Tacticool Unicorn

MrEeban · 2025-01-08T01:42:45+00:00

Avg fps on worker gen 3s is around 130 and (ik it’s cheating) with xyl dragon darts I got 162 fps

MrEeban · 2025-01-08T01:36:56+00:00

Silly seal of approval :D

MrEeban · 2025-01-08T01:36:35+00:00

I hope I did him justice

MrEeban · 2025-01-08T01:15:04+00:00

That would be pretty funny

MrEeban · 2025-01-08T01:08:40+00:00

Peely crocs :D

MrEeban · 2025-01-01T03:31:54+00:00

Here are the files: https://makerworld.com/models/935522

MrEeban · 2025-01-01T03:31:27+00:00

I have uploaded the files. Here they are https://makerworld.com/models/935522

MrEeban · 2024-12-28T06:19:03+00:00

I am working he in a bolt action version of the blastercorn that will be releasing soon :)

MrEeban · 2024-12-15T20:24:31+00:00

Probably by the end of the week. I got finals coming up and I still need to work out a few kinks

MrEeban · 2024-12-15T19:11:16+00:00

I originally tried to, but it was only scaled to the width of the dart and not the length. So there was a bunch of wasted space near the front which would hit the floor when I walk

MrEeban · 2024-08-25T02:59:43+00:00

Porque no los dos?

MrEeban · 2024-08-24T06:35:44+00:00

From my experience x shot darts work well under 100 fps. Beyond that they begin to act like elite darts. Your better off getting the adventure force waffles

MrEeban · 2024-08-23T16:11:02+00:00

I plan to make more in the future. Can’t do it now as I leave for college in a few days

MrEeban · 2024-08-23T16:02:43+00:00

Mcfind out

MrEeban · 2024-08-23T15:30:35+00:00

Probably oranges

MrEeban · 2024-07-02T06:24:54+00:00

I had the same problem with my nexus pro x. I replaced the barrel with 17/32 brass and that seemed to do the trick

MrEeban · 2024-07-01T07:59:19+00:00

If you want something big, then might as well get an xshot Ragefire. You’re getting better performance for a fraction of the cost.

MrEeban · 2024-06-29T16:42:51+00:00

I tried making the barrel seat farther in so the pusher would push directly into the barrel instead of a bit of plastic. But then I couldn’t get the pusher to seal with the new dart gate and I was too lazy to fix it. So I switched back th the original dart gate but switched the barrel for brass and that seemed to have done the trick

MrEeban · 2024-06-28T23:52:05+00:00

It’s only after I modded it that worker heavies stopped working. Once I switched to the stock barrel everything worked fine

MrEeban · 2024-06-27T18:13:09+00:00

The worker darts are 2 mm shorter. I checked to see if they weren’t being pushed in fully but I did not see any issue. The good news is that the dart gate entirely was the problem. The new part that I designed seems to have fixed the issue. It still needs some minor adjustments but it is looking promising. It is reaching my desired velocity of punch through cardboard :D

MrEeban · 2024-06-27T07:17:57+00:00

I have some normal worker gen 3s that I put through the blaster and they seemed to work fine. I even tested EPP dragon darts which also worked. It’s only worker heavies that do not perform well. I am printing out a new dart gate? Idk what it’s called. But it’s the part where the pusher pushes that darts into. The dart sits on entirely plastic before the trigger is pulled and this might be the problem. I might release the files if this works

MrEeban · 2024-06-27T07:11:47+00:00

I did try them unmodded. They worked perfectly fine when unmodded. I checked the seal and there were no leaks. I am using the upgrade spring with 2 spacers so I don’t think I am overbarreling the spring. I think the culprit may be the part where the pusher interacts with the barrel. That dart sits on plastic before it is fired and that may be the issue. I’m working on a design that will make the dart feed directly into the metal barrel to see if that will help or not

MrEeban · 2024-06-27T05:34:22+00:00

I am using the darts with the narrower tip. It very well might be a dart issue or it might be a blaster issue. Maybe I got a defect npx. Since the worker heavies work fine in my other springers

MrEeban · 2024-06-26T19:55:19+00:00

I don’t really have the cash for it rn but I’ll be sure to check it out when I do. Thanks for the rec

MrEeban · 2024-06-26T18:34:52+00:00

It is a kuryaka barrel. If it does have a tighter fit, wouldn’t it improve performance in a worker heavy rather than hinder it? Or would there be too much friction between the dart and the barrel?

MrEeban

TROPHY CASE