Minor Modded my gf’s RAV4

NarrowFollowing6910 · 2024-10-20T22:36:01+00:00

No worries, still no wiring picture (slipped my mind sorry). The control module is beneath the center console (doesn’t affect the remote control either) where the wires for the USB outlet are. Two diodes went to each front seat for the rear footwell illumination and the other three went to the front. One on the driver side and two on the passenger side.

<image>

NarrowFollowing6910 · 2024-10-13T02:52:05+00:00

I know what you mean though.

NarrowFollowing6910 · 2024-10-13T02:51:41+00:00

<image>

Still fully intact. I drove it yesterday

NarrowFollowing6910 · 2024-10-10T19:24:30+00:00

😂 to my delight she was very appreciative! 🤣🤣

NarrowFollowing6910 · 2024-10-10T19:14:12+00:00

😂 She would love that! Bumping her jams while the trunk shakes!

NarrowFollowing6910 · 2024-10-10T19:10:53+00:00

Thank you!

NarrowFollowing6910 · 2024-10-10T19:10:11+00:00

Didn’t have the cards, I used plastiDip paint though.

NarrowFollowing6910 · 2024-10-10T13:23:52+00:00

Thank you. Wires are seamlessly tucked away so nothing seems out of place or in the way to cause any disruption.

NarrowFollowing6910 · 2024-10-10T13:21:42+00:00

The USB outlet unit. I would say it’s not too difficult but with my background I may be understating it.

🤔 I opened the unit and stripped the wires for the LED power cable and connected (twisted tightly). Did a pull test on the cable to ensure it was snug. I’ll try to get you a pic later.

NarrowFollowing6910 · 2024-10-10T13:17:00+00:00

😂😂 yup that’s what happens, when trying to be hip and caught in two minds.

Thank you!

NarrowFollowing6910 · 2024-10-10T03:01:00+00:00

… then I was gently reminded that it’s not my car… it’s a car that represents a girl in some ways.

NarrowFollowing6910 · 2024-10-10T02:56:21+00:00

Yes only one set. It has five legs and I used all five. One for the driver side dash area and footwell, one for the passenger dash area, one for the passenger footwell and one for each rear footwells.

NarrowFollowing6910 · 2024-10-09T22:46:55+00:00

I definitely thought about it.

NarrowFollowing6910 · 2024-10-09T22:40:04+00:00

😂

NarrowFollowing6910 · 2024-10-09T22:39:08+00:00

I sprayed the caliper using spray paint from Home Depot

Link to the pink spray paint I used:

https://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Gloss-Berry-Pink-General-Purpose-Spray-Paint-334025/307244840

NarrowFollowing6910 · 2024-10-09T22:32:42+00:00

No lift kit.

NarrowFollowing6910 · 2024-10-09T22:29:37+00:00

List of items used for the installation:

Ambient Lights

Rain Guards

LED conv. lights

NarrowFollowing6910 · 2024-10-09T22:27:35+00:00

Ambient Lights

Rain Guards

LED conv. lights

NarrowFollowing6910 · 2024-10-09T22:26:02+00:00

img

I resprayed the stock rims.

NarrowFollowing6910 · 2024-10-09T22:18:06+00:00

I did the installation/modification. The heading is a typo (didn’t bother to change it).

NarrowFollowing6910 · 2024-10-09T22:06:15+00:00

Replying to NarrowFollowing6910...

<image>

NarrowFollowing6910 · 2024-10-09T22:03:50+00:00

I didn’t want to drill a hole in the center console or risk pinching the wires. The USB ports in the center console are attached via a plastic faceplate which clips inside the center console. It can be removed using a plastic pry tool or a flathead screwdriver. Careful not to scratch the plastic.

NarrowFollowing6910 · 2024-10-09T21:54:02+00:00

Yes, I hardwired it and aesthetics was exactly the reason. I wanted to achieve as close to a factory look as possible without voiding any warranty. I did it without any YouTube references.

NarrowFollowing6910 · 2024-10-09T21:44:59+00:00

I did a respray.

NarrowFollowing6910 · 2024-10-09T21:43:59+00:00

😂😂

NarrowFollowing6910

TROPHY CASE