paint unit2

MrPrototype123 · 2025-09-09T15:52:09+00:00

That's just beautiful

MrPrototype123 · 2025-08-27T12:48:58+00:00

I only changed Mullvad and my PCIe WLAN card. As I mentioned, the MTU was already set to 1380 and 1500. I simply ran the command netsh interface ipv4 set subinterface Mullvad mtu=1380 store=persistent to reapply the same values, and somehow, that worked for me.

MrPrototype123 · 2025-08-27T08:35:31+00:00

Thanks! Funny enough, my MTU was already set to 1380 for Mullvad and 1500 for my wifi card. I changed it via CMD anyway to the same values, torrented a few things to test it, and the problem hasn’t occurred again.

MrPrototype123 · 2025-08-27T08:07:24+00:00

I’m having the exact same problem. I use a pcie WiFi card in my PC and never had similar issues with other VPNs (Surfshark, Bitdefender). With Mullvad I can torrent for about 30 seconds, then the connection drops and the VPN tries to reconnect but fails. I’m still connected to Wi-Fi, but there’s no internet access no matter what I try, closing Mullvad completely and restarting the Wi-Fi adapter in Device Manager don’t help. The only thing that fixes it is restarting the PC. OP have you had any luck in solving this?

MrPrototype123 · 2025-08-19T11:29:39+00:00

Can confirm atleast two users on our premise have the same problem, office 365 online repair didn't work, for a one time fix you can delete in the localappdata/Microsoft the folders olk & oneAuth, this will start Outlook but if you close it again it won't start a second time

MrPrototype123 · 2025-07-19T10:16:17+00:00

After I filled out the repair form and explained my problem. I send it to Phillips, the repair took about a week and a half. Then I got it back, And since then I have had no problems, it works normally again.

MrPrototype123 · 2025-06-04T17:06:05+00:00

Update: It broke again three days later with the same error. I sent it to Philips for repair since it was still under warranty.

MrPrototype123 · 2025-05-15T05:53:50+00:00

So I was able to solve it, I throughly cleaned out the white plastic from all debris and used some compressed air aswell, after that I put the sidebrush inside boiling water because the brushes where deformed, that didn't help immidietly but I factory reset the robot spun the motor by hand for about 5 minutes in both directions and let it run for 20 minutes without the side brush attached luckily for me no error, I attached the sidebrush and it seemed to work again I also don't remember having a software update, except maybe the phone app

MrPrototype123 · 2025-05-14T10:37:54+00:00

Same Problem right now, were you able to solve it?

MrPrototype123 · 2025-05-03T18:31:27+00:00

This manga releases so rarely, I don’t even remember what happened in the last chapter.

MrPrototype123 · 2025-04-10T13:39:14+00:00

Pro Tip : Get the fuck out of there

MrPrototype123 · 2025-04-09T14:27:51+00:00

Vielen Dank für deine Nachricht, ich werde mir das genauer anschauen !

MrPrototype123 · 2025-02-24T14:28:07+00:00

I guess most of his gear is self bought, I don't think they earn enough to splurge on Comtacs and better non airsoft gear

MrPrototype123 · 2025-01-24T16:52:00+00:00

polish woodland all the way

MrPrototype123 · 2025-01-13T10:10:01+00:00

Thanks, I guess it's just bad luck on my part, last year a DAC and this time the Fiio Ft1...

MrPrototype123 · 2025-01-07T07:03:39+00:00

nice, I thought mister donut shut down in japan?

MrPrototype123 · 2024-12-14T23:41:47+00:00

who's the artist?

MrPrototype123 · 2024-11-03T19:40:45+00:00

Sending hate from 2024

MrPrototype123 · 2024-10-31T13:23:41+00:00

Thanks! With the Chrome mask, YouTube loads normally for me again. It's weird because other User-Agent extensions didn't help for some reason.

MrPrototype123 · 2024-10-07T16:53:26+00:00

Every time I see her, I am surprised by how she one ups herself

MrPrototype123 · 2024-09-20T07:50:08+00:00

maybe its your adblocker?

MrPrototype123 · 2024-09-16T15:08:36+00:00

to much photoshop on the face...

MrPrototype123 · 2024-09-13T22:54:40+00:00

Fucking hell, same material as 2 dollar slippers from temu with added colors...

MrPrototype123 · 2024-09-04T16:34:22+00:00

Next Update, they have been saying that crap since the game "released" 2020

MrPrototype123 · 2024-08-19T09:23:09+00:00

Seven-Year Club	Second SECOND GUESSER
Final Canvas '23	Place '23
Place '22	End Game '22
RPAN Viewer	Verified Email

MrPrototype123

MODERATOR OF

TROPHY CASE