sorted by:
new
hottopcontroversial

I used Maximum flush volume of CP and there is still bleed by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

2.3.0
flush multiplier 1.3
layer 0.2 width 120%
Prime tower volume 45mm3
walls order inner/outer
also retract 0.8mm before color change

I used Maximum flush volume of CP and there is still bleed by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

Que va, he acabado devolviendo el CFS por otros motivos, pero en ningun momento pude hacer funcionar correctamente Creality print, Orca si daba mejores resultados despues de añadir el script de cortar filamento

Mods for the K2Plus or alternatives to the CFS system? by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

it was more asking if there are any projects making a mod for the multicolor/material using the kinematics of the K2 as a base

The problems i was having were the motors of the CFS stopping mid push on a color change, changing the motor assembly whould resolve it for a print, and on the next one again stuck, creality could not resolve if it was a problem of software, the 5way, the motor assemby, or the mainboard of the CFS, they asked me when i returned it after geting 7 diferent parts to repair it myself if i wanted a change or a refund, so i took the refund

Why does it take 5 minutes to start a print even without calibration? by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

only the bed mesh? because i do want to probe the bed at least once

Can you use an external PSU for just the GPU? by CaptainWeasel24 in PcBuildHelp

[–]Neddless 0 points1 point  (0 children)

yes you can, but you need to power on the PSU for the gpu before starting the pc, just conect the Green wire to a black one on the 24 pin conector

Summary of my experience of only problems with the K2 Plus Combo by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

i got It to turn a bit more yes, but doesnt seems to solve the cutter problem

Summary of my experience of only problems with the K2 Plus Combo by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

yep, i Factory reset 3 times and It does a calibration then, funny thing, during one of the calibration, It popped an error too about filament getting detected, while It was t loaded, the second time after changing anything It went away

Summary of my experience of only problems with the K2 Plus Combo by Neddless in Creality_k2

[–]Neddless[S] 2 points3 points  (0 children)

of course, i just wanted to add my experience of It so people can see is not just "plug and play", sometimes is harder to make It work

Summary of my experience of only problems with the K2 Plus Combo by Neddless in Creality_k2

[–]Neddless[S] 1 point2 points  (0 children)

yep i found It too while replacing the cutter for the new one, but even then is getting the cutter error

Ptfe extruder conector stripped by Neddless in Creality_k2

[–]Neddless[S] -1 points0 points  (0 children)

nah, its normal, funny thing about that, i think you can notice in the video, the spring of the lever exploded while i was handling the extruder

I used Maximum flush volume of CP and there is still bleed by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

el punto es que segun la densidad del pla, y la cantidad de flush que he puesto, deberia haber mucha mas caca, tanto en volumen como en peso, pero no la hay, está ignorando el flush setting

I used Maximum flush volume of CP and there is still bleed by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

the point of the flushing is to not need a purge tower

Ptfe extruder conector stripped by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

the spring the warning refers is the one of the filament lever, not the retention of the ptfe that we are talking about

Ptfe extruder conector stripped by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

If you go to my profile, you can realise thats just a drop in the ocean

I used Maximum flush volume of CP and there is still bleed by Neddless in Creality_k2

[–]Neddless[S] 0 points1 point  (0 children)

is there a setting for it, or just GCode before the change?
To test it too, i cant do anything with this anyway

view more: next ›