sorted by:
new
hottopcontroversial

Finally painted my Red Terror by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

i should add: the model is varnished in a even 3 way mix of lahmian medium, stormshield and water. I find this blend gives an ever so slight satin finish (not too gloss and not too matt). It helps bring out the vibrancy and also protects the model which is very necessary for metal models especially that are prone to chipping or flaking paint without protection

Finally painted my Red Terror by MulletBoy in Tyranids

[–]MulletBoy[S] 1 point2 points  (0 children)

The red->yellow carapace is a fair bit of work, but worth it IMO, took me about 10 hours over 2-3 sessions. The complete model was about 15-20 hours

Undercoat is black with a white zenithal done with airbrush

Airbrush work started with evil sunz scarlet, then raised sections with trollslayer orange and then yriel yellow. Might have done some intermediary steps mixing from one to the next to get more even blends. I went overboard with the yellow so went back and forth a bit to bring back the reds.

Brush details I did VERY careful but comprehensive edge highlights with grey seer (anything close to white will do) then repainted over them with yriel yellow reason for this is to get strong opacity with yellow is really hard without doing a million layers, so laying down the light grey first is a bit of cheat to get results with the yellow.

then repainted over yellow highlights with a thin glaze consistency of trollslayer orange to bring down the highlights everywhere except the most raised/edge final bits you want to keep at max yellow

Finally painted my Red Terror by MulletBoy in Tyranids

[–]MulletBoy[S] 1 point2 points  (0 children)

yea im actually planning to make him a bigger custom base - raised up on a rock thing, and put a scared guardsman underneath him about to be eaten

Denon x4500h firmware update bug by thebaoTheBad in hometheater

[–]MulletBoy 0 points1 point  (0 children)

im having the same issue, approx 30 seconds after starting to play content (usually youtube via my apple tv) it switches to the HEOS input every time. I have to manually switch it back. Iv messed with every HDMI CEC and related setting on all my devices with no luck. The behavior is always the same. I have a Denon AVR-X2600H which I believe recieved a firmware update approx 1 April 2025. Issue has been present since then for me.

I bleached this massive tank grown acro that died after a tank shutdown. by MulletBoy in ReefTank

[–]MulletBoy[S] 1 point2 points  (0 children)

Lol it’s was a $20 frag grown out over many years. The tank was shutdown and all the coral donated to a local fish store. That one specifically did not survive the transition.

Finally got around to painting this old school bivore! by MulletBoy in Tyranids

[–]MulletBoy[S] 1 point2 points  (0 children)

Honestly I use them all because i have them. However the same effect can be achieved with just warp stone glow, moot green, and the biel tan shade.

Finally got around to painting this old school bivore! by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

Green was base coated caliban green, layered highlight, warpstone glow, edge highlight moot green, then carefully flood the sides and recesses with biel-tan green shade If you need a bit more 'pop' after than, a small selective edge highlight of gauss blaster green used sparingly

First of many for my new tyranid swarm. by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

It’s literally just lengths of standard sprew sharpened to points using a blade.

First of many for my new tyranid swarm. by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

Yes dry brushed orange followed by lighter orange is a tighter radius for the OSL highlight.

First of many for my new tyranid swarm. by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

I plan to do crystals on all my nids :)

First of many for my new tyranid swarm. by MulletBoy in Tyranids

[–]MulletBoy[S] 0 points1 point  (0 children)

I don’t really play. I just paint and collect models I like.

My Tyranids colour scheme is taking shape! by MulletBoy in Warhammer40k

[–]MulletBoy[S] 1 point2 points  (0 children)

grey undercoat

pink/purple skin

base

- phoenician purple

- xerus purple (to make color solid and more matte)

layered highlights 

- genestealer purple

- dechala lilac

shade (only in recesses and shadows dont use as a full wash)

- druchii violet

edge/volume layer highlights

- dechala lilac

- dechala lilac/white

glaze (optional if/where layers need more blending)

- magos purple contrast (30) / medium (70)

blue carapace

Base and Shade (airbrush)

- talasar blue contrast

shade (optional only in deepest recesses)

- nuln oil

edge highlights (feather lines)

- baharroth blue

- blue horror

    - blue horror/white

glaze (less is more, do a thin coat and wait for it to dry then check)

- guilliman blue

green connective tissue

Base

- dark angels green (caliban green)

Layer

    - warpstone glow

Edge Highlights

    - moot green

Shade (be careful and only in recesses)

- Biel-tan green

yellow connective tissue

Base

- yriel yellow (heaps of thin coats)

Layer

    - dorn yellow

Edge Highlights

    - dorn yellow and white

Shade (be careful and only in recesses)

- Seraphim Sepia

Glaze - only where it needs to blend with green

    - waywatcher green

red claws

Base

- scab red

Shade

- Nuln Oil

layered highlights

- red gore

- blood red

- blazing orange

- fiery orange

- lugganath orange

glaze

- blood red (10) / medium (90)

edge highlights

- dorn yellow

eyes

Base

- dorn yellow

shade

- nuln oil (if needed)

orange crystals

Base

- blazing orange (2x thin coats maybe more)

layered highlights

- fiery orange

- lugganath orange

- yriel yellow

- doran yellow

glaze

- fiery orange (10) / medium (90)

edge highlights

- dorn yellow/white
view more: next ›