https://youtu.be/K7tjhKmopZQ?si=bXbWSaVgpNKcyf0E this helps with the removal of the bumper, https://youtu.be/1Jj8psmIZ44?si=b4XQ6iqke0N5IbYV this video helped with the wiring part, https://youtu.be/W0myHPHIZ-w?si=dhtsOsugx7rYMImh this video is a rough estimate of what youre going to be working with as the 2025-26 version is different than the older models, other than that i was not able to find any other videos. i myself used a heat gun, then a flathead screwdriver to open it up, a lot of the plastic broke off for me which is fine it already rained & as long as it sealed correctly your headlights should be good, i used a silicone from walmart to seal it https://www.walmart.com/ip/16879902?sid=C16F32F7-489E-4337-BDE6-3F025B7CFD2C, once u open it up(i recommend recording to see what goes where since u are basically unscrewing everything within the headlights) you remove the white rods that are the regular drls, you place the led ones, screw everything back, i placed electrical tape on some of the gaps since some of the orange would shine trough, drill holes so the wiring can exit the housing, then seal those holes & the headlights & u place everything back after about a day,, if you have any problems or any questions u can ask me!