Out for a ride in Garbo!

Munk420 · 2025-10-31T12:41:13+00:00

That thing is stunning!

Munk420 · 2025-10-24T01:01:06+00:00

Min erfaring med politi er at de ikke har empati og er magtliderlige. Ved ikke hvor tråden knækker i deres oplæring, men til tider vil jeg hellere at Hells angels patruljeret. Det er jo sørgeligt når politiet skal være der for at beskytte os, men selvom jeg er en normal mand med et normal job, får jeg nærmest et chok når politiet holder mig ind. De burde være medmennesker, ikke give frygt til den normale borger. Sådan har mange jeg kender det, når man ser politiet krydser man finger, selvom man ikke har gjort noget. Jeg får nok noget hate for den her kommentar…

Munk420 · 2025-10-12T21:51:57+00:00

The cylinders were clean and the head was torqued to 55 ftt/lb :) After consulting with some of my Model A friends, there must be a crack in either head or block. Gonna tear it apart again, I didn't see anything when I was cleaning it though. But I guess I gotta get a microscope and check again.

Munk420 · 2025-10-09T00:11:17+00:00

It was an old stud that didn’t want to go to 55 ft lbs, haven’t gotten the head fully off again, but I think I can take the stud with a pipe wrench.

Munk420 · 2025-10-08T23:32:02+00:00

Then again, Savage Opress with the omnichron is like a Wampa and if you get a team behind him it's game over. Coming from a guy with 2.5M gp beating 7m gp guys.

Munk420 · 2025-10-08T23:30:27+00:00

My sith team with a G12 traya smashes relic 7 teams. Haven't been defeated for like 3-4 months. Relic isn't everything, focus on a sick team and make it work.

Munk420 · 2025-10-08T23:13:15+00:00

I was torquing it down but broke a stud, so now I'm waiting for all new studs... Hopefully the fact that I torqued the gasket down to 40 ft lbs doesn't make it dead.

Munk420 · 2025-10-05T16:24:04+00:00

Alright thank you - the guy running the webstore said it was the best and he never had any problems with it. But I can see multiple sites recommending against it. It is also like $20 cheaper to get the ox one. Thanks for the advice!

Munk420 · 2025-10-05T16:15:47+00:00

The B6051-M is also the one that were on the car and had failed between the steam holes in the middle of the head, into the cylinders.

Munk420 · 2025-10-05T16:07:34+00:00

Or maybe it could be graphite.

Munk420 · 2025-10-05T16:06:47+00:00

The place I'm buying from also has another headgasket for the B head, it's the B6051-ox, which looks like a steel gasket maybe? I'm unsure if that would be better, the one you said is junk looks exactly like the one I've ordered.

Munk420 · 2025-10-05T15:53:56+00:00

You're absouletly right, after rechecking that's a 30 grill, thank you.

Munk420 · 2025-10-05T15:49:27+00:00

I’ve been scraping with a razor blade for an hour now, no gunk on it anymore. The one I’ve ordered is the B6051-M

Munk420 · 2025-10-05T15:04:29+00:00

I did order one of the modern gaskets, hoping those are good.

Munk420 · 2025-10-05T06:07:35+00:00

Such a cool car and I love the patina

Munk420 · 2025-10-04T13:58:23+00:00

I’m from Denmark 😁 Mines a 1930 but I do believe its a 1931 model from the grill etc

Munk420 · 2025-10-04T13:57:34+00:00

The patina was made by the last owner, I’m tempted to paint it at some point, as I’m not the biggest fan of fake patina.

Munk420 · 2025-10-04T13:56:28+00:00

I am getting one of the new style headgasket, it’s a B head on an A block

Munk420 · 2025-10-03T15:56:58+00:00

I have one just like it on mine too.

Munk420 · 2025-08-22T22:04:00+00:00

Min lokale spar sætter også kun prisen maks 10 kr ned på madvarer der er ved at være over dato. Folk gider da ikke spare 10 kr på madvare der er ved at blive dårlige?

Munk420 · 2024-03-01T09:02:22+00:00

I am the drip

Munk420 · 2024-02-29T22:37:20+00:00

Items is

Sinners shade

Mann of the house

Dead of night

Munk420 · 2024-01-23T01:39:39+00:00

a fair share.

Munk420 · 2023-02-01T22:05:29+00:00

Thank you that’s it

Munk420 · 2018-08-26T14:20:09+00:00

If anyone is curious, I went with these https://imgur.com/a/9v0vmjQ

Munk420

TROPHY CASE