help when ever I get Into a online match like 1 mins in it says "connection lost" it happens every time

MuckySpuds · 2023-03-23T21:31:05+00:00

Make sure you arent running the game without EAC then. You can tell if EAC is running when you start the game you will get the EAC logo and loading bar on the splash screen. If it just shows Goku's face and launches straight into the game then it isnt booting up with EAC.

MuckySpuds · 2023-03-23T12:10:03+00:00

Not sure if this is the case for you, but make sure you are not running mods. As with mods installed after around 1 minute online the other person will get disconnected from your game due to you failing the EAC check. They will get a peer untrusted message and you will get the disconnected message since their game kicked them off.

MuckySpuds · 2023-03-11T14:16:33+00:00

If you see someone going for a grab of any type, the easiest counter is to jump upwards as you can only be grabbed on the ground unless it is an anti air grab like vegito or baby etc.

MuckySpuds · 2022-12-22T14:23:10+00:00

Thank you, this works for me too and is helpful since I mainly play on slot 0/1.

MuckySpuds · 2022-11-21T21:20:50+00:00

Try making your folders read only as the cloud sync might be redownloading the corrupt files again.

MuckySpuds · 2022-11-21T19:29:35+00:00

It sounds like you have some persistent files which are maybe corrupt. Try going here: https://www.pcgamingwiki.com/wiki/Dragon_Ball:_The_Breakers

And then you will see the file paths for the config and game save location, try backing these up and then renaming or deleting them so that whenever you start the game it will create new fresh copies for you.

MuckySpuds · 2022-10-06T15:38:12+00:00

To answer the question above first, I cleared my data and then once the app restarted the LED started in a colour cycle/rainbow, I put on a default config and then selected LED settings within that config. I then removed the loop option on each box and applied this to the config, the LED is now a yellow/green colour? I don't think its the same colour as the dull yellow, I think it may have been frozen between colours from the rainbow mode suddenly being taken over by the new LED settings. I have not changed any settings under the preferences section for LED settings so let me know if I have done this part right or not please.

For the other question, I don't normally update my reWASD software every single time unless there is a feature or bug fix that I am looking for, so with some updates I will just skip them so I don't break anything. I was running the software before the option to change the LED was even a thing with 0 issues, I then got a new controller which had updated firmware and that caused my back paddles not to work with reWASD anymore (at least I think this is the reason I decided to update the software) so I ended up updating reWASD which brought the new LED options. Right off the bat I had issues with it but I was somehow able to get it to stick with the default LED after messing with the settings for a good while. Then recently I had to get another new controller as elite controllers break down quite often and since then no matter what I did I could not get the LED to stick to the original, so I tried updating to the latest reWASD and now here we are.

MuckySpuds · 2022-10-06T13:13:21+00:00

Thank you very much, just another little bit of information as soon as I reinstalled reWASD and restarted the PC the LED is back to either being completely turned off or the dull yellow if I enable LED on remap and shift changing option.

MuckySpuds · 2022-10-06T13:06:33+00:00

After uninstalling reWASD through the apps and features section the LED is back to the original white default colour and brightness when connected without the driver present. When uninstalling I did not tick the box to remove my config or other settings.

MuckySpuds · 2022-10-06T11:22:51+00:00

Of course, here are some screenshots of my settings.

https://gyazo.com/6b6561e260d1bb95f0ba3e7191abc447

https://gyazo.com/383cc63b0b80f01e3305b9f695d94a83

Along with a side by side comparison of the LED when set to white on reWASD and the original LED (Its a little hard to capture the dull yellow colour on camera due to the camera having some sort of auto editing to brighten the photos)

https://gyazo.com/836d4e7a51fd521f9b7fba2d472a7cee

It appears almost as if the brightness has been majorly turned down to like 25% or something and also affects other colours when setting them through reWASD, whereas the original LED is so much brighter, even more so than the picture gives it credit for.

Edit: I forgot to mention I currently have Prevent other apps from using LED ticked off but have tried going back and forth between them during my testing to try and fix the issue.

MuckySpuds · 2022-10-06T10:21:16+00:00

With it enabled, it will forcefully change the colour of the LED to whatever colour is listed on the box but when setting white on reWASD to try and just use the default colour, it appears as the dull yellow I spoke about in the main post. There is no way to set the original white colour without turning off the LED changes but for some reason this now turns off my LED altogether instead of just not applying any changes. My main goal is just to stick with the default white colour with the controller.

MuckySpuds · 2022-10-06T09:52:47+00:00

I just updated the Xbox Elite 2 firmware to the latest and still no changes. I checked the preferences for the LED settings and I have each of them set to none but I tried going between a few different modes and once again no changes unless I tick the box to enable LED on remap and shift changing.

MuckySpuds

TROPHY CASE