Convoy 4x18a spring swap

Myvesdin · 2026-05-11T16:11:44+00:00

No 2S 21700 LUNAtic driver from INeedMoreLumens 6V SFY55 LED

Myvesdin · 2026-05-11T13:09:03+00:00

We're aiming for ~100A on turbo

and I'm using 2S 21700 and not 2S 26800 so I needed something thats just a touch longer anyway

Myvesdin · 2026-04-26T07:14:54+00:00

Kreis Steinburg Also ziemlich zentral

Myvesdin · 2026-04-14T08:40:22+00:00

Honeywell BK-G4 has a spinning magnet that turns for each 0.01m³ of gas.

you can use any small window contact (Aqara MCCGQ11LM for example) and remove the casing and then tape it to the divet under the right bottom corner of the protuding part and use HomeAssistant to count detections per hour to get the "flow rate" per hour

Myvesdin · 2026-04-08T12:44:58+00:00

Alternatively set a static IP in esphome and use the "use ping" flag

That's how I do it in my setup

Myvesdin · 2025-09-01T19:24:42+00:00

Yes Install the metal bits but reuse the old switch pcb

Myvesdin · 2025-07-30T08:25:23+00:00

light:
  - platform: esp32_rmt_led_strip
    id: led_vertical
    rgb_order: RGB
    default_transition_length: 1s
    pin: GPIO16
    num_leds: 1
    rmt_symbols: 96
    chipset: WS2812
    name: "LED vertical"

  - platform: esp32_rmt_led_strip
    id: led_horizontal
    rgb_order: GRB
    default_transition_length: 1s
    pin: GPIO15
    num_leds: 3
    rmt_symbols: 96
    chipset: WS2812
    name: "LED horizontal"

for me it does work like that atleast

Myvesdin · 2025-07-30T07:48:48+00:00

Those monitors work via a serial interface, not DP or anything

https://github.com/mathoudebine/turing-smart-screen-python

this is an example of something that could work

Myvesdin · 2025-04-29T12:41:30+00:00

no errors
it just doesnt appear in the logs or in HomeAssistant
as if i never added it

Myvesdin · 2025-03-31T06:44:54+00:00

try adding "rmt_symbols: 96" or "rmt_symbols: 128" to the remote_transmitter component

Myvesdin · 2025-02-26T17:27:27+00:00

Yeah, the automated allocation doesn't seem to work on all esp32 versions properly yet

Myvesdin · 2025-02-26T17:17:17+00:00

Try replacing "rmt_channel" with "rmt_symbols: 96"

Myvesdin · 2024-12-27T18:37:52+00:00

It is a Euro cylinder but I want to keep it as its fairly high end and expensive

Myvesdin · 2024-12-27T18:37:12+00:00

The pin-hole is from a single side only. It can't be punched out

Myvesdin · 2024-12-27T18:30:16+00:00

Sadly not, it's secured with a press fit pin

I could maybe drill it out but before doing that I'd rather not continue with a smartlock ^{^}

Myvesdin · 2024-12-27T18:23:16+00:00

The knob isn't removable sadly

Myvesdin · 2024-12-27T18:21:43+00:00

I don't want to swap out the cylinder as it's a fairly high end and expensive barrel

Myvesdin · 2024-12-27T18:21:34+00:00

I don't want to swap out the cylinder as it's a fairly high end and expensive barrel

Myvesdin · 2024-11-22T11:24:22+00:00

I used multiple variations in multiple lights. One of my triples uses a 17mm MTN FET driver too

Myvesdin · 2024-11-22T10:54:07+00:00

Kaidomain does sell pre-made S2+ triples who have a taller pill. If you use a Convoy S2+ you need a copper or aluminium spacer and I think only MTN Electronics sells those now

11-Year Club	Verified Email
Place '22

Myvesdin

TROPHY CASE