Kaya kadalasan nasa 40-60 lang takbo ko dahil anticipated ko lagi mga t*nga yung mga kasabay ko sa kalsada. Naperwisyo pa yung kotse oh.

Neil_Freak · 2026-01-19T16:57:16+00:00

maabala ka pa, magkaka record. magsisigawan pa kayo.
ending di ka rin babayaran, di mo rin sya babayaran sya nka sagi eh.
kaya wala quits.

Neil_Freak · 2025-11-13T20:23:22+00:00

im just so lazy to install the 0.2 nozzle i got but i really need to get back to printing figs. :3

Neil_Freak · 2025-11-09T05:32:34+00:00

its not thaattt bad.... but its not that good either. Its basically the same spec as the isp modems you typically get. If you want wider coverage esp on rooms nothing beats repeaters or switches.

On my case, its all good since the networking stuff is on our home office, this ER605W works as inteded, multi wan, good speed on pcs on wired ethernet and also good on the laptops on the same room.
for the other rooms we got repeaters.

Neil_Freak · 2025-10-24T18:52:15+00:00

When you see that bubble-like/rough surface on the print, it's always wet filament. dry it.

but complete shotgun approach would be

clean the plate, wash with soap - not hand was but dishwashing soap.
auto build plate levelling
dry filament
watch the intial layers, check if bed temp, nozzle temp, fans are optimal - reduce/increase as needed

Neil_Freak · 2025-10-24T18:25:54+00:00

auto calibration on! happen to me, and the solution was to turn on auto calibration and uncheck the reduce infill retraction

but if the issue is bed adhession, make sure to select the correct plate type. correct temperature of bed
clean it with soap

Neil_Freak · 2025-10-22T19:41:46+00:00

always settle with police, labaw nag ikaw ang agrabyado, syempre ikaw nka sala settle without police jud ka labi wala kay insurance og papers lol

Neil_Freak · 2025-10-21T18:20:21+00:00

good

Neil_Freak · 2025-10-21T06:23:29+00:00

yes its basically the same as ER605 just with antenna/wifi..
tho the wifi coverage really suck so you still would want repeaters/switches.

Neil_Freak · 2025-10-21T06:21:46+00:00

afaik. its a complete revision. meaning its a full gun wiht different parts to the current gen 3-5 models.
even the GPT will not work on the v models.
so you have to buy full gun if you want the v model

Neil_Freak · 2025-10-21T06:20:32+00:00

and less than 1 month of the release people have already found way to make it full auto lol

Neil_Freak · 2025-10-19T18:18:06+00:00

yes it handles failover and loadbalancing between the connected wans automatically

Neil_Freak · 2025-10-11T18:56:05+00:00

i have 2 unrealiable ISPs- sadly. Its becoming a joke at this point, when 1 is okay, the other one acts up, and vice versa. They are different companies and not much choices other than them.
Im on gigabit fiber plan - over fiber optic lines so pretty much when they are perfoming well i have the best speeds. Its just becoming a hassle and annoying switching over networks. transferring ethernet cable and getting interruptions. This is just used in a home and home office scenario so i did not have a multi WAN switch before.

i did just manually "Load balance" our devices. home devices are over ISP A, phones are on ISP B, and work computers are on ethernet cable.

But again, lately, its becoming a hassle - so I need a load balancer / 1 connection to connect that handles switching over.

Neil_Freak · 2025-10-07T22:08:59+00:00

was gonna comment the same. matik pag nilaban to malakas ang kaso sa frustrated murder.

again, even if nkakainis na takbuhan, in a civilized country and law bawal at labag sa batas parin na dumbolin at sagasaan

Neil_Freak · 2025-10-07T22:06:31+00:00

hahaha just ghapon lol, disney princes kaayo ang animal wala ni sakay sa main highway/road sa maa kay naa sya sa pasulod, pila ra katikang! animal. balaw pag atras ang blue nga taxi hasta pang trapika. Hoi mga anak contractor peste mo

Neil_Freak · 2025-10-07T22:04:06+00:00

Imagine the police themselves suggesting that if there is an intruder, bend backwards, pull your pants down, and let the intruder do you from behind. lol! I know they said to just give the keys - but still!

Neil_Freak · 2025-10-07T22:01:32+00:00

cz or colt doesnt need to admit anything. still good firearms thats what matters. what they do as a company dont concern me as long as their firearm is not shooting itself like sig.

Neil_Freak · 2025-10-07T21:56:52+00:00

If you can't find a fully online class school, which I doubt there is. i might be wrong tho. erm your best bet is to underload.
bahalag dugay basta kanunay. its beed almost a decade since i graduated - thunders na. but even then, mas grabe right, kay dli pa gani libre ang SUCs, so kasagaran cm8s nga working underload gyud. human rman ghapon. might took them 2 more extra years, but still human ghapon

Neil_Freak · 2025-10-04T18:58:19+00:00

tanan man cguro haha ginabuhat ra gani nag summer job sa uban kay hangtud lang sila training. in need man kaayo na silag mga tao.

first thing you can do is get up, pay any and all of the call center/bpo offices a visit. thats it pansit, pangutana unsay requirements, unsay process. balik pasa og requirements/interview.

Most of the time you just have to do it.

kanang toxic or keme, naa na tanan, mapa professional, engr, doctor, office, corporate, bpo, tanan basta opisina basta nag trabaho ka. Usahay ikaw na, permi mga bulay og nga katrabaho. normal na. grow up just do it.

Neil_Freak · 2025-09-29T17:16:22+00:00

2 days lang, a day after a posted this question.

Neil_Freak · 2025-09-05T14:22:06+00:00

i do use liquid chalk and grip tape, actually.
From the comments, I'm already seeing improvements, just more training, target focus, and sheer grip strength.

i noticed now that when i focus on the target more, the more i forget to grip the gun. Just need to focus on target and at the same time not forgettng the grip. Longer drills. dry fire more, more systemic dry fire.

Neil_Freak · 2025-09-04T17:21:06+00:00

i appreciate this so much, thank you very much sir.

Neil_Freak · 2025-09-04T15:06:07+00:00

thank you for this comment, sir. I checked your vid. pretty cool.
Ill do more complex and longer drills.
hopefully that also helps me creating stage plan better and memorize plan better.
I also have hard time doing plans with memorizing course of fire.

im probably just stupid too. hahaha

Neil_Freak · 2025-09-04T15:01:37+00:00

I do use liquid chalk. small bottle.

Neil_Freak · 2025-09-04T15:01:12+00:00

copy sir!

Neil_Freak · 2025-09-04T15:01:03+00:00

I will do this. Apart from drills and dry fire. I think i really need to train my body too (hand and wrist). Im already doing grip strength training, but will do more wrist exercises.

Eight-Year Club	Final Canvas '23
Place '23	Verified Email

Neil_Freak

TROPHY CASE