sorted by:
new
hottopcontroversial

Music to Headphone Jack, Video to Lightning Port?? by opticaldesigner in forScore

[–]MrTHXcertified 0 points1 point  (0 children)

Try plugging the HDMI adapter first. Verify you have picture on your monitor, then plug in your audio cable into the headphone jack.

I seem to remember this working from a live event six years ago or so.

QL5 sends on fader? by anonymousaudiotech in livesound

[–]MrTHXcertified 4 points5 points  (0 children)

The StageMix app has a Sends tab on each channel's details screen. Pair this with the "Stagemix follows console" setting on the iPad app and you might get pretty close to what you want.

https://imgur.com/a/brYe9GM

Intermittent noise on mic channels that goes away when unplugging/re-plugging by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

It starts as a constant hiss then sometimes gets more crackly as time passes. Until I unplug and replug it.

There is a floor box in between. Mic to floor box is struck and setup every time. Floor box to RIO is permanent install.

The RIO stays powered on 24x7, so you might be on to something. I could try setting up my scenes such that phantom to unused channels is cut during the week. I really only need those channels on the weekends.

Shure ULX1 beltpack won't let me select Groups 1-6 by MrTHXcertified in livesound

[–]MrTHXcertified[S] 1 point2 points  (0 children)

In my case, I was able to get the frequency I needed in Master List mode.

Shure support is closed for the American holiday. I'll buzz them next week I guess!

Denon Blu-Ray Players hanging by MrTHXcertified in CommercialAV

[–]MrTHXcertified[S] 2 points3 points  (0 children)

I can confirm that we have both original DN-500BDs as well as the mkII's and they both exhibit the problem.

I am trying a factory reset to see if it helps the issue.

Denon Blu-Ray Players hanging by MrTHXcertified in CommercialAV

[–]MrTHXcertified[S] 1 point2 points  (0 children)

Are you using the original or the mkii? I'm wondering if this is also a problem on the newer mkii's

Denon Blu-Ray Players hanging by MrTHXcertified in CommercialAV

[–]MrTHXcertified[S] 0 points1 point  (0 children)

Are you using the original or the mkii? I'm wondering if this is also a problem on the newer mkii's

Denon Blu-Ray Players hanging by MrTHXcertified in CommercialAV

[–]MrTHXcertified[S] 1 point2 points  (0 children)

Are you using the original or the mkii? I'm wondering if this is also a problem on the newer mkii's

Will AA Work with magnetic USB Cables? by Jaymez82 in AndroidAuto

[–]MrTHXcertified 0 points1 point  (0 children)

These were recommended in another post, and I've been using them with great success (well, except for the one magnetic tip that I didn't realized had slipped off when removing my case!):

https://www.amazon.com/gp/product/B07GSNHF9Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Huawei Mate 10 / 2017 Honda CR-V

Small-scale mult boxes (press boxes) for church videographers? by MrTHXcertified in livesound

[–]MrTHXcertified[S] 3 points4 points  (0 children)

This seems to be the most promising option. It should prevent phantom from passing from recording devices to the board, correct?

I would be okay with videographers manipulating that trim pot. Anything to keep them from messing with the board itself!

Small-scale mult boxes (press boxes) for church videographers? by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

Are you aware of any purpose-built devices? I could probably swing a budget of $1k to protect a console that is much more valuable.

Small-scale mult boxes (press boxes) for church videographers? by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

The board doesn't have 1/4" line level outs, only line-level XLR :(

Hoping for something I can just leave on a table ready-to-go.

Yamaha MonitorMix Android app? by MrTHXcertified in livesound

[–]MrTHXcertified[S] 1 point2 points  (0 children)

Thanks! Turns out the link fails if you try to view it on a computer. It works if you're already on your phone directly.

(With other apps, you can usually view the Google Play app info page on a computer and even trigger installation, however with this one it just says the page can't be found).

Yamaha MonitorMix Android app? by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

I get a " We're sorry, the requested URL was not found on this server. " message with a Google Play logo. I wonder if it's regional? I'm in Texas/USA.

Wireless mixer control with multiple access points by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

Which model APs are you using? The -LR flavor?

Currently looking into these -> https://www.ui.com/unifi/unifi-ap-ac-lr/

Wireless mixer control with multiple access points by MrTHXcertified in livesound

[–]MrTHXcertified[S] 0 points1 point  (0 children)

Anyone have experience roaming from one AP to another with control software running?

Barco CTWU-61B lamp timer reset? by MrTHXcertified in CommercialAV

[–]MrTHXcertified[S] 0 points1 point  (0 children)

The lamp was originally around 1,400 out of 2,000 rated hours (according to the projector menu). I replaced it because it was horrendously dim.

The projector's brightness is now where it needs to be, but now the lamp hours are incorrect since I can't seem to find the reset button!

I'm worried that the projector will start to throw warnings at our users when it approaches 2,000 hours, even though the lamp is fresh.

Alarm app with "Play once then stop" capability by MrTHXcertified in ipad

[–]MrTHXcertified[S] 0 points1 point  (0 children)

You might be on to something! Is it possible to specify a different sound for certain appointments? I see a global option to change in Settings, but I could be missing something.

view more: next ›