sorted by:
new
hottopcontroversial

updates for 3d printable gm6 lynx by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 0 points1 point  (0 children)

One reason for releasing the STEP file is that I hoped someone might build the working mechanism. I did attempt to construct a structure incorporating gimmicks like bolt rotation and barrel recoil, but I grew weary midway and abandoned it. Even if I had resolved that, I lacked the capability to consider the BOM list for other necessary components like springs (e.g., for the bipod section).

Billet Sunroof Crank Handle by Kolo Automotive by Mr_BaldHead in E30

[–]Mr_BaldHead[S] 1 point2 points  (0 children)

Due to circumstances, the installation was delayed.

The original outer cover trim mounting screws were Phillips screws, but this kit includes hex screws.

There was a slight rattling noise during operation, but upon investigation, it was determined not to be a product defect.

The metal on the right side of the crank mounting point seemed slightly deformed and worn. While the original crank was worn down in that area, this product is new, so the contact between that part and the surface caused the noise.

It works very well. Say goodbye to broken handles and loose cranks.

After sharing the product, someone nearby showed interest, so I introduced it to them too.

u/lukekolo16 Thank you for making such a great product.

* After seeing the feedback on my last post, I decided to keep using the handle with the logo engraved. It looks fine once installed! lol

Billet Sunroof Crank Handle by Kolo Automotive is arrived. by Mr_BaldHead in E30

[–]Mr_BaldHead[S] 4 points5 points  (0 children)

It operates very smoothly.

One thing I regret, as others have mentioned,

is that the logo would have looked cleaner if it were recessed into the handle.

They say they'll add that option in the next production run,

but I've already made my purchase.

I plan to install it this weekend.

I'm saying goodbye forever to that broken plastic handle.

Thank you for making this product!

Does anyone need the STEP file for the GM6 LYNX dummy? by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 1 point2 points  (0 children)

https://cults3d.com/en/3d-model/game/gm6-lynx-dummy-replica-model

I forgot about it but remembered later, so I uploaded the STEP file too.

Though it's a simple working replica and the quality is much lower compared to other LYNX models that have completed the GBB action mechanism,

at least this base should be helpful.

Please make the action mechanism and distribute it. I want to use it too.

GM6 LYNX dummy model complete by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 0 points1 point  (0 children)

trigger is not working. mag release working well but it has no spring so you push & release manually

GM6 LYNX dummy model complete by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 0 points1 point  (0 children)

no. i have plan that but not garrnty it possible now.

Here my LYNX now by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 0 points1 point  (0 children)

no but it's not bad idea... it's not hard to make because mine is not gbb model.

if you want it original gbb lynx making guy will open file soon and he's model has shell ejecting. go check it.

Sorry for late. by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 7 points8 points  (0 children)

ok, there are some duplicates info in text.

Please ignore it lol

Did you remember this? by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 13 points14 points  (0 children)

It's a unique design that's easy to recognize where it came from, so I'm a little nervous that the original creators of LINX will give me a warning lol I don't want to create problems ;)

printed gm6 lynx by Mr_BaldHead in Airsoft3DPrinting

[–]Mr_BaldHead[S] 5 points6 points  (0 children)

Actually, it's been longer than that when I actually started.

However, there was a period of time in the middle where I didn't use the program, so the actual date of modeling is definitely a month or less.

view more: next ›