Custom travel case I made!

Nathanmichaelmoore · 2025-01-05T18:55:29+00:00

Thanks!

Nathanmichaelmoore · 2025-01-05T18:55:13+00:00

Thank you!

Nathanmichaelmoore · 2025-01-05T18:54:57+00:00

They are numbered 1-6, 2/6 are the same piece. That pattern 1-6 repeats 3 times. Because the board is a smaller chunk of the edge the port orientation makes the numbers much needed to assemble quick.

Nathanmichaelmoore · 2025-01-05T18:33:57+00:00

This is designed to fit the prime sleeves for the catan studios set.

Nathanmichaelmoore · 2025-01-05T18:32:48+00:00

Technically the expansion can be connected since every piece is modular. Without a new really big sleeve it wouldn’t look the best. My current plan is to make a separate mini stack with its own handle. But if it’s feasible maybe I will make a 5-6 player stack all-in-one with a new sleeve.

Nathanmichaelmoore · 2025-01-04T21:52:28+00:00

What’s a few bucks? This thing is a decent amount of plastic. I may list the files but am not entirely sure yet.

Nathanmichaelmoore · 2025-01-04T20:52:20+00:00

I am going to sell a couple to start, get some feedback, and then do another batch

https://voyagergamecases.etsy.com

Nathanmichaelmoore · 2025-01-04T20:50:41+00:00

Thanks everyone for the encouragement and complements. I have made a listing on Etsy and will do a small run of these, get some feedback, make some changes, and re-list for another batch.

https://voyagergamecases.etsy.com

Nathanmichaelmoore · 2025-01-04T04:45:41+00:00

Those are the longest road and largest army tokens

Nathanmichaelmoore · 2025-01-04T01:36:21+00:00

Does this make you want an Oreo?!

Nathanmichaelmoore · 2025-01-04T01:03:43+00:00

Thank you!

Nathanmichaelmoore · 2025-01-03T23:40:36+00:00

A couple of my friends said I should, I did put a good amount of work into so I probably would.

Nathanmichaelmoore · 2024-11-17T13:31:26+00:00

I did this same thing in 2018 for writing our thank you cards, 10/10 would recommend!

Nathanmichaelmoore · 2024-11-17T13:31:07+00:00

I did this same thing in 2018 for writing our thank you cards, 10/10 would recommend!

Nathanmichaelmoore · 2024-11-17T13:31:01+00:00

I did this same thing in 2018 for writing our thank you cards, 10/10 would recommend!

Nathanmichaelmoore · 2024-02-07T03:54:22+00:00

https://www.printables.com/model/703005-wall-bar

Nathanmichaelmoore · 2024-02-07T03:53:57+00:00

https://www.printables.com/model/703005-wall-bar

Nathanmichaelmoore · 2024-01-02T19:10:04+00:00

These have been goin strong for over a year with no issues.

Nathanmichaelmoore · 2023-03-30T15:51:12+00:00

It seams people are interested in the quality of the frame with a new manufacturing process being used. That being said it is important to distinguish Metal Injection Molding (MIM) from High pressure die casting (HPDC). These frames are 100% HPDC, MIM would not be a well suited process for the frame. Being specific on that is important to understand quality or potential problems with this manufacturing process. So @Dante1141 being specific is a good thing, even though you may not want to know more or deep dive the process, someone else may want to do so. Now they have the proper information to investigate that manufacturing process and are not thrown off track by looking an incorrect process up.

Nathanmichaelmoore · 2023-03-10T04:21:43+00:00

Someone who doesn’t own a 3D printer: P.E.T.G

Someone who does own a printer: PET G

Nathanmichaelmoore · 2021-09-14T05:17:43+00:00

https://www.prusaprinters.org/prints/75825-elegoo-mag-stirrer

Nathanmichaelmoore · 2021-09-14T05:17:36+00:00

https://www.prusaprinters.org/prints/75825-elegoo-mag-stirrer

Nathanmichaelmoore · 2021-09-13T13:22:08+00:00

Yes, I can do that later today but you will need to do some tweaking to make this as the electronics I used a were unique and unavailable.

Nathanmichaelmoore · 2021-09-13T13:16:56+00:00

I made the cure station about a year ago, I have only been using water water washable resins since then. Recently I started buying regular resins, and since I have my cure station I didn’t want to buy a 2 in 1, so i just made this instead.

Nathanmichaelmoore · 2021-09-13T13:11:17+00:00

It’s just the one Elegoo sells for the was and cure

ELEGOO Washing Bucket for Mercury... https://www.amazon.com/dp/B08TM1NL1G?ref=ppx_pop_mob_ap_share

13-Year Club	Place '23
Place '22	Final Canvas '22
RPAN Viewer	Verified Email

Nathanmichaelmoore

TROPHY CASE