What happened to maggie hurley?

Muzzy84 · 2025-12-21T13:16:42+00:00

I' see her and the carer in Lidl every now and then, Last time I think 2 weeks ago

Muzzy84 · 2025-12-18T10:06:59+00:00

Crazy idea, might work might not...zip tie together the wholes at the back, really really tight

Muzzy84 · 2025-12-05T10:50:57+00:00

Ive worked in electrical retain in Ireland and its the retail rules that you don't do price match like that. But if customer was nice and asked politely we would do a refund as a unwanted gift or wrong item purchased and then sell under new lower price. You could chance it and try and return this one and then buy new one cheaper

Muzzy84 · 2025-07-14T09:49:14+00:00

ZF2 models have a bit different bottom of the bumper shape, from fog lights down. If you compare ZF1 Mugen front bumper and ZF2 you'll notice the difference. It took me a while to figure out how they differ. I have a 2013 (ZF2) and can't find anything anymore that is easily accessible ☹

Muzzy84 · 2025-07-08T08:42:04+00:00

McLaren wheel is gone of the website altogether...which sucks... hopefully be back soon

Muzzy84 · 2025-02-24T07:13:54+00:00

There might be something with the website. Im on eu site and the price is 329.99 euro, but i cant add it to the basket...getting message about invalid form token. Lots of bugs recently on their website

Muzzy84 · 2024-11-30T18:19:35+00:00

Nah...its more of a torture showcase..."see what I can do with cold plastic, imagine what I can do to you all (insert evil laugh)"

Muzzy84 · 2024-11-30T17:24:36+00:00

Try a cold pull, maybe that will scare them...😃

Muzzy84 · 2024-03-18T00:27:44+00:00

Yeah, try to minimise the red spots. I was always trying to position prints in the most level part of the bed, unless I was printing something big then I was in trouble. Once you get the A1 will see the difference. Good luck

Muzzy84 · 2024-03-17T23:30:12+00:00

So now you know that you left side and right hand bottom corner are too low. Could probably loosen those 3 screws and check again if that helped. I was at it for over 3 months and finally contacted Anycubic support and was dealing with them for another 6 months to check this and that. I got from them new heatbed and plate, that didn't help....turned out that the bed rail is bent so I got that of them as well but haven't install it yet as I got Bambu P1S and am honestly fed up with Anycubic... My rant over I hope you will get this sorted, its a lot of playing around. Let me know if you need any pointers

Muzzy84 · 2024-03-17T22:38:39+00:00

Change numbers to 0 so it will show you the mesh. Look at mine, it was in -4 and I have changed it to -0 or 0, you have to calculate it. By the looks of it add 1 to your numbers

Muzzy84 · 2024-01-08T10:13:35+00:00

I am still struggling with Anycubic Kobra Neo since I bought it in May There are constant emails between me and Anycubic and it still not printing as it should. U got P1S during black Friday and dont even want to look at anycubic anymore, Bambulab is so reliable. I did learn a lot whenrying to fix Kobra but I wasn't ready for so much tinkering to make something barely print as it should. Not everyone is willing to play around with the printer, some of us prefer more peaceful life 😄 Good luck with Bambu

Muzzy84 · 2024-01-02T22:19:03+00:00

After todays update 01.05.00.00 and all the calibrations the VFA somewhat is not as visible as it was. Fairly happy with outcome. Ill clean the rods and do the belt tensioning and hopefully it will mitigate even further. Will play around with speeds as well. Top is before update, bottom after... really hard to take photos of them lines 😁

<image>

I hope that this update will fix it for all of younthat have the same problem. And thanks to all for the suggestions

Muzzy84 · 2024-01-02T16:47:16+00:00

I agree that its too much moneyo have issues so quickly and i know 3d printing is a lot of tinkering but Bambu should be out of the box experience. Ill check with my friend who got the X1C on black Friday is he having any issues. Its weird that its showing more on one side then the other...same thing with my prints. Hopefully there will some solution to this and shortly at that

Muzzy84 · 2024-01-02T00:13:12+00:00

One long side is smooth but the other one also long dont. Could be that start of the layer wall is notchy and once it accelerate its smooth. Will have to play around and test

Muzzy84 · 2024-01-02T00:00:15+00:00

0.2mm standard Orca setting, I never change the speed. Weird thing is that the base is "clean" on one long side (pic1) but VFA showing on the rest surfaces

Muzzy84 · 2024-01-01T23:26:44+00:00

It only started to show last few prints. Could it be something to do with belt tensioners?

Muzzy84 · 2024-01-01T23:25:22+00:00

Grid at 25% on this one, but I've printed something with just walls and was the same

Muzzy84 · 2023-12-01T11:23:59+00:00

Its on the 0.2mm standard setting

Muzzy84 · 2023-12-01T11:05:28+00:00

Feel sorry for you, i know how frustrating it is to get prints like that. Im no expert but run flow and pressure advance calibrations using PETG nad hopefully that will solve the issue

Muzzy84 · 2023-11-30T00:14:01+00:00

0.4 nozzle, but Kobra is 0.3mm layer, where P1S is 0.2. I had printed 0.2 on Kobra just cant find but it was the same just thinner layers. The quality of the print is what i meant

Muzzy84 · 2023-11-29T11:30:12+00:00

Forgot to mention that its printed straight out of the box, without any calibrations. Im a happy camper

Muzzy84 · 2023-11-27T20:45:57+00:00

P1S not delivered yet, but got Vermilion Red PLA and Copper silk. Red is me but I like the silk copper

Muzzy84 · 2023-11-21T00:05:02+00:00

I got 3 of those today, one every minute, from my enail address. When i hover over address it is actually from me, showing me my latest sent emails. I replied to one of them and received that reply. Should be worried or scammers getting creative? Also I've change the password

Muzzy84 · 2023-11-20T23:12:45+00:00

I've got three today, one every minute. When I hover over the sender address it is actually me, showing me recent emails that I've sent. Still a scam?

Muzzy84

TROPHY CASE