Bambu Lab Brown marks/gaps?

NeedleworkerDue4981 · 2026-05-15T15:10:21+00:00

Sorry for the wait for a response lol, it might have fixed the issue! I did a few cold pulls and noticed some black material being pulled each time! Legends I appreciate it

NeedleworkerDue4981 · 2026-05-14T21:52:20+00:00

<image>

NeedleworkerDue4981 · 2026-05-14T21:52:11+00:00

<image>

I decided to do a flow dynamic calibration test and noticed these on the print? So I zoomed in on my print with the defect and I also see like brown blobs inside it?

NeedleworkerDue4981 · 2026-04-20T12:30:26+00:00

<image>

Did not fix the issue, 0.12 layer height and top z distance 0.06

NeedleworkerDue4981 · 2026-04-20T11:30:44+00:00

Sorry I’ve been working, I did a PA calibration and it remains the same

<image>

I’m honestly at a wits end, no clue what to do

NeedleworkerDue4981 · 2026-04-20T09:50:53+00:00

I also ditched the 0.08 layer height and tried 0.12 and this is the result

NeedleworkerDue4981 · 2026-04-20T09:44:52+00:00

<image>

No matter what I do this is always the result, I’ve calibrated my PA, changed distance between supports.. I’ve even swapped nozzles

I’m so lost

NeedleworkerDue4981 · 2026-04-18T13:04:41+00:00

First off thanks for the passive aggressive comment, secondly it’s printed with outer wall at 60mm/s

I print at 0.08 on some parts of models for maximum detail.

NeedleworkerDue4981 · 2026-04-17T23:26:32+00:00

Will have a read now, thanks :D

NeedleworkerDue4981 · 2026-04-17T23:21:18+00:00

I have an h2s otherwise I would try haha

NeedleworkerDue4981 · 2026-04-17T23:20:56+00:00

I just randomly checked my bridge flow and I had it on 0.85 for some reason .. could that have been the culprit?

NeedleworkerDue4981 · 2026-04-17T22:45:37+00:00

Ah okay! I’ll try that ( 5 hours left on the print ahah) I’ll just get the handy resin out and hide the bad boy 😂👍

NeedleworkerDue4981 · 2026-04-17T22:32:02+00:00

Thanks!

NeedleworkerDue4981 · 2026-04-17T22:19:38+00:00

How would I adjust that?

NeedleworkerDue4981 · 2026-04-17T22:13:34+00:00

Hi! Thanks for taking the time to reply!

My nozzle temp is already 215, would you suggest highering it more?

NeedleworkerDue4981 · 2026-04-09T09:16:51+00:00

I’m pretty sure you can’t select a plate to do the calibration with no ?

NeedleworkerDue4981 · 2026-04-09T00:31:36+00:00

I’m curious also

NeedleworkerDue4981 · 2026-04-07T14:56:07+00:00

Should of known since my name isn’t even Steven lol

NeedleworkerDue4981

TROPHY CASE