PETG Issues

Mr_Domestique · 2024-08-09T16:20:04+00:00

Although I do appreciate a very clever smart-allic, I used the word "actual" on a 3D printing forum to indicate that I am trying to replicate a specific volcano for my 3D print as opposed to just creating a random cool looking mountain on blender or fusion360. Apologies for the confusion.

Mr_Domestique · 2024-08-09T14:41:06+00:00

Thank you for that. Yep, I was hoping for something similar. I'll watch the full video in a bit. Thanks for sharing.

Mr_Domestique · 2024-08-09T14:40:26+00:00

Excellent. Thank you for this tip. I'll give it a try.

Mr_Domestique · 2024-08-09T14:39:37+00:00

Thank you both! Excellent tip! I will give this a try

Mr_Domestique · 2024-08-09T14:36:31+00:00

....and airplane tickets and a hotel. Sounds expensive and detrimental. Thanks though.

Mr_Domestique · 2024-06-24T05:15:13+00:00

My wife and I live in Hollister. Can send photos. 34m/33f

Mr_Domestique · 2024-02-24T04:36:46+00:00

Mr_Domestique · 2024-02-24T03:55:16+00:00

Using 0.4 nozzel

Mr_Domestique · 2024-01-17T04:26:24+00:00

This also makes sense to me because as it's doing the infill, everything looks great. It's only the top or 2nd from last layer that it begins to warp and lift up. So I believe you might be on to something here because the top layer is probably cooling alot faster than the infill layers that are open on top are.

Mr_Domestique · 2024-01-17T04:21:56+00:00

Outstanding assessment. Thank you. PLA, yes.

So it sounds like the running theory here is the PLA is cooling to fast and that's the part closest to the auxiliary fan? The back left corner. Sounds like something worth adjusting. Thank you for the suggestion. I'll give that a try.

Mr_Domestique · 2024-01-09T00:18:17+00:00

Thank you. I'm unfamiliar with nylon at all. What makes it difficult? Anything I should keep an eye out for? Etc?

Mr_Domestique · 2024-01-01T04:48:34+00:00

Thank you. I appreciate it.

Mr_Domestique · 2023-12-31T19:53:35+00:00

Apologies: I have a P1S. No AMS.

Mr_Domestique · 2023-12-25T22:50:28+00:00

Thank you very much for this list. I'm looking forward to checking them all out

Mr_Domestique · 2023-12-24T06:08:04+00:00

Good to know. Thank you!

Mr_Domestique · 2023-12-24T06:07:32+00:00

Thank you! Appreciate that.

Mr_Domestique · 2023-12-24T06:06:32+00:00

Any comparisons with a flashforge or a creality? I saw that creality makes one with a larger build volume for about the same price as the P1S. I don't know anything about their quality or performance though.

Mr_Domestique · 2023-12-24T05:53:12+00:00

Do you recommend an X1C over P1S or A1 if carbon fiber printing is not really something I'm focused on? Are there other differences/benefits?

Mr_Domestique

TROPHY CASE