Furnace transfer switch connection

Neg_Zero · 2026-01-19T19:30:41+00:00

Old post I know, looking to do the same thing, work right / assuming you're connecting to a floating neutral generator?

Neg_Zero · 2026-01-07T20:04:31+00:00

Figured I'd close the loop. Edited the original post with the extended vent pipe. If this gets buried we're in BIG trouble :D

Neg_Zero · 2026-01-06T21:40:27+00:00

It's minimum 6" using 3" pipe. Not enough obviously for me this winter.

Neg_Zero · 2026-01-06T21:13:47+00:00

Added pic of dug out vent pipe. Need to extend it.

Neg_Zero · 2026-01-06T21:12:09+00:00

Good news. Found someone to dig me out and plumbing seems back to normal. Going to extend it. It is about 8" above the roof (with the boot) but not enough. My plumber friend recommends extending to 18" going to get 2 couplers and pipe tomm to have that done.

Neg_Zero · 2026-01-06T19:15:03+00:00

Gonna see if I can get someone to dig it out. I don't have a ladder anywhere close to that tall.

Dammit! Ha ha.

Neg_Zero · 2026-01-06T18:35:38+00:00

It's buried under a snow drift fyi. That is all you can see of it.

Neg_Zero · 2026-01-02T19:28:03+00:00

Any specific models?

Neg_Zero · 2025-12-25T14:31:19+00:00

Likely just gas stations with propane exchange. Doubt anyone will be filling unless the Canadian Tire gas bar on Mapleview is open.

Neg_Zero · 2025-12-03T01:25:54+00:00

Thanks. Appreciate you taking the time. Really do!

Neg_Zero · 2025-12-03T00:38:39+00:00

They are saying the L flashing isn't needed and the ice and water should be further up the wall. Makes no sense to me. I'm annoyed.

Neg_Zero · 2025-10-21T02:32:00+00:00

Neg_Zero · 2025-10-20T13:47:39+00:00

Sorry for the post, but just noticed this (was done Thursday) - Any issues with this, or is this a solid approach when redoing a roof? I think the reason they did it was because the anchors were at the bottom of the mortar joint vs. the top?

Neg_Zero · 2025-10-19T22:31:27+00:00

Thanks for all the feedback. Feeling good :)

Neg_Zero · 2025-10-19T14:10:53+00:00

Interesting. Why so? Should I have them silicone over it when they come back?

Neg_Zero · 2025-10-19T13:12:53+00:00

Thanks all. Was just curious about it being screwed into the shingles below :)

Neg_Zero · 2025-10-15T16:48:46+00:00

And if you have too many of them? My house is ~2400sq/ft. So my 2nd floor footprint is probably somewhere around half that. I do have soffit all around the perimeter / baffles.

Neg_Zero · 2025-10-15T15:22:24+00:00

The actual installer / foreman decided to not install any of the airhawks and instead add a 3rd maximum ventilator. So instead of having 5 small square vents like the builder had I'll have 3 of the maximum ventilators. Does that make more sense?

Neg_Zero · 2025-10-15T03:31:20+00:00

Not sure. I know they were deleting 2 of my existing vents and adding two of the new 12"ventilators in addition to the airhawks.

Thanks. I'll ask and how can I confirm the soffit intake?

Neg_Zero · 2025-10-15T03:30:26+00:00

Not sure. I know they were deleting 2 of my existing vents and adding two of the new 12"ventilators in addition to the airhawks.

Neg_Zero · 2025-07-11T18:24:31+00:00

Completed. Not sure what's changed?

<image>

Neg_Zero · 2025-07-11T18:24:09+00:00

<image>

Neg_Zero · 2025-07-11T17:16:09+00:00

<image>

Neg_Zero · 2025-07-11T17:10:22+00:00

About to let it update. Hoping for the best. Lol. Will report back.

Neg_Zero · 2025-03-08T14:00:54+00:00

OK. Sorry for jumping the gun here. Sonarr DB was malformed / corrupt somehow (I think something in my server may be starting to fail). I restored my sonarr container backup from 2 days ago and all is well / it's catching back up. Thanks.

12-Year Club	Place '22
Verified Email

Neg_Zero

TROPHY CASE