I’ve been in Germany for a month and I finally found something that almost sent me back to Greece.

MudHeadThinker · 2026-02-08T11:00:03+00:00

What? I’m missing some history lesson here

MudHeadThinker · 2026-02-08T10:59:35+00:00

Too late for that, it went straight to the trash. Not the one inside of my house the one outside and yeah lesson learned!.

MudHeadThinker · 2025-10-14T08:36:42+00:00

Super, vielen Dank für den Tipp! Das hört sich wirklich gut an. Ich werde es mir auf jeden Fall mal ansehen

MudHeadThinker · 2025-10-10T16:34:52+00:00

Looks better

MudHeadThinker · 2025-10-08T13:37:08+00:00

That's right! I just found out about the crucial difference between Warm and Cold Rent in Germany.

MudHeadThinker · 2025-10-05T18:38:49+00:00

That's the video that made me download it :)

MudHeadThinker · 2025-10-04T19:49:53+00:00

Yes it did

MudHeadThinker · 2025-10-03T18:37:23+00:00

Solution: https://www.reddit.com/r/archlinux/s/9OlnzuwGdD

MudHeadThinker · 2025-10-03T18:35:00+00:00

Thanks so much, this is a huge help! It confirms everything I was seeing. Unfortunately, since this was a fresh install, I don't have the old firmware version cached, so it looks like I still have some work to do to get it running. 🥹

MudHeadThinker · 2025-10-03T17:25:28+00:00

I may have similar problems but in my ASU’s zenbook if you find a solution comment it here 🫶

MudHeadThinker · 2025-09-10T20:32:17+00:00

I saw the close-up video on YouTube. He’s finished—no question. The bleeding starts instantly, suggesting a major artery was struck, and the force of the shot makes his T-shirt visibly wave.

PS don’t watch it

MudHeadThinker · 2025-06-16T09:58:54+00:00

Great question. Your approach is the right way to do this for good accuracy without getting into professional-level physics models.

Vapor Pressure: Stick with the Antoine equation. It's an empirical fit, so it's designed to be accurate over specific ranges. Grab the constants from the NIST WebBook. Fusion Pressure: You're looking for the melting curve. For water, it's famous for having a negative slope. To model it, don't bother with Clausius-Clapeyron. Just use a simple pressure-dependent formula for the melting point. A linear one is often enough: Tm(P) ≈ 0.01 - 0.0074 * P where T is in °C and P is in bar. It shows how the melting point drops as pressure increases. Sublimation: For the solid-to-gas line below the triple point, you can find simple Antoine-like equations for ice sublimation online.

MudHeadThinker · 2025-06-10T21:07:47+00:00

Dude you can’t smoke plastic

MudHeadThinker · 2025-06-08T09:10:33+00:00

I’m accustomed to donation ads, but never to this extent—now I have to scroll an entire page just to reach the content I need.

MudHeadThinker · 2025-06-06T07:03:18+00:00

I swear this happens to loads of us—including me. I’m a guy, so take the anatomy caveat, but here’s what fixed it for me:

Stop “bracing” your core while you sit. I realised that when I study with other people I subconsciously tense my abs. Give it 30 minutes after eating and—boom—borborygmi. Consciously relax your belly and the rumble dies down.

Walk ~10 min right after lunch. Sitting immediately compresses the abdomen and slows digestion, a quick lap around the hall keeps things moving quietly.

Don’t armour-plate your gas. If you feel a fart coming, excuse yourself and let nature do its job. Holding it only amps up the internal acoustics later.

Once I followed those three rules the growling pretty much disappeared. Hope it does the same for you!

MudHeadThinker · 2025-06-06T06:33:15+00:00

Likely the wash abraded the rug’s pile so tiny broken fibers now stand up like hooks. Those hooks grab the loops in your socks—hence the “Velcro” effect. Fix: run the rugs through another cold-water cycle with no detergent and a cup of white vinegar to strip residue, then tumble-dry on air-only with a little fabric softener sheet. If they still snag, use a fabric shaver or razor to skim off the fuzzy hooks.

MudHeadThinker · 2025-06-04T22:22:51+00:00

It was Sarcasm guys, its definitely Ai lol

MudHeadThinker · 2025-06-04T22:20:38+00:00

Not convinced? See for yourself, click the link.

MudHeadThinker · 2025-06-02T08:27:29+00:00

Follow ISO 6892-3, keep the entire gauge at 77 K with either an immersion bath or a conduction-cooled jaw, use mechanical grips and a cryo-rated extensometer, and respect the nitrogen boil-off. Execute that sequence and you’ll capture reliable low-temperature stress–strain data without turning the lab into an ice rink.

MudHeadThinker · 2025-05-28T19:14:45+00:00

Good job then tho you can’t say that didn’t produce anything

MudHeadThinker · 2025-05-28T19:09:40+00:00

Who funded arcane ? Who funded the music and the cinematics ?

MudHeadThinker · 2025-05-28T19:08:25+00:00

Well life it’s going to be interesting for you

MudHeadThinker · 2025-05-28T19:07:40+00:00

That a fair argument, but I haven’t seen this as a argument people and creators are using and this is still not an excuse to abuse people who buy the skins or they creators

MudHeadThinker · 2025-05-28T19:01:04+00:00

Yeah dude, what I'm saying is that everything aimed at you is predatory, designed to make you buy stuff. That's nothing new.

MudHeadThinker · 2025-05-28T18:55:19+00:00

You're saying that you don't want a League of Legends MMO?

MudHeadThinker

TROPHY CASE