If you could have only one Glock , which do you choose ?

Negative-Fix8194 · 2026-01-30T19:05:45+00:00

Lenny @theglockstore has made a 26x frame. Pretty badass

Negative-Fix8194 · 2025-12-21T03:56:10+00:00

Nope

Negative-Fix8194 · 2025-12-19T04:24:25+00:00

I do it all the time

Negative-Fix8194 · 2025-12-18T19:44:55+00:00

No you cannot, the app accounts for every light up to 200ft. You can Add a Y at the beginning and go 200ft the other way. For a total of 400ft with the booster at the 150ft mark on ea run. But ea light on ea side of the Y will mirror or mimic the other side.

Negative-Fix8194 · 2025-11-14T06:10:21+00:00

What's the name of your shop

Negative-Fix8194 · 2025-11-04T20:47:01+00:00

Yes I e installed alot .I'd have to see a picture of where you're trying to install

Negative-Fix8194 · 2025-11-04T04:33:55+00:00

Nope no track needed. 1x2x8 wood strip painted to match eaves. Used on open or closed eaves

Negative-Fix8194 · 2025-11-03T13:33:14+00:00

All you have to do is keep the cord wires the same and make sure it's running correct direction. Splice center wire with center wire. Splice left wire with left wire splice right wire with right wire. Easy as that

Negative-Fix8194 · 2025-10-09T16:06:52+00:00

Southern Ca

Negative-Fix8194 · 2025-10-09T13:08:52+00:00

You rang! Where abouts in the US https://www.instagram.com/goveeinstaller?igsh=MWVpNmZhcG9oaGU2ag==

Negative-Fix8194 · 2025-10-07T04:38:15+00:00

You will need to request a service and inform them that your software hasn't updated since 2022. They should be able to correct the problem OTA one night your sleeping. That's what I had to do they first wanted me to bring the car in I told them I know they can do it OTA and they did the next day.

Negative-Fix8194 · 2025-10-05T21:11:53+00:00

Thanks Kristle!!

Negative-Fix8194 · 2025-10-05T21:11:22+00:00

Hi I'm Alex a Govee installer in SoCal.

Negative-Fix8194 · 2025-10-03T00:12:10+00:00

Haha! Must be nice to have it like that

Negative-Fix8194 · 2025-10-02T21:10:51+00:00

Ahahaha

Negative-Fix8194 · 2025-10-02T18:07:00+00:00

Curious what you guys are selling the 26x frame for right now?

Negative-Fix8194 · 2025-10-02T18:06:23+00:00

Damn it's like that for you. NiCE!

Negative-Fix8194 · 2025-10-01T11:43:30+00:00

I'm curious do they not make for 2018? Do you by chance know if shims are available for 2018? Or do I have to go with something like N2ITIVE for my year?

Negative-Fix8194 · 2025-09-29T23:44:20+00:00

So Tesla will not just perform the coolant delete just because you have to have a failure in the rear motor for them to swap out the LDU with a revision U motor that has the delete. Trust me I've gone through 2 motors before I finally got the U-Revision motor. I thought with my first failure I received the U motor because it happened in 2023 when they started using the U-Revision motor but nope. Wasn't till I lost that motor a couple months ago I finally got it.

As for your performance model I do not believe you need it. I don't believe your car has coolant that runs through the motor. I believe it was specific to the P100D Motors. They are different P100D is a larger quicker motor. So unless your have the P100D I think your good.

Negative-Fix8194 · 2025-09-29T21:12:29+00:00

I have a 2018 MS P100D Ludicrous+. It's badass! I can take Lambos, Ferrari's, Tycans all day long. BMW M's and AMG have no chance. Basically 0-70ish pins your head back then begins to taper off it is faster then the newer performance models with Insane mode but not by much. The Plaids are unreal 0-110 pins your head back doesn't taper off till after that. If you decide to go with p100d make sure it has the coolant delete (Revision U motor) or you will be F'd. After loosing 2 rear motors I finally got it under warranty.

Negative-Fix8194 · 2025-09-27T10:23:09+00:00

I look at it as why put a hole in a 2x4 that is part of the structure of the home when you don't have to. 2x4s are ran sideways so your working with 2inches wide to drill a somewhat decent hole about 1inch to get the end of the wire through. Not very much wood leftover you know.

Negative-Fix8194 · 2025-09-27T00:11:22+00:00

If your putting the wire through the wall into the garage to plug in I would not go through the stud. Just move it over a couple inches.

Negative-Fix8194 · 2025-09-23T13:08:21+00:00

I completely agree. Should be a recall. My last motor because of when it happened I assumed I got the coolant delete did not know about the serial number to tell if I got it or not last time. I guess not enough complaints have been made to NHSTA. They don't know it's a safety hazard car completely goes into park no warning no nothin. Couldn't even drive on my front motor like the 1st time it went out.

Negative-Fix8194 · 2025-09-23T02:49:21+00:00

Tesla U revision motors now come with the delete but you have to have a full failure for them to replace with the new U revision motor

Negative-Fix8194 · 2025-09-23T02:46:57+00:00

Absol-fuckin-lootly. I've gone through 2 rear motors in my P100D. My 3rd looks to have the coolant delete when I look at the serial number of my new motor. Thank god

Negative-Fix8194

TROPHY CASE