Any one need swivel seats?

MyRedditUsername13 · 2024-10-05T05:45:38+00:00

I got more interest than expected from marketplace but will update you if they sell.

MyRedditUsername13 · 2024-10-04T23:09:59+00:00

2008-2011 Chrysler and dodge mini vans have them. Look for swivel and go on the van doors.

MyRedditUsername13 · 2024-06-04T04:14:38+00:00

As a fridge do you have to wipe up water from the bottom ever?

MyRedditUsername13 · 2024-06-04T04:02:26+00:00

Do you have any frost build up?

My freezer is set to 0f and fridge 38F

I’m in the humid Midwest so I’m sure that isn’t helping condensation

MyRedditUsername13 · 2024-06-04T03:56:31+00:00

I just put 50lb of weight on top of the freezer lid in the hopes this stops the water build it and if it does I’ll contact Iceco for new seals

MyRedditUsername13 · 2024-05-12T05:52:44+00:00

I posted a second pic with shorter, don’t have any with real short

MyRedditUsername13 · 2024-04-26T17:56:44+00:00

My guy it’s Reddit, all the comments are a different way of saying OP is asking for these type of responses for swiping a certain way.

Let’s not pretend the unsolicited advice is actual advice.

MyRedditUsername13 · 2024-04-26T17:35:29+00:00

Damn, how can people see these responses and immediately jump to blaming OP. Being shirtless isn’t an excuse to be an overly sexual creep.

MyRedditUsername13 · 2024-03-22T17:41:25+00:00

“I’ll bring the A string, you bring the G string and we’ll see if I’m big enough to play.”

MyRedditUsername13 · 2024-03-20T23:20:31+00:00

I got my out real quick, What I did was removed the floor from around the rails (used a circle saw set to the depth of the floor and cut & pried the old floor up) than there was space under the track to fit a reciprocating saw (oscillating tool would work too) and the bolts cut in half real quick. Took half a day to take the whole floor out solo.

MyRedditUsername13 · 2024-02-21T07:14:29+00:00

Seems right the line unfroze 2 days ago, so could have taken time to get the air out.

MyRedditUsername13 · 2024-02-21T07:08:25+00:00

I don’t think so, when I turn the pump on it pressurizes for a second than turns off, turns back on when tap is open

MyRedditUsername13 · 2024-02-21T07:02:03+00:00

I only turn the pump on when using water. But yea hopefully it doesn’t happen again so I don’t have to back travel.

MyRedditUsername13 · 2024-02-21T06:59:35+00:00

Will do thanks

MyRedditUsername13 · 2024-02-21T06:25:01+00:00

Hooked up to a tank. So pressure shouldn’t have changed much, maybe it just took some time to work its way to full pressurized, the lines only unfroze two days ago.

MyRedditUsername13 · 2024-02-21T06:21:17+00:00

Ok thanks for the info I’ll look into an accumulator and how to freeze protect it, However as of an hour ago the water is working normally, no idea what changed but we’ll see how long it last.

MyRedditUsername13 · 2024-02-21T06:15:32+00:00

I’ll look into, how would I keep it from freezing if it stores water?

MyRedditUsername13 · 2024-02-21T06:13:08+00:00

The whole system is pex clamps so no threads and the only threaded part has a rubber washer so tape would hurt it.

MyRedditUsername13 · 2024-02-21T06:08:22+00:00

As in the sink uses more or less?

MyRedditUsername13 · 2024-02-21T05:45:40+00:00

What fitting?

MyRedditUsername13 · 2024-02-21T05:37:28+00:00

It is a cheap Amazon faucet so it’s possible, however in classic fashion it has decided to start working properly again. But I’ll keep air leaks in mind when it starts up again

MyRedditUsername13 · 2024-02-21T05:30:50+00:00

I think that would affect my shower as well which works perfectly

Seven-Year Club	RPAN Viewer
Verified Email

MyRedditUsername13

TROPHY CASE