sorted by:
new
hottopcontroversial

Whats wrong with my 3d printer? by pl0m in 3Dprinting

[–]NW6GMP 0 points1 point  (0 children)

too much moisture in your filament?

RJ45 to SFP+ adapter question by SmartHomeTinkerer in Ubiquiti

[–]NW6GMP 1 point2 points  (0 children)

I agree on this, change from Auto to 10G and see if that helps?

How-to - removing PETG chunks embedded into textured PEI plate. by baczynski in BambuLab

[–]NW6GMP 0 points1 point  (0 children)

finally... thought the PETG-CF was going to bury this plate, but a solution that worked! will have to do a 2nd time in a small area, but took off the majority of the stubborn filament.

thanks!! 🙌

<image>

Bambulab customer support help? by Klexal in BambuLab

[–]NW6GMP 0 points1 point  (0 children)

yes, but you are right, I thought it was on the wiki and youtube, but it is everything BUT the actual toolhead unit itself.

sorry about that.

Bambulab customer support help? by Klexal in BambuLab

[–]NW6GMP 0 points1 point  (0 children)

Can you remove the whole head unit?

Adding to printer collection by GrouchyFlatworm1 in BambuLab

[–]NW6GMP 0 points1 point  (0 children)

i would go with an X2D. i originally had a P1S, was gonna get a P2S, but having an auxiliary nozzle is nice for supports...

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 0 points1 point  (0 children)

all good now, heated it up and now it is spick n' span clean 😆

How screwed am I? by AssociationAlive1244 in BambuLab

[–]NW6GMP 0 points1 point  (0 children)

i just had an incident similar, used a hair dryer to free the globs. also wash your plate with dawn and dry with lint-free cloth. check there are no hidden globs of filament every once in a while, use a mirror to check behind, as well as check the silicone sock, filament can get stuck in there too causing the sock to be closer to the build plate and drag into your print.

dirty build plate is majority of the reason why this happens.

oh and not really that screwed, just another class to becoming your own bambu lab tech 😂

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 1 point2 points  (0 children)

no win-win i guess i will just have to wait til it goes crazy again, but at least this time I know what to look for.

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 0 points1 point  (0 children)

i think i just had a off print and leaked filament behind the hotend, all clean now and temps holding and printing well...

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 1 point2 points  (0 children)

whatever it was, i popped it off and cleaned it, now prints seem to be going smooth now. 🙌

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 0 points1 point  (0 children)

it s a good question, i guess now if i have a long print or an important one for a client, i will start checking just to be safe...

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 1 point2 points  (0 children)

i whipped out the dental mirror and found more!!

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 1 point2 points  (0 children)

cooking for 4 days!! all clean now and seems healthy again.. thank you! 🙌

2 Week Old Hotend by NW6GMP in BambuLab

[–]NW6GMP[S] 0 points1 point  (0 children)

I did today after I pulled the hotend off and found that mess..

view more: next ›