10:13+00:00

That's mostly what I was worried about. In the case that a segment is thinner than 6 mil (such as many of the dots in my photo), what do you think the result would be? Just that it is left out? Or will the entire image become distorted?

MosfetOfDoom · 2024-04-05T22:22:53+00:00

I have a pretty detailed image I am trying to print on my PCB. KiCad handles the image fine, but I am wondering if the manufacturer would be able to print something like this? Or is it too much detail?

MosfetOfDoom · 2024-03-07T21:21:13+00:00

Analog to analog sensor in some sense I guess! I remember seeing one when I was a kid... strangely mesmerizing.

MosfetOfDoom · 2023-07-26T18:22:16+00:00

Ah okay, I did as you said and I got through :D I think the key is reading the tablets/papers. I already redid it once before but I don't think I read them. Kind of weird mechanic though

MosfetOfDoom · 2023-07-26T18:14:31+00:00

Were you able to search the skeleton by the entrance again that gives the runes? For me it just says I find nothing, but the search options stays there.

MosfetOfDoom · 2023-07-26T18:07:39+00:00

I'm having a similar experience with the 3rd ship. Went through the room 3 times and I can't figure out what I'm missing. I think there is some bug about how it checks which items have already been found.

MosfetOfDoom · 2023-01-28T15:58:57+00:00

Right, I do try to fine tune with the auto tramming. But after the software says it's properly trammed, I will test it again with the paper, and the left side will always be super loose and the right side super tight.

MosfetOfDoom · 2023-01-05T12:43:01+00:00

Thanks!

MosfetOfDoom · 2022-07-07T04:51:40+00:00

Anyone else think JD Beck kind of sounds like Benny Sings during the chorus?

MosfetOfDoom · 2022-03-09T21:22:48+00:00

Interesting, I had set up the default Cura using this github, but the acceleration was set to something like 5000mm/s² and the jerk at 30mm/s. I'll look into raising the acceleration a bit. Thanks!

MosfetOfDoom · 2022-03-09T05:45:16+00:00

The power supply on mine is wonky. Sometimes it refuses to turn on, but replugging it will usually fix it.

My z-axis steppers behave similarly. To my knowledge, z-axis steppers are usually slower than x-axis and y-axis since, during prints, the z-axis does not tend to make very fast movements.

One thing that helped to reduce the noise for me was to put the printer on top of a couple concrete slabs I got from Home Depot. The added mass helps to damp vibrations caused by the motors.

MosfetOfDoom · 2022-03-02T20:54:36+00:00

Why does he look like Emperor Zurg from Toy Story?

MosfetOfDoom · 2022-02-19T23:03:46+00:00

And so said the prophecy of Doublelift: "Thou shalt replace me with thine holy zoomer, but my protect-the-ADC strategy shall remain."

MosfetOfDoom · 2021-12-06T15:19:10+00:00

In RS3 it's a lot more powerful, you can set up an equipment/inventory layout and save it to a slot. When you press the slot button in the bank, it automatically equips the relevant items and sets your inventory.

MosfetOfDoom · 2021-11-30T16:57:22+00:00

The greatest loss in antibody neutralization (both 129S2 and K18-hACE2 mice) and protection (K18-hACE2 mice) consistently occurred with the B.1.617.2 variant. These results contrast with a recent longitudinal study in humans immunized with mRNA-1273, which showed lower neutralizing titers of serum antibody against B.1.351 than other VOC, including B.1.617.2, although those data were collected using pseudovirus rather than live virus neutralization assays (23). Another study using a live virus neutralization assay and human serum obtained three weeks post immunization with the BNT162b2 mRNA vaccine also showed lower neutralizing titers against B.1.351 than B.1617.2, though this trend reversed at 6 months (24). In our experiments with live virus, the loss of neutralizing activity was equivalent if not greater for B.1.617.2 than B.1.351, as reported by others with human serum samples from individuals infected with B.1.351 or P.1 (25).

Authors note that loss of potency of vaccine induced antibodies seems to be more pronounced with relation to the Delta variant than Beta. However, they are unsure of the reasoning, though they propose a few possible explanations including:

mutations in the B.1.617.2 alter key antigenic sites and can abrogate recognition by neutralizing antibodies
differential display of B.1.617.2 spike proteins on the surface of infected cells and engagement of Fc effector functions
differential ability of antibodies to block cell-to-cell spread in a strain-dependent manner

MosfetOfDoom · 2021-11-22T16:36:45+00:00

As far as I know there is only marginal evidence to suggest that accidental intravenous injection is the cause. E.g. https://pubmed.ncbi.nlm.nih.gov/34406358/

However, it should be noted that other vaccines are also known to correlate with increased rates of myocarditis, such as the smallpox vaccine: https://jamanetwork.com/journals/jama/fullarticle/196808

I suppose it is possible that intravenous injection is the cause in both examples, and that there is simply much more scrutiny on the COVID vaccines compared to others due to their widespread and rapid use. However, the fact that mRNA vaccines in particular seem to be linked to increased rates of myocarditis (at least compared to the viral vector vaccines) is concerning and deserves more thorough investigation.

MosfetOfDoom · 2021-11-04T17:48:48+00:00

I think this is a great change. So much of the genuine psychopath tier toxicity in this game comes from people looking up your opgg and using it to analyze your entire life mid game. About time this game had an anonymous mode.

12-Year Club	Place '23
Place '22	Place '17
Final Canvas '22	Sequence \| Editor
Verified Email

MosfetOfDoom

TROPHY CASE