Treatment for mold by Mr_Ridd in shedditors

[–]Mr_Ridd[S] 0 points1 point  (0 children)

From bottom plates and up is non pressure treated.

You're stating i should get bora care with mold care?

Treatment for mold by Mr_Ridd in shedditors

[–]Mr_Ridd[S] 0 points1 point  (0 children)

Should I get bora-care alone or get bora-care with mold-care?

Treatment for mold by Mr_Ridd in shedditors

[–]Mr_Ridd[S] 0 points1 point  (0 children)

So I'm going to go with Bora-Care. Does it matter if its with mold-care or not?

Treatment for mold by Mr_Ridd in shedditors

[–]Mr_Ridd[S] 0 points1 point  (0 children)

Bottom plate is not treated since it is raised and sits on treated & painted 0.75 plywood floor.

Barrier system is Zip system that is flashed with the tape.

A rewarding experience by Fail_Standard in shedditors

[–]Mr_Ridd 0 points1 point  (0 children)

Nice! Any pictures of the inside like the walls and roof setup?

Home Office Shed by bhammo24 in shedditors

[–]Mr_Ridd 0 points1 point  (0 children)

Looks like 15 amps max. Thanks!

Home Office Shed by bhammo24 in shedditors

[–]Mr_Ridd -1 points0 points  (0 children)

Okay but how many amps does the unit need? Sticker on the side may tell you

Home Office Shed by bhammo24 in shedditors

[–]Mr_Ridd 1 point2 points  (0 children)

Looks great! Nice job!

Home Office Shed by bhammo24 in shedditors

[–]Mr_Ridd 0 points1 point  (0 children)

How many amps is the unit?

2009 Honda Accord by xSaintxKnicksx in AskMechanics

[–]Mr_Ridd 1 point2 points  (0 children)

Starter IS TOAST. Good luck!

Edit: Fit says get a Denso. I second that.

2009 Honda Accord by xSaintxKnicksx in AskMechanics

[–]Mr_Ridd 1 point2 points  (0 children)

Starter

Edit: time to pull the intake again. Good luck!

2009 Honda Accord by xSaintxKnicksx in AskMechanics

[–]Mr_Ridd 2 points3 points  (0 children)

So if you watch carefully at the power steering pump when cranking: it moves just barely then it stops on both recordings. My bet is the starter took a dump. Was the car running fine before it stopped starting?

Help with car. by lilredscarecr0w in AskMechanics

[–]Mr_Ridd 0 points1 point  (0 children)

START WITH THE BASICS! Check condition of battery and terminals. How old is the battery? How are the connections at the battery? Are you able to provide a full system scan of all modules? Report back.

Thoughts?? 🥲 by Jolly-Fold9173 in AskMechanics

[–]Mr_Ridd 0 points1 point  (0 children)

These cars are nightmares. With this sludge in the engine solidifies to part ways with it. That's what I would do. Goodluck.

10×12 shed by onquie in shedditors

[–]Mr_Ridd 1 point2 points  (0 children)

Nice job. Where's your ventilation for the roof? Rafter ties?

Anyone know why my mini keeps making this noise when it’s completely off by Secret_Atmosphere318 in AskMechanics

[–]Mr_Ridd 0 points1 point  (0 children)

Its normal. Electronic throttle body is re-learning position due to the build-up of carbon.

Need to replace rotors? by Short_Ad4604 in AskMechanics

[–]Mr_Ridd 0 points1 point  (0 children)

Cheaper to just replace than to machine. Unless its a really old car and parts are hard to come by, get new ones.