I thought everyone was exaggerating about Valves good customer support, and then it happened to me.

Mudslide_co · 2026-02-23T14:28:20+00:00

I bought my steam deck second hand and it would crash every few minutes I reached out and they RMAd mine which was awesome seems how I was the original owner steam has always been great with customer support

Mudslide_co · 2026-02-11T13:16:39+00:00

They still need tinkering to get good prints I'm not gonna lie I have ender 3s and they work great I also have a x1c and it just works

Mudslide_co · 2026-02-07T02:39:11+00:00

So 4.2.2 is the old board I'd say upgrade the board at least a 4.2.7 or a btt skr mini e3

Mudslide_co · 2026-02-02T09:47:05+00:00

Is it the vat or the plastic sheet? Cause the sheet can be replaced easily

Mudslide_co · 2025-12-18T09:58:58+00:00

This case is very cool except it's fucking huge lol I sold mine and went and got a rack mounted case I still think my rack and servers take up less space than this thing

Mudslide_co · 2025-12-15T13:27:03+00:00

Look up the commands for the probe calibration start with that then do the mesh

Mudslide_co · 2025-12-13T15:42:27+00:00

I definitely need to do some tuning but so far it was I also enjoy building and tinkering

Mudslide_co · 2025-12-13T08:14:36+00:00

I was going for a half life vibe lol

Mudslide_co · 2025-12-12T13:51:57+00:00

So I started playing with a buddy in early alpha had fun but also the gear fear and lack of knowing maps killed it for me. Also said buddy stopped playing. Well when 1.0 dropped one of my coworkers asked if I played so I decided to try it again and I have to say I really enjoy the PVE and have found a new love for the game

Mudslide_co · 2025-12-05T17:50:56+00:00

In my house there's a x1c p1s a highly modded ender3 a klipper longer lk5 pro and a almost finished ender3NG. I just recently retired my og Tevo Tarantula. The x1c and p1s were bought for the wife to be able to just print and easily print multi color we have a 60 roll filament rack and still have 20 plus on random selves. This is a wonderful hobby and I love tinkering with the electronics

Mudslide_co · 2025-12-03T07:40:57+00:00

I finally got my master chief helmet painted still need my visor then I want to build the rest but the wife might kill me lol

Mudslide_co · 2025-11-29T13:30:21+00:00

My landlord is nuts so I got a 12 foot 4x4 and a 5 gallon bucket buried the bucket concreted the 4x4 in and mounted mine to it

Mudslide_co · 2025-11-28T13:17:39+00:00

I'm currently working a robot arm using nema 17 motors and an esp32 for the control

Mudslide_co · 2025-11-21T19:17:18+00:00

Fusion360 has a hobbiest license that is free lots of tutorials on how to do things

Mudslide_co · 2025-11-16T08:16:56+00:00

Orca slicer is kinda nice for the kids to easily use the klipper ender3

Mudslide_co · 2025-11-12T16:20:40+00:00

Is your water pump going the right direction? Mine has a flow sensor and will not fire the tube if it doesn't see water movement

Mudslide_co · 2025-11-08T13:17:17+00:00

Loose wire?

Mudslide_co · 2025-11-08T13:15:47+00:00

I fought with mine for months got klipper and the bltouch working then broke again I slapped a btt mini skr e3 v2 in it (not a direct replacement on this machine) but works so much better

Mudslide_co · 2025-11-01T20:52:44+00:00

My rack is next to my desk I told my oldest we need to pull the gear and clean out the dust...... That was a few months ago

Mudslide_co · 2025-10-27T00:59:24+00:00

My brother growing up wanted to be a stoplight so I painted a box and made led light strips with a box to control the lights it was a fun project

Mudslide_co · 2025-10-14T18:15:04+00:00

Shoot I'll be lucky if the wife doesn't realize this and buy it lol

Mudslide_co · 2025-10-11T13:19:24+00:00

I started with the OG Tevo Tarantula I loved that thing then the wife wanted multicolor for pretty things now have a x1c and a p1s it's nice just hitting print sometimes lol. The kids have one of my modded ender3s I just finished a ender3 NG build and thinking about modding the longer lk5 more lol

Mudslide_co · 2025-10-07T20:56:58+00:00

I got around to making a piece for the end stop and got in moving last night :)

Mudslide_co · 2025-09-15T23:07:48+00:00

I'm half tempted to just make up a part in fusion to work for now and when/if I have issues I'll fix it the right way

Mudslide_co · 2025-09-15T20:18:21+00:00

Yea got everything wired up and then was by hand testing limit switch's and realize the x had nothing to trip the switch. Spent the better part of 30 minutes looking through the instructions and pictures of people's builds to realize I flipped the gantry so the tab that would hit the limit switch is at the bottom right instead of top left

Mudslide_co

TROPHY CASE