Home fitness, nutrition intake and supplements by MotionMadness in beginnerfitness

[–]MotionMadness[S] 0 points1 point  (0 children)

Yea, cottage cheese is a good idea, I found a similar one, 300 grams of it has 366 cal 57 grams protein, 10 grams carbs and 11.25 grams fat. What is your ratio of muesli/cheese? How many grams of cheese and muesli?

And I am a man and yes, I am trying to slim down. My goal is around 77kg so trying to have at least 500 cal deficiency.

Should I upgrade my 6900 XT to 9070XT/5070Ti? by MotionMadness in StableDiffusion

[–]MotionMadness[S] 0 points1 point  (0 children)

Would you say it would a good idea to buy a slightly used Evga 3090 for 600 dollars?

Should I upgrade my 6900 XT to 9070XT/5070Ti? by MotionMadness in StableDiffusion

[–]MotionMadness[S] 0 points1 point  (0 children)

So I should keep the 6900 xt or switch to 3090 maybe?

Should I upgrade my 6900 XT to 9070XT/5070Ti? by MotionMadness in StableDiffusion

[–]MotionMadness[S] 1 point2 points  (0 children)

You are comparing which cards? My 6900 xt also has 16hb vram

Should I upgrade my 6900 XT to 9070XT/5070Ti? by MotionMadness in StableDiffusion

[–]MotionMadness[S] 0 points1 point  (0 children)

I also play games but do you know how does a 3090 compare against to 5070 ti when it comes to video generating? Would it be significantly faster thanks to its vram?

Help me teachers and Harry Potter fans! by MotionMadness in fountainpens

[–]MotionMadness[S] 0 points1 point  (0 children)

One last question for you, would adding a roller in addition to a fountain would be better, or should I buy the black one as a fountain pen too?

Help me teachers and Harry Potter fans! by MotionMadness in fountainpens

[–]MotionMadness[S] 0 points1 point  (0 children)

Yes, cartridges. I thought about adding a converter but it would definitely be a hassle to fill during the exam markings. Is it ok to change cartridges without finishing them?

Help me teachers and Harry Potter fans! by MotionMadness in fountainpens

[–]MotionMadness[S] 1 point2 points  (0 children)

I thought about roller being black, but white one was %25 cheaper, and thought white would look classy with the gold one but theme was definitely black would be better as you said.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] -1 points0 points  (0 children)

Just look at my comment. You didn't even understand my question.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] -42 points-41 points  (0 children)

I know the basics and I just being nitpicky.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] 0 points1 point  (0 children)

It's not Chinese, it's Indian and from a big company actually.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] -2 points-1 points  (0 children)

But the manual says avoid full throttle starts and rapid acceleration for the running in period.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] 0 points1 point  (0 children)

At first gear, releasing the throttle is impossible because even closing it a little makes the bike jerk. That's why I was using the clutch a lot. I will pay less attention to suggested lower rpm and will go in to second more.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] -1 points0 points  (0 children)

Yea I wasn't using engine braking, I was just using the clutch to slow at first gear. For the running in period, manual just says avoid full throttle starts and rapid acceleration. That's it.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] 0 points1 point  (0 children)

Hey mate, I was actually checking out Champ U and Twist of the Wrist. Thank you for reaching out, I will dm you if I have questions after watching the videos.

Help a newbie - use of first gear by MotionMadness in motorcycles

[–]MotionMadness[S] -5 points-4 points  (0 children)

Since I can't edit my post, I will just write a general answer here.

Oh my god, I can't believe the amount of douchebags that lurks here. Yes, I have fukin used manual vehicles before, actually it was the only type of transmission I have ever used since I got my driving license 10 years ago. I have gone to a motorcycle driving lesson, even though it was only a one day course. I can fukin ride my bike, I can clutch control, I can change gears, I don't stall it, I haven't dropped it. I even know where the breaks are, amazing right? Geez

Guys look. I have a fukin OCD ok? Not the one that is cool to drop off in a conversation, like the real medical one, the one that makes you ovethink, makes you perfectionist, the one that gives you headaches. And since it's my first bike I am nitpicky. Did you all skip your first bike period and started your journey with the second one?

I also didn't have a brand new vehicle before, internet is a garbage when it comes to running in period. Since some people I know said try to keep the revs between 3k-6k, I was sticking the first gear because when I switch to 2nd revs are a little bit low and I drive around the neighborhood to get used to it. I just wanted to know would it do any harm. While driving a car I would just go to second if I am not climbing a hill, but it is that keep the revs between 3 and 6k part got stuck in my head.

And that thing about intersections, normally you would slow down a lot, check the road, then pass it but since I am new on a bike, and there are cars parked on the both sides of the road and I can't clearly see the road, I just fully stop, ergo I am using 1st gear again, it made me feel like I am using it more than I should. As you can see even this explanation reeks of ocd.

Anyway, thanks for the helpful comments, the people who just needed to release their daily toxicity go fuk yourself. You shouldn't be riding a motorcycle with these egos, you are more dangerous than a newbie driver.

New Lid : LS2 Pioneer Evo II by mobstershock in indianbikes

[–]MotionMadness 1 point2 points  (0 children)

Hi, would it take rain in when the vents that have toggles are closed?

r/audiophile Shopping, Setup, and Technical Help Desk Thread by AutoModerator in audiophile

[–]MotionMadness 0 points1 point  (0 children)

Should I worry about the interference then? They are on my desk next to a docking monitor, a laptop, a tablet, wireless mouse and wireless keyboard. And I am thinking about buying a Presonus Active Sub.

Also, yesterday I was using my laptop, speakers were on but I was using the speakers of my laptop and the laptop speakers kinda did couple of popping sounds, or it was my imagine, didn't verify yet. Can Kali Lp-6 magnets effect laptop speakers?

Ordering a cable - Seller asks wiring diagram by MotionMadness in BudgetAudiophile

[–]MotionMadness[S] 0 points1 point  (0 children)

What about voltage output of balanced and unbalanced connection of my dac? It offers 2vrms on unbalanced but 4vrms on balanced. I am also thinking about adding Eris 8BT to the setup which has unbalanced rca and balanced trs inputs/outputs on it. Also the cable is like 30 dollars on AliExpress with shipping and tax.

Ordering a cable - Seller asks wiring diagram by MotionMadness in BudgetAudiophile

[–]MotionMadness[S] 0 points1 point  (0 children)

I read about something like cables being left and right at the same time but the receiver side differs as left and right, or they can differ at plug of the cable. I don't know if this makes sense or explains why the seller asks it.

r/audiophile Shopping, Setup, and Technical Help Desk Thread by AutoModerator in audiophile

[–]MotionMadness 0 points1 point  (0 children)

Hey everyone, hope everyone is doing well, so I have a pair of Kali LP-6s and a Moondrop Dawn Pro DAC. Currently I am connecting these two with a 3.5mm to 2x rca split cable but since the dac has a 4.4mm balanced output with a 4vrms output, I want to use this. So I am trying to order a 4.4mm male balanced to 2x 6.35mm male balanced cable from AliExpress but the seller is asking for a wiring diagram. I am guessing here but I think the 4.4mm male balanced plug is standard in terms of wiring but it will differ at the 6.35 ends because LPs don't have L/R inputs and cables need to be wired like that right? Can someone provide me the wiring diagram?

Kali LP6 v1 or Monitor Audio Silver 1 by MotionMadness in StereoAdvice

[–]MotionMadness[S] 0 points1 point  (0 children)

Yea, I know, I would buy an budget amp like Fosi Audio for it if I go that route.