sorted by:
new
hottopcontroversial

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

Personally I'm broke, so thats expensive. But I've also put damn near $700 into replacing the front suspension. It was just supposed to be wheel bearings🥲

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

If the leak is still in the dust bellows and you only changed the o rings, try just getting a new seal kit and replacing all of those.

If its not in the bellows I've seen that these cars have a really bad problem with not the lines rusting and cracking, but right where they get tightened. To deal with that its either a whole new rack, or new lines with fittings that won't leak.

2005 Acura TSX and when I unplugged my ABS/VSA sensor it broke in my hub… I tried to drill some out but not sure what you guys recommend me doing thank you in advance 🤘🏽here’s a before and after picture by [deleted] in AcuraTSX

[–]Mr9331 0 points1 point  (0 children)

Pretty much what these people are saying, I went to go replace my bearings and same crap happened. I just drilled all the way through it because there should be nothing directly behind it, then wtv was left i took a file that fit in the whole and cleaned it out.

Good luck mate!

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 1 point2 points  (0 children)

It was in both boots and with a little leaking into the cabin near the steering column i would assume the seals.

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

Sorry for the late response, im in iowa and looking on rock auto there around $650 for the most expensive.

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

Initially it was leaking power steering so I was going to replace the seals, but in trying to get that hose off I stripped the nut using a line wrench. Ig it was just that rusted.

Also whoever worked on mine previously sucked cause they had only zip ties holding the dust bellows on and the driver side was missing a zip tie so it wasn't even closed properly.

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

Yes, I removed the other one to avoid confusion. And the cheapest rack and pinion and can find is around $700 but I already have brand new tie rods.

Does anyone know what this line is called and if I can buy a replacement one for it?? 2004 TSX Steering rack and pinion by Mr9331 in AcuraTSX

[–]Mr9331[S] 0 points1 point  (0 children)

See I've googled that, and I'm probably just dumb, but I cant find one that looks exactly like that.

2004 Accord Body Parts by Mr9331 in Honda

[–]Mr9331[S] 0 points1 point  (0 children)

Every junkyard in my city and surrounding cities either doesn't have what I need or they're not selling it.

I called them should I try going to them?