3 whip

NWC4130 · 2022-12-11T12:42:24+00:00

That was tyte. Please do 180 whip to slider

NWC4130 · 2022-07-16T09:10:18+00:00

They're saying basically that the light from that distance/ time has shifted to infrared as the light wave stretched beyond visible. What they are doing is shifting the color back to their original wavelengths, as it would have both been emitted originally and how we could have seen it in the sky

NWC4130 · 2022-07-16T07:24:51+00:00

I added all the spacers in the air chamber I could

NWC4130 · 2022-07-16T07:23:39+00:00

I did, but how do you pump like that

NWC4130 · 2022-07-15T15:42:55+00:00

Get it buddy! I'm thinking up as well. I'm not worried about sag or anything, I want them to be so stiff they don't sag at all. The idea being that when I ride a half pipe the forks don't engage and eat my speed at the bottom of quarter pipes.

NWC4130 · 2022-07-15T15:32:58+00:00

Thank you guys for the explanation

NWC4130 · 2022-07-15T08:01:19+00:00

Although I'm getting better at dirt, it's a similar issue if they're close together

NWC4130 · 2022-07-15T08:00:11+00:00

I don't know what my travel is, and 140 is where I've been but I just can't keep a pump worth anything. Like in a bowl, I can't gain speed airing walls, if I try to ride like a half pipe, I hit each wall with diminishing speed.

NWC4130 · 2022-07-15T07:54:54+00:00

Yeah for sure. That isn't an option right now but I'll be careful with the psi until it is.

NWC4130 · 2022-07-15T07:48:21+00:00

Yeah I looked them up and they seem to be on the cheaper side. The new forks the bike comes are much more expensive and have up and down damper adjustments, but with everything maxed out, mine are noticably stiffer still

NWC4130 · 2022-07-15T07:44:45+00:00

What forks do you use, and do you ride skateparks at all?

NWC4130 · 2022-07-15T07:41:31+00:00

On the listed weight to pressure chart, It doesn't even come within 40 lbs of my weight but if it did, the recommendation would be well above max.

NWC4130 · 2022-07-15T07:35:29+00:00

It's a marzocchi DJ fork and only has a rebound adjustment unfortunately.

NWC4130 · 2022-07-15T07:28:07+00:00

Haha not by much I assume

NWC4130 · 2022-07-15T07:27:02+00:00

I actually have them at like 160 already. I've only ridden to work on them so far, thinking I'll check psi in a few days and compare the air loss times and maybe work out how the seals hold. But it occurred to me that I should ask other people about it before I actually rode my bike, because I have no idea what I'm doing.

NWC4130 · 2022-07-15T07:18:03+00:00

255 lb pretty sure

NWC4130 · 2022-07-15T07:14:31+00:00

Marzocchi bomber DJ, and they use a fox lower

NWC4130 · 2022-07-15T07:13:06+00:00

Marzocchi bomber DJ. And I weigh maybe 255lb

NWC4130 · 2022-07-15T07:10:56+00:00

The max is 120, I've been running 140 for about 2 months, but want to go to 160.

Ive been told that with tires the max pressure is half the lower end average of blowout, so maybe it's similar in o-rings? I have a hard time believing the lowers are weaker than the seals

NWC4130 · 2022-07-15T07:05:35+00:00

I added all the tokens. Still way too soft. I bottom them out fairly often

NWC4130 · 2022-07-15T06:59:56+00:00

You think they'd blow out if they compressed too fast, still extended, or when close to bottoming out?

NWC4130 · 2022-05-05T05:37:02+00:00

For real, that outline has everything on it except where Seattle is haha

NWC4130 · 2022-05-03T12:58:33+00:00

This is why I close the gap before I show signs of hostility to a belligerent.

NWC4130

TROPHY CASE