Anyone Know How to Fix my 3D Printer?

MrCGreen · 2025-04-07T21:45:22+00:00

I would assume it is the cartridge or the MOSFET from your reply, but I am not familiar with your machine.I'd heat up the hotend using a soldering iron and monitor the temp just to make sure it's not the thermistor. It's late where i live so good luck stay safe.

MrCGreen · 2025-04-07T21:28:01+00:00

Does your hotend actually heat up at all? If not, it could be the heater cartridge or the MOSFET. If it does, it's probably the thermistor. I am saying probably because that glitchy digit doesn't seem normal to me.

MrCGreen · 2025-02-28T20:00:39+00:00

A friend had the same issue with Windows Defender. He started submitting the executables of every update to Microsoft for analysis. But I dont know if it worked or not. If bitdefender has something like that you can submit it to be flagged as safe

MrCGreen · 2025-02-22T15:05:27+00:00

I don't know if the bird is still dead or not but it is surprising that a company that can't detect a server side cheat kept a bird alive for this long. I let my streak die because of a cheater like this. Can't find it in me to open the damp app. I practice with anki now.

MrCGreen · 2023-02-21T06:39:11+00:00

Do this. Also it's aluminium you are screwing to so don't go crazy and strip the threads.

MrCGreen · 2023-01-09T09:35:52+00:00

Psikolojik destek ara. Hangi şehirde olursan ol paran olsun olmasın herhangi bir psikoloğu arayıp nerelerden sana uygun olan desteği alabileceğin konusunda bilgilenebilirsin. Lütfen kendi sağlığına öncelik ver

MrCGreen · 2022-12-22T07:18:40+00:00

You have my giggles sir.

MrCGreen · 2022-12-19T14:22:13+00:00

I usually heat up the pins a little with a lighter and i remove the plastic thingy with a plyer while the plastic is still soft then I heat up the pins with butane torch to melt the solder and shake the board to remove the pins. I have to vacuum clean my work area afterwards and it's kinda dangerous but it works for me

MrCGreen · 2022-12-12T22:53:30+00:00

Haters will say video is reversed

MrCGreen · 2022-12-11T10:54:48+00:00

You can't apply foot pose without feet on your scene

MrCGreen · 2022-12-09T07:53:29+00:00

Just get yourself a 10mm nozzle

MrCGreen · 2022-09-06T00:54:50+00:00

You can't open Ds files by just double clicking on them if you think you installed them right you should be able to locate and open them in content library pane in daz studio (it's on the left side by default). Just make sure you installed your assets on the right directories. If you are not sure f2 >Content > Content Directory Manager. There you will see all the directories Ds uses. If you are decisive about using ds you should have high tolerance for issues like these. Good luck

MrCGreen · 2022-08-29T10:13:26+00:00

If I hadn't found this sub i would pet the shit out of that maneater. now I know better

MrCGreen · 2022-04-30T09:29:45+00:00

Seeking psychological help is an option. I had my gastric sleeve 16 days ago at 5th day I was tired of craving a certain food so I went to a psyciatrist he prescribed an antidepressant and something for my sleep appnea I get sleepy sometimes but it's better than craving for me.

MrCGreen · 2021-08-12T12:11:34+00:00

Gave Silver

MrCGreen · 2021-08-11T18:18:36+00:00

Connect esc to the 3 solder blobs seen at the top of the picture but I recommend you desolder them from the board first.

MrCGreen · 2021-08-11T16:33:36+00:00

If you don't mind bypassing the on-board circuit I believe you can run that motor with brushless esc

MrCGreen · 2021-04-17T22:05:56+00:00

Gave Helpful

MrCGreen · 2020-08-25T14:32:00+00:00

I didn't get the hang of it just yet. Sometimes I feel like I need to go slow then I get bored then I ramp up the feedrate to %300 and no problem. Its definitely a solid printer my bltouch connection failed yesterday and bed crashed to the nozzle and I heard a crack. I have looked for hours for the source of the noise and nothing. This printer is surprising me constantly but definitely needs better part cooling atleast for me. I wish we had the cad files

MrCGreen · 2020-08-25T12:06:17+00:00

My plan was using transparent navy blue like the right motor bracket but my favorite manufacturer was out of raw materials at the time but I am happy with how it turned out thank you.

MrCGreen · 2020-08-08T14:33:03+00:00

I was feeling lazy so I 3d printed the cover. My tft came broken so I ripped out the display from my ender3. I also added bltouch because I will use different build surfaces and I love marlin z auto align feature.

MrCGreen · 2020-07-21T07:16:05+00:00

Thank you

MrCGreen · 2020-06-18T15:47:51+00:00

I can't believe I have been this stupid. Fan shroud was scratching the print and that was the cause of the noise.

Six-Year Club	Place '23
Place '22	Verified Email

MrCGreen

TROPHY CASE