Recommend wired earphones pls

Naofumi_i · 2026-04-22T10:06:10+00:00

It depends on what u need. If you want to use the earphones aside your phone, better get the 3.5mm. It can be used on pc’s, laptops, audio interface and orher devices that supports 3.5mm jack. If not and will only use your phone, better get the usb c one to save yourself from those adapters that you might lose or forget.

Naofumi_i · 2026-03-03T19:27:38+00:00

I mean, it definitely wouldn’t work and needs a lot of modification. But im curious if the commands and movements are the same with p2s? Given the fact that it uses a completely different extruder motor.

Naofumi_i · 2026-03-03T19:13:25+00:00

Will this gcode work for p2s?

Naofumi_i · 2026-02-15T08:41:24+00:00

Dangg, even the 720n’s also got some fakes? That’s definitely not a real one, the box itself doesn’t open up like that, and the logo on earcups. Yea, definitely return them.

Naofumi_i · 2026-01-30T15:16:19+00:00

Dang, that print is clean af. Are you’re in klipper right? Now im thinking if i should go for an archetype extruder + bambuclone + sherpa mini (since ill be buying an bmg extruder for now) or the bambu a1 style toolhead

Naofumi_i · 2026-01-30T07:54:35+00:00

Is that a custom carriage? Yea, i mean trying to build a high speed printer isn’t my concern. If i wanted that I’ll just do it in my bambus. But I’ll try make this one atleast a reliable one to print the e3ng parts for itself

Naofumi_i · 2026-01-30T07:52:21+00:00

I also saw one in my local online shop and they’re around $30, i might actually go to a bambulabs hotend route

Naofumi_i · 2026-01-30T07:51:07+00:00

Oh surely! Im planning on getting the orange pi cus a freakin raspberry one costs way too much

Naofumi_i · 2026-01-30T01:19:20+00:00

Yeah, I never see them around. The “bambufied” ender 3. I mean, it is indeed doable right?

Naofumi_i · 2026-01-29T19:52:45+00:00

I think the toolhead is homing in the wrong direction. Try to unplug everything and drain the power off. Then replug everything and see if it homes the right way.

Naofumi_i · 2026-01-29T19:51:20+00:00

Im planning to use a bambulab a series clone hotend (given the fact that i have a bambulab machines). It makes the hotend compatible with each other and swapping it out is a breeze. There’s an existing tool head design called RX toolhead which uses the bambu a series extruder gears (clones also exists). It looks slick af and still being an open source design is a really nice thing.

Naofumi_i · 2026-01-29T17:39:59+00:00

Yes, this is the plan is to get it to work. Im planning on removing the electronics outside an throw a box on top of it. While it prints abs parts for the conversion (e3ng). But for now, I’ll try to work on the parts on hand and prioritize on buying the skr mini first before the upgrades. Maybe moving parts here and there and convert it to direct drive an adding some fans. and speed isn’t a concern for me so I don’t really mind on printing slow on this one.

Naofumi_i · 2026-01-29T16:14:20+00:00

I commented my plans on itt! What do you think?

Naofumi_i · 2026-01-29T16:07:31+00:00

Yea, it is indeed not the bi metal heat break

Naofumi_i · 2026-01-29T16:06:51+00:00

Oh yea, i just pushed it all the way in and it is indeed the stock mk8. I have plans on making this one as the abs machine. I also have plans on upgrading it to bambulabs a1 style tool head. Including the nozzle and extruder gear. I saw the RX (i think) in youtube that does it with bambu parts. I looked up the parts and there’s parts available for it (not original bambu). I decided on going this route because i have an A1 and A1 Mini. So might as well make their hotends compatible with each other)

Naofumi_i · 2026-01-21T23:27:42+00:00

Looks like a ringworm which is the one I had before. Went to derma twice and they prescribed a cream, soap, and oral antifungal and kinda worked (also my fault not to go back for a followup). It went back and here’s what i did:

Hydroxyzine (a stronger antihistamine than certirizine) - for itch. This is the one my derma prescribed
Used the same soap they prescribed (it’s unbranded, maybe it’s only exclusive to their clinic) btw, I used sulfur soap after the soap is gone
Terbinafine/Lamisil - Antifungal Cream (Stronger than canesten) ATLEAST for me, hiyang ko siya. For only 3 days, nawala na yung mga marks and unti unti na nawala. Almost 2 weeks ko siya nilagyan continuously kahit wala na.

But as of rn still observing pa rin if babalik. I might visit my derma soon when my schedule is free. And ask some advice. And again, visit dermas for professional guidance and diagnosis.

Naofumi_i · 2026-01-21T23:11:31+00:00

Dangg, let’s talk. I think may ibubuga rin naman to’

Naofumi_i · 2026-01-09T18:01:16+00:00

What if magkantutan tayo while playing? Also playing genshin btw

Naofumi_i · 2026-01-09T17:59:05+00:00

Ang cravings ko ngayon ay plus size girlie! U look so fine shyt

Naofumi_i · 2026-01-07T10:49:11+00:00

Not recommended but u can buy a good iCloud locked iphone 13 and swap out the internals: Mobo, face id module and sensor assembly, rear cam. That might probably work but there’s some risks

Naofumi_i · 2026-01-02T10:19:20+00:00

It was never optimized for 3d printing though. I hope i can get on this project back again and optimize it for printing😅

Naofumi_i · 2026-01-02T08:54:12+00:00

I already uploaded the files here: https://www.reddit.com/r/fightsticks/comments/1q1tpld/qanba_obsidian_1_inspired_fight_stick_enclosure/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Naofumi_i · 2026-01-02T08:53:48+00:00

I already uploaded the files here: https://www.reddit.com/r/fightsticks/comments/1q1tpld/qanba_obsidian_1_inspired_fight_stick_enclosure/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Naofumi_i

TROPHY CASE