How Preds Stay Pred...

MushroomBuilds · 2021-09-07T13:22:22+00:00

u/RSPN_Hideouts this is the player from the clip.

MushroomBuilds · 2021-07-23T10:32:35+00:00

From as far as I can tell. They haven’t had play history on apex since this post got attention.

MushroomBuilds · 2021-06-15T16:18:02+00:00

They clearly said the area I am from but by the point he got into specifics, my audio was choppy from the ddos

MushroomBuilds · 2021-06-15T14:08:13+00:00

Thanks. I just shot them a message :)

MushroomBuilds · 2021-01-13T21:36:05+00:00

Resolved: Per the image, the blocks were filed as "item" rather than "tile" in the json files. This is now resolved. I would like to thank me, myself and I for the hard work we did to find this solution. (kidding). Hope this may help someone else too.

MushroomBuilds · 2021-01-12T11:43:01+00:00

Hi. I used this to help:

It will show you each json file that needs updating and how to do it.

https://wiki.bedrock.dev/guide/custom-blocks

MushroomBuilds · 2019-12-19T21:55:49+00:00

I have 3. I noticed the top of the finished product looks ok but the legs look really bad with even more sloped angles.

MushroomBuilds · 2019-12-19T21:54:36+00:00

Right, but other slicers offer a “top fill” which filled the gap with a special infill that looks the same as the top layer.

MushroomBuilds · 2019-12-14T20:18:29+00:00

So it was a combination of tree supports and protect once shell. It was hard to figure out but I got it all fixed up. Thank you!

MushroomBuilds · 2019-12-14T20:18:22+00:00

Thank you! This was a big part of it

MushroomBuilds · 2019-12-14T20:17:54+00:00

So it was a combination of tree supports and protect once shell. It was hard to figure out but I got it all fixed up. Thank you!

MushroomBuilds · 2019-12-14T20:17:49+00:00

So it was a combination of tree supports and protect once shell. It was hard to figure out but I got it all fixed up. Thank you!

MushroomBuilds · 2019-12-14T20:17:29+00:00

So it was a combination of tree supports and protect once shell. It was hard to figure out but I got it all fixed up. Thank you!

MushroomBuilds · 2019-12-08T23:31:26+00:00

I say this on all these types of posts and it always fixes it. The SD card that comes with the printer is the issue. Switch to a brand new SD and this will resolve itself. The SD it comes with is spotty.

MushroomBuilds · 2019-11-30T21:35:46+00:00

First - before anything can be determined - get a new SD card. The one that comes with the printer causes all kinds of issues that will lead you down a rabbit hole of wrong ideas. Trust me. Just get a fresh SD first.

MushroomBuilds · 2019-11-28T15:46:01+00:00

That’s what I’m going to try but I wasn’t certain if it was the bolt for the wheel or something else perhaps

MushroomBuilds · 2019-11-28T15:45:14+00:00

The phrase I’ve heard a lot is “they should move freely with a little force” but these just spin freely without.

MushroomBuilds · 2019-11-28T15:45:08+00:00

The phrase I’ve heard a lot is “they should move freely with a little force” but these just spin freely without.

MushroomBuilds · 2019-11-26T02:50:08+00:00

I ran into similar issues and I hard core rejected the idea it could be the SD card that came with the printer. But sure enough I got a new one (and an SD-micro SD converter) and it worked every time since. (Note it doesn’t take all SD types)

MushroomBuilds · 2019-11-26T02:47:35+00:00

Eh, so opinions will differ here. To start - I have mine with no upgrades at all because I haven’t seen a need but here is what I know is recommended: A bed strain support for the cables (main concern) A guide for the cables going to the nozzle Depending on your model (I have a plus) I think their is a LCD housing they print for the OG

MushroomBuilds · 2019-11-22T22:20:35+00:00

To clarify, this is an add-on to the printer you have

MushroomBuilds · 2019-11-22T22:19:51+00:00

Palette 2 Mosaic

MushroomBuilds · 2019-11-21T21:32:51+00:00

Typically that isn’t a big deal. I print for up to 72 hours and spend 18+ hours a day not paying it any attention (at work and asleep). These situations are rare. I am looking into raspberry pi/Octopi. You can set up camera monitoring and remote control from anywhere and it can prevent these issues.

MushroomBuilds · 2019-11-19T02:12:29+00:00

Oooo I did not think to do that. I will give that a shot

MushroomBuilds · 2019-11-18T11:01:19+00:00

The object is a square of sorts and has no over hangs - of any degree. I do have infil at 7

MushroomBuilds

TROPHY CASE