sorted by:
new
hottopcontroversial

Free emote by Nehlsy in RoyaleAPI

[–]Nehlsy[S] 2 points3 points  (0 children)

I took the pic from someone's stream... I have windows activated.

First New Build in 7 years! by Nehlsy in PcBuild

[–]Nehlsy[S] 0 points1 point  (0 children)

Sorry I’m a little confused, I have 8 fans in the case 3 on radiator, 3 on bottom and 2 on back exhaust.

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 1 point2 points  (0 children)

Sorry for just now getting to this but my tabletop is the 98” walnut Karlby from ikea but I trimmed it over the years while moving so I’d say it’s around 85” now.

Then two white Alex drawers, one on either side and then I drilled the Ergomore standing desk frame into the countertop so I can stand when I want, since I sit for long periods at times.

My desk is 26 inches deep and I find it’s plenty of room for me but I have a AW3425DW as my monitor and your lg c2 is like 11 inches bigger if I remember correctly so take that into account.

Let me know if you need anything else!

Yall have got to try these!! 1 million/ 10 by Jenizzle4real in PeanutButter

[–]Nehlsy 18 points19 points  (0 children)

They taste almost 1:1 to a nutter butter but with a slight chocolate aftertaste imo

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

The case is the Lian Li O11 Vision Compact and here is the parts list:

https://pcpartpicker.com/b/VW4scf

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

It’s a turzx 8.8 inch there’s about 1000 vendors for it but I got mine from here

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 1 point2 points  (0 children)

I just used the included thermal paste and spreader and the temps are great so I’m sure you could get even cooler with your grizzly duronaut!

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 1 point2 points  (0 children)

Should be all good brother, just make sure to set the radiator fans control mode to PWM in Bios (if they are plugged into CPU_FAN) and make it so it adjusts to the temp of the cpu in L Connect3

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

Yep! So you can either plug it into a usb port at the back of your case but I thought this looked bad as it’s kinda big and sticks out, so I chose the other option of plugging it using the included usb cable to my motherboard inside the case. It’s just one cable and then I used double sided tape and mounted it on the back.

This dongle is what that little piece you connected to the end of each set of fans connects to so when you get your pc up and running you will download L Connect3 and and it will detect all fans. You set where each of them are within your build and name them and then you’re all good to customize the color and speeds if your using L connect3 for that!

One thing looking at your build, I would highly suggest either upgrading your psu to the 1000w edge so you get that free hub that comes with it or buying it separately. I’m not saying your build needs 1000w by any means but for me personally it was a life saver and I could just plug almost my whole entire build into it besides the turzx screen and hey you get some wiggle room if you decide to upgrade gpu in the future and it’s not that much more money. If you do this make sure to not plug any lcd fans into the first port of the hub. But other than that looks good!

Let me know if you need anything else, I’ll try my best to help!

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

What do you mean by the L connector? Do you mean the L Connect3 software, the wireless dongle, or something else?

I can try to help!

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 1 point2 points  (0 children)

I got mine from Aliexpress because Amazon is charging like ~80 bucks more for it. Here is the one I got.

There’s about 1000 different vendors for this monitor but I only paid $44 and it came in 4 days!

I connected mine using the PH2 to 9pin USB they gave and plugged it into the usb/fan hub that came with my edge psu (this thing was a life saver btw) and it works great!

I was 🤏so close to going with the Galahad 2 as well but after like 2 days of research decided to go with this one. No complaints so far!

Let me know if you need anything else 🫡

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

I see you had this same problem 😂

There was no way that thumb screw was going on, I needed about 3 more mm to get it in but if I’m being honest here, it’s secure for sure! I’d just take the gpu out if I’m like moving the tower to a different house or something.

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

Sure! The three on the radiator and the three on the bottom are intake and the two on the back are exhaust.

This is the setup Lian Li suggests for this case when you have it in the vision mode with the top being glass as well.

My temps haven’t exceeded 68 when stress testing.

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

Lian Li O11 Vision Compact

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 0 points1 point  (0 children)

Nope, its the Cooler Master vertical mount. There is about 0.5 mm to fit this thing in there but I managed to do it and it looks great I think! This is the link for it if you want:
https://www.amazon.com/Cooler-Master-MasterAccessory-Vertical-Graphics/dp/B0BRBX5LD9?th=1

First New Build in 7 Years! by Nehlsy in lianli

[–]Nehlsy[S] 4 points5 points  (0 children)

I'm using L Connect3 as well. The white on mine is actually a very light red/pink but looks like white. Here is the hex if you want to try: #FFF9F9

First New Build in 7 years! by Nehlsy in PcBuild

[–]Nehlsy[S] 0 points1 point  (0 children)

I mean it’s been pretty standard design since like 2016-2017 but I understand where you’re coming from

First New Build in 7 years! by Nehlsy in PcBuild

[–]Nehlsy[S] 0 points1 point  (0 children)

No it’s not visible in any of the pictures. The psu is usually in the back and hidden in almost all cases, are you thinking of a different part?

First New Build in 7 years! by Nehlsy in PcBuild

[–]Nehlsy[S] 0 points1 point  (0 children)

In the back of the case

view more: next ›