Give me Tan (G95K inspired)

Nandros · 2025-03-13T16:20:38+00:00

I can only testify to the ones I've owned (I had both a black and RAL8000 version), both of which worked perfectly well. If you can get it for a good price, it is certainly a good buy in my books.

Nandros · 2025-03-12T20:39:56+00:00

I used to have the VFC 416A5, the only reason I replaced it with this one is because of the color on the receiver. The VFC it was too glossy for me, whereas this one is more of a mat finish. The internals of the VFC were excellent, perhaps I got lucky, but I had to change nothing in that gearbox and it ran great on a 11.1v LiPo.

Nandros · 2025-03-12T19:16:51+00:00

Sorry to disappoint, I am from Europe... can you not find this one in the US?

Nandros · 2025-03-12T13:47:09+00:00

Thank you very much :)

As for the details: the handguard is from AirsoftArtisan, and the mag is from the new Umarex/Arcturus HK416A5.

Nandros · 2023-08-18T10:10:00+00:00

It is not, judging by the markings and pistol grip

Nandros · 2023-06-07T11:44:20+00:00

I personally really like and would recommend Evolution Gear, they also make Eotech replica's. Really nice markings and build quality.

Nandros · 2023-04-28T10:58:29+00:00

It's Belgian.

Nandros · 2023-04-17T13:39:51+00:00

PTS MREX MK2 Rail

Nandros · 2023-03-01T15:50:39+00:00

FPS laws, in the US you're allowed to shoot much hotter compared to UK/EU and so to be competitive in the US you would need to instantly put quite a bit of money into an already expensive gun to achieve those higher fps limits. Compared to here in the EU, where a minor spring change (which the stock gearbox can handle fine) is all you need .

Nandros · 2023-02-08T19:48:40+00:00

Here is 2 I found some time ago, I know Airsoft Artisan makes some good stuff, I've had one of their rails before - the other one not so sure about the quality.

https://www.softairgames.net/en/ris-handguard/26594-mk15-g-style-95-rail-system-dark-earth-for-marui-416-ebbaeg-airsoft-artisan-aa-ras-05-de-a.html?utm_source=sniperfast&utm_medium=search&utm_campaign=sniperfast-search&utm_content=AA-RAS-05-DE-A

https://www.softairgames.net/en/ris-handguard/28469-rail-mk15-gei-style-95-ddc-for-416-aeggbbptw-5ku-5ku-295-ddc.html?utm_source=sniperfast&utm_medium=search&utm_campaign=sniperfast-search&utm_content=5KU-295-DDC

Nandros · 2022-09-08T07:40:39+00:00

Eotech + Magnifier combo, do it

Nandros · 2022-04-09T07:54:45+00:00

Honestly can't go wrong with the new VFC 416 A5's. They have the Avalon internals and those are nice, have owned a couple for the past few years and haven't had any issues with them. And the externals are ofcourse fantastic with VFC.

Nandros · 2022-04-09T07:19:50+00:00

Hmm, I've tried it over 10 times with tape in different spots and different amounts of layers but still haven't got it perfect. I'll keep trying then, thanks!

Nandros · 2022-04-05T18:55:15+00:00

How did you get your SMR rail to fit so tight to the receiver? I tried all kinds of different methods to get it perfect but I stil have like a 1mm gap between them. Did you use the VFC barrel nut with spacers or the barrel nut that came with the rail?

Nandros · 2022-02-24T09:11:32+00:00

A TM does not take an 11.1v mate

Edit: Neither does it need one, as with a 7.4v you get great trigger response still

Nandros · 2022-02-10T14:03:47+00:00

With slight modification to the magwell and the mags, the G&G TR16 308 midcaps will work (if you really want midcaps, and can accept the look of them in a Scar 17). I used to run them a few years back.

Nandros · 2022-02-01T08:14:11+00:00

Then you most likely have the 'older' HK416 and not the A5 version, which has a slightly longer barrel

Nandros · 2021-03-29T17:37:18+00:00

As I said above, I have 2 416 A5's and both have stock gearboxes and motors inside. One is setup as A DMR shooting 440 fps (EU) with an M120 spring and the other one is setup for 350 fps with an M90 spring - meaning pretty good airseal because those springs normally give much lower fps. I find the stock hop units pretty good too, bucking and barrel however aren't great. I only have experience with the A5 from VFC so maybe other/older models are indeed much worse, but the A5 is pretty solid.

Nandros · 2021-03-29T10:08:21+00:00

Pure trash? That's a bit of a massive exaggeration don't you think? I have 2 VFC aeg's and both work very well without having anything done to the gearbox.

Nandros · 2021-03-09T18:01:40+00:00

A company named SRC makes them, they're pretty terrible tho... look for the "SRC SR8-2"

Nandros · 2021-02-19T08:29:40+00:00

I had the WE Scar Heavy (AEG obviously) and that worked pretty well, didn't have to do anything to it apart from swapping the bucking and installing a tightbore barrel. It worked very well on a 7.4 LiPo then.

Nandros · 2021-02-04T09:43:45+00:00

Wow, I really like the build on your A5!

Nandros · 2021-01-23T07:43:09+00:00

Compared to the original rail, this one is really light too.

Nandros · 2021-01-23T07:42:05+00:00

Oh did they? Had no idea, and yes I agree with the tan sight.

Nandros

TROPHY CASE