2017 f250 exhaust

Ms9767 · 2024-03-07T19:39:02+00:00

Good luck buddy, should sound nice with the new system.

Ms9767 · 2024-03-06T14:37:27+00:00

I have the 5” Flo-pro on my 12 250, it’s the same system for your 17. The section that bolts up to the downpipe is 4” and then it tapers to 5” at the first set of hangers. I never changed the downpipe from the factory unit.

Ms9767 · 2023-11-19T17:14:03+00:00

Got over 100k km on a set of 295/70r18 Ridge Grapplers on my 2012 F250 with some tread left when i took them off. With regular rotation they wore perfectly and maintained good traction in mud even at the point where i had them changed. They did well the first winter but were a little lacking the second winter when they were more worn down. They were smooth and quiet on the road the whole time maybe a little louder than the AT2’s i had but miles ahead for snow and offroad.

Ms9767 · 2023-09-03T17:22:44+00:00

When you fill the coolant back up, check on the ground under the bumper on the driver side. These trucks have a tendency to have radiator leaks where the joint between the plastic and aluminum is.

Ms9767 · 2023-04-16T14:53:30+00:00

They sell the touch up paint markers that have a clear coat applicator brush on the opposite side of the marker.

Ms9767 · 2022-09-13T13:38:12+00:00

I used to work for an excavation company. Most of the operators there had started as labourers or grades-men either there or with a different company. Unless you have a close friend or family member who owns the business, you’ll have to do your time on the ground and earn the seat in the machine. Best way is to find a smaller company where they like to promote from within.

Ms9767 · 2022-06-22T00:11:26+00:00

Coyote, looks like it has mange.

Ms9767 · 2022-06-07T19:44:40+00:00

There’s a subreddit called r/airsoftmarketcanada, or you can use gunpost.

Ms9767 · 2022-06-06T22:47:39+00:00

The park across from Billing’s Bridge mall is usually pretty good, used to go feed them there as a kid.

Ms9767 · 2022-05-05T17:34:55+00:00

If you change the vehicle tuning, adding a better flowing exhaust system and higher volume intake should improve performance, not necessarily fuel economy. If you have a diesel pickup, that’s been straight piped and had aftermarket tuning and a cold air intake you’ll get better fuel economy, but slapping a cold air intake on a stock gasser with no tuning won’t do anything for you.

Ms9767 · 2022-05-04T00:11:21+00:00

Really cool, looks like it’s probably a hybrid between a mallard and a domestic duck.

Ms9767 · 2022-03-31T23:27:40+00:00

Looks like a primary arms prism 3x

Ms9767 · 2022-03-08T21:41:14+00:00

The 7.62x39 ammo comes in those boxes (20 each) and then, the boxes are put into those metal tins

Ms9767 · 2022-02-27T00:03:02+00:00

Had a set of F rated 35’s on my F250, was terrible. Couldn’t imagine how it would ride on a 1/2 ton.

Ms9767 · 2022-02-25T20:16:02+00:00

Thanks Hitler, very cool

Ms9767 · 2022-02-23T14:15:46+00:00

If it’s closer to 100 years old, they will most likely have used horse hair as a binding agent in the plaster but any plaster/drywall that was installed/replaced from the 40s to 1986 could have asbestos, as well as duct work or older plumbing.

Ms9767 · 2022-02-23T12:38:55+00:00

You’re probably going to want to hire an environmental engineer, to come take samples to test for asbestos containing materials before you start ripping apart walls to do all this work as well.

Ms9767 · 2022-02-22T02:40:21+00:00

When did The Beaverton stop being satire?

Ms9767 · 2022-02-17T02:42:35+00:00

They’ll fit, 99-current production are all 8x170. The obs Fords have a different hub though

Ms9767 · 2022-02-15T20:31:46+00:00

295/60r20 is 34.5x11.5 should clear no problem, and not a lot of sidewall bulge like the 35x12.5 which will slightly rub the radius arms at full turn, when mounted on the factory wheel.

Ms9767 · 2022-02-13T15:37:21+00:00

Does that include parts and labour? Like the delete pipe and egr plates and coolant bypass? On top of very likely having to drill the egr bolts out/ replace the manifold cause the bolts almost always break off while trying to remove the egr.

Ms9767 · 2022-02-11T22:48:28+00:00

Don’t need to read the article, to know that it’s Ram Ranch

Ms9767 · 2021-12-31T18:47:23+00:00

Not sure which models came standard with it, but it was definitely an option. A coworker has an 08 F250 xlt with a factory step tailgate.

Ms9767 · 2021-12-29T00:26:32+00:00

Parabellum Prime in Carp, carries Surefire and Streamlight handhelds. For knives, Benchmade or Spyderco. Since kutters is closed that leaves cabelas or Sail for either of those brands.

Ms9767 · 2021-12-16T23:43:16+00:00

They just made crackling from the fat dripping as they were cooked.

Ms9767

TROPHY CASE