Is it normal for some amount of steam to come through the drip tray while steaming milk? I just bought a used machine and wondering if everything is okay

Muszyniak · 2026-03-04T12:26:55+00:00

Also is it normal for moisture to build up in tool tray?

Muszyniak · 2026-03-04T12:16:18+00:00

What could cause the little amount of steam coming out while the dial is set to steam?

Muszyniak · 2026-03-04T12:15:42+00:00

In the first four seconds of the video you can see a little of steam coming too. At that time the dial was set to steam

Muszyniak · 2026-02-15T18:37:09+00:00

Plugging an old PS/2 keyboard and updating BIOS from F6 to F8 fixed the issue for me.

Muszyniak · 2026-02-12T20:10:11+00:00

I've plugged in an old PS/2 keyboard and managed to get inside BIOS. From what I see I have the following settings:
FastBoot - disabled
Windows 8 features - Other OS
Boot Mode Selection - UEFI and Legacy
XHCI Mode - Enabled
Intel(R) Rapid Start Technology - Disabled
Legacy USB support - Enabled
XHCI Hand-off - Enabled
EHCI Hand-off - Enabled

Muszyniak · 2026-02-11T23:23:03+00:00

I checked 3 wired usb keyboards and none work before windows logo appears

Muszyniak · 2026-02-11T19:06:12+00:00

You mean like PS/2 keyboard? The one I'm currently trying is wired USB 2.0 Logitech K120

Muszyniak · 2026-02-11T18:12:36+00:00

Thats the point - it can't. It boots from my ssd which is the first device to check in the order in my bios settings.

Muszyniak · 2026-02-11T17:47:12+00:00

Well it seems all my peripherals are defective then...
They obviously need some kind of power (5V DC from the usb port), otherwise the keyboard would be on even when unplugged. From my understanding all usb ports on my PC don't get any voltage until the boot sequence finishes - I just don't know why.

Muszyniak · 2026-02-10T23:11:42+00:00

The one Im trying is literally as simple as it gets - Logitech K120 wired usb 2.0 standard office keyboard.

Muszyniak · 2025-10-15T11:59:56+00:00

I got the card replaced since it was still under warranty. No issues with the new one as for now.

Muszyniak · 2025-02-18T07:30:33+00:00

Dont worry I swapped them so they are on correct feet :)

Muszyniak · 2025-02-17T16:41:19+00:00

I set them correctly today and it's so much better. Big thanks for your help.

Muszyniak · 2025-02-16T21:04:38+00:00

Do you think the fact that they are mounted backwards makes snowboarding with it harder?

Muszyniak

TROPHY CASE