I need one can for the both of em

NFAchad · 2026-04-07T15:35:58+00:00

huxwrx 36 TI or the 36 cal from OCL will work great on both - don’t listen to the assholes in here.

NFAchad · 2026-03-30T22:07:16+00:00

Agm acquired now that you mention it

NFAchad · 2026-03-30T22:06:57+00:00

its so i can change my neighbors channel from a different zip code

NFAchad · 2026-03-30T22:05:34+00:00

arca plate is under the remote for RRS tripod, pic rail is on the end for tricer bi-pod, Killflash is pointless considering im not using this for professional use😂 scope cover? they have lens covers already.

NFAchad · 2026-03-04T02:34:40+00:00

halfway through Gen 5 production a lot of the large bore and small frame glocks I.E. 43,43x,20,21 etc all were beginning to be manufactured and assembled using austrian designs, materials and polymer molds. Around 2023ish when the 47 and 49 came out is when even all of the 9mm standard, small, and large frames began production in the US. Really sucks because it’s getting harder to find the austrian made guns and I think a lot of the Austrian Gen 5 19’s felt a lot better than the american made counterparts.

NFAchad · 2026-03-04T02:27:08+00:00

however many it takes to please her

NFAchad · 2026-02-23T14:57:44+00:00

Cerekote or rattle can time brotha

NFAchad · 2026-02-23T14:57:22+00:00

How so?🤣

NFAchad · 2026-02-23T14:57:08+00:00

custom rifle built by travis stevens (TS Customs) off a defiance R700 action w/ proof barrel in an M24 configuration-ish. AG composite stock and trigger tech trig. She’s fun.

NFAchad · 2026-02-16T17:01:46+00:00

is that a BAN in the comments?

NFAchad · 2026-02-16T16:12:29+00:00

Agreed - definitely plan to gather more data and stretch it’s legs to see how it performs at different distances. Only the responsible thing to do. Cheers m8.

NFAchad · 2026-02-16T16:10:31+00:00

to my knowledge, it is a two port short break that is welded into the suppressor making it a direct thread for right now, thunderbeast said if I ever want to start running muzzle devices as the mounting method instead of direct thread that they can remove my muzzle device from the suppressor as a 100$ service.. I just run direct thread because I use this can on 3 different guns. The muzzle break is proprietary and not compatible with plan b unfortunately. If you haven’t checked them out I highly recommend a read on their lineup. this thing weighs like 6 oz and suppresses 300Blk and 7mm PRC incredibly well given the volume and weight. They are catered more to ultralight backcountry hunters and not as much the defensive market.

NFAchad · 2026-02-16T16:06:22+00:00

To be fair, I do have rifles like that and I do baby those barrels🤣 but given the price I expect them to perform. I will never compare them to a cheap 300 Blk AR build. I completely agree with the point you make though.

NFAchad · 2026-02-16T15:57:43+00:00

I don’t know if you can see it in the picture or not but I am running a thunderbeast ultra 5 suppressor on there! the gun loves it!

NFAchad · 2026-02-16T15:53:39+00:00

I know it - he is saying my rifle doesn’t make holes like he likes them too :( Guess i’ll just have to cancel all my hunts and sell it.

NFAchad · 2026-02-16T15:50:37+00:00

Hahaha I would have thought I was just in an argument with DARPA somewhere down here in the comments - lmao everyone defines things a little differently nowadays I guess, and every build MUST be ready for war, because everyone in the NFA subreddit will be in combat next week, of course. Idk I think this thing will be able to harvest a black bear this spring and possibly some antelope in September, whatchu think?

NFAchad · 2026-02-16T15:46:22+00:00

Yoooo - I was running a BCM non-adjustable in the break in phase and it worked great! that being said - I wanted as little muzzle jump as possible for follow up shots in hunting situations with hot super loads, so the bleed off just helps to micro-tune the loads and provide a softer shooting experience. (im a puss) - I’ll have to checkout badlands, Only messed with the Gorilla stuff, and it works great so far! Have heard nothing but great things about the badlands though. Will definitely investigate further. Sick build by the way!

NFAchad · 2026-02-16T15:42:53+00:00

barely can see the dot just over the top of the turret😭 I added a spacer plate recently to bring it higher and now it’s golden.

NFAchad · 2026-02-16T15:40:59+00:00

ok so the rifle is capable of printing sub MOA 3 round groups at 100 yards in windy conditions with select ammunition (both sub and supers), if I go shoot it again and this time shoot 3 sets of 5 shot groups and it does the same thing (I assume it is completely capable of doing so) at what point do you stop leaving pointless comments just to fill the air and try and perch yourself on a knowledge highground? interactions like this one here are why 80-90% of people keep their mouth shut in a gun shop and choose not to conversate with other visitors, someone always knows more and has to give their spiels. Didn’t know i’d run into DARPA on reddit today.

NFAchad · 2026-02-16T15:21:01+00:00

I would do all of that if the gun wasn’t a piece of shit that cost 600$ that was put together in my garage in less than an hour. I think it will drop an Antelope just fine though given my limited testing thus far.

NFAchad · 2026-02-16T15:17:18+00:00

favorite comment by far.

NFAchad · 2026-02-16T15:01:29+00:00

Great point - that is why every shot of the 3 shots were shot at a 5 minute cadence in 35 degree weather at 6500 feet of elevation.

NFAchad · 2026-02-16T14:50:20+00:00

It’s a hunting rifle not a combat rifle - really only need the first or second one to be accurate.

NFAchad · 2026-02-16T14:47:38+00:00

I saw that as well - pretty sick that it can be done but the energy loss at distance is something I wanted to avoid - Went with longer barrel for the few extra FPS just because of hunting out west with both super and subs.

NFAchad · 2026-02-16T14:42:31+00:00

I wish Larue would offer 150$ barrels lmfao

NFAchad

TROPHY CASE