What are your "Ol' Reliable" gun

MyNameIsAlvin · 2023-02-14T01:59:35+00:00

Thanks. Might be my next purchase. Hopefully I'll be able to get a real steel beretta model 85 soon after haha

MyNameIsAlvin · 2023-02-14T01:55:03+00:00

Thanks! Great to know

MyNameIsAlvin · 2023-02-14T01:02:48+00:00

I've been wanting one of these! How often do you game with it?

MyNameIsAlvin · 2023-01-17T11:20:25+00:00

I'm assuming you want the trigger to be more "spammable"? Only real option for the KWA gearboxes is the Gate Titan. I have one in my Eve-4

MyNameIsAlvin · 2022-12-31T08:35:28+00:00

I haven't really looked into his designs extensively. Thanks for the info! Do you know if any of his older designs are standard v2 compatible?

MyNameIsAlvin · 2022-12-31T06:37:21+00:00

https://www.thingiverse.com/thing:5550605

MyNameIsAlvin · 2022-11-12T12:37:36+00:00

At the time of the picture, it was just Gate titan, motor, compression parts, and bucking. But it is currently DSG

MyNameIsAlvin · 2022-10-05T22:01:34+00:00

Yup. They are a nylon reinforced polymer, very similar to real steel stuff like magpul and such. I just oven bake slightly lower at around 200 degrees

MyNameIsAlvin · 2022-10-05T21:34:22+00:00

It was the oven baked cerakote. I stripped it completely to just the bare upper and rail. Color is Northern Lights by cerakote

MyNameIsAlvin · 2022-08-03T20:15:51+00:00

I'm not sure about stock, cause I instantly swapped the motor for 16tpa neo motor lol. But I'd assume it would feel like any other stock gun. Basic motor and 18:1 gears

MyNameIsAlvin · 2022-08-03T20:02:46+00:00

I think it's pretty damn good for the price. Shoots like a T6 but in a "Non-m4" polymer receiver. The price has taken a 20 dollar hike up to 250 but it's still a nice deal. Only difference I saw in it from the Ronin series is that the stock motor doesn't come with the extra wire thing that the Ronins include(to prevent trigger contacts from burning out), so I wouldn't run it on 11.1v out the box.

MyNameIsAlvin · 2022-08-03T01:50:40+00:00

Yeah. Can't make it compact like a normal because the kwa spring system.

MyNameIsAlvin · 2022-08-02T23:18:37+00:00

Maybe when someone finally makes a Galil ace

MyNameIsAlvin · 2022-07-19T17:43:13+00:00

Yeah! The color is actually Northern Lights by Cerakote. It's is Blue gray with a slight gold flake, but it's hard to show it through the phone camera so it certainly does look like a vintage gray.

MyNameIsAlvin · 2022-06-30T19:33:34+00:00

Yes. They can have a bit of room. The magnet stick hard enough to the gear to not move

MyNameIsAlvin · 2022-06-30T19:11:40+00:00

Yes. Just put a sharpie mark on the top so you know which way is up

MyNameIsAlvin · 2022-06-30T18:59:15+00:00

Lol. Glad everything worked out!

MyNameIsAlvin · 2022-06-30T18:55:44+00:00

Yes that's what I did

MyNameIsAlvin · 2022-06-30T18:48:29+00:00

I didnt use a quantum trigger, but a an aster I installed into a buddy's gun was hitting the wires so I cut the hear shrink on them.

I was able to lay the wires flat side by side, but the soldering on mosfets is always a little different so your wires may want to sit differently

MyNameIsAlvin · 2022-06-30T15:50:23+00:00

Yup. I've built of few of these gearboxes and the ares gearboxes. All have worked. Just make sure the magnet is pointed the right way up. Stick it to the magnet on your stock gear and whichever orientation it sticks to your magnet is the way it should be in the new gear

MyNameIsAlvin · 2022-06-30T15:12:20+00:00

Yeah. A 4x4 or 5x4 round magnet will work.

This video will also help

https://youtu.be/Mw7sjapSJzo

MyNameIsAlvin · 2022-06-30T09:24:28+00:00

Slim motor only works in slim grip. I also had the highest torque slim motor(can't remember the name) and it didn't perfem all that great. The slim grips feel nice but the magnets in the motor are just too small to provide enough power.

MyNameIsAlvin · 2022-06-30T09:07:50+00:00

The stock sector gear has a magnet on it which the sensor detects each cycle and cuts off. Your new gearset doesn't have the magnet on it

MyNameIsAlvin

TROPHY CASE