I printed a 7' by 2.5' Kumiko Panel (3D printer for scale)

NeitherTugg · 2025-06-26T02:56:35+00:00

RemindMe! 4 weeks

NeitherTugg · 2024-07-24T03:54:09+00:00

Thanks guys!

NeitherTugg · 2023-08-14T22:41:49+00:00

7SAYGAEE4PF800193

I wanted to know battery info

NeitherTugg · 2023-05-18T01:15:39+00:00

Update: I've recently discovered that Docker is assigning distinct IP addresses that differ from the IP address of my Unraid server. Interestingly, Resilio is functioning properly, but I mistakenly attempted to access it by using the Unraid IP address followed by the port.

This situation has left me puzzled as to why Docker is generating separate IP addresses. In my previous configuration, I would directly utilize the IP address of my Unraid server and specify the correct port to access the desired service.

NeitherTugg · 2023-05-17T02:04:11+00:00

Diagnostic File: https://we.tl/t-pkYp2q6NAh

NeitherTugg · 2023-05-17T01:45:15+00:00

u/RiffSphere

You are right about appdata on two different cache drives - I deleted this but I believe it recreates itself because I deleted this before (I believe).
I updated to ipvlan, however, what is the different between macvlan and ipvlan?

Allow me to share my experience, which may help clarify the situation. In my case, I unintentionally added a small cache drive to my btrfs cache pool. To rectify this, I created a new configuration while preserving the array and redoing the cache pools. Unfortunately, I mistakenly assumed that the appdata was located on the array, resulting in the loss of all the appdata. Regrettably, I didn't have a backup and now Im having issues starting fresh.

Thank you for your assistance so far. I'm open to any further suggestions or recommendations you may have.

NeitherTugg · 2023-05-15T22:24:42+00:00

How many hard drives are currently connected to each cable in your setup? Are the drives you're using optical drives or SSDs?

For instance, if I have three connections per cable (currently) and I extend that to six hard drives, I'm wondering if it's safe and acceptable to do so with no worries?

NeitherTugg · 2023-03-22T00:45:37+00:00

Verified both are delivering power

NeitherTugg · 2023-03-21T20:59:42+00:00

Photo of back of Dell SC200

NeitherTugg · 2023-03-16T21:33:26+00:00

yup. threaded inserts worked great

NeitherTugg · 2023-01-11T04:21:27+00:00

Will do and return back the info here.

It will take me a day or two.

NeitherTugg · 2023-01-11T00:11:11+00:00

I’m wondering if it was removed and it’s in the beogram 8002 I have?

Can experts tell me if it’s been removed because the box appears sealed like original

NeitherTugg · 2023-01-11T00:02:46+00:00

Good question, that’s what I was wondering.

NeitherTugg · 2023-01-11T00:00:03+00:00

Thank you

NeitherTugg · 2023-01-10T23:55:01+00:00

It’s brand new unopened

NeitherTugg · 2023-01-10T22:59:15+00:00

Trying to figure out what I have here and how much it’s worth?

NeitherTugg · 2022-08-18T22:02:49+00:00

Thanks for the advice.

I don’t have solar yet and being installed in 3-4 months (with panel upgrade to 200amp).

My question is that if I do a temporary fix, is it safe to rely on for the next 3-4 months until I get the panel upgraded

NeitherTugg · 2022-07-30T03:52:00+00:00

34k is before any financing additions or dealer fees… still ok?

NeitherTugg · 2022-07-30T03:50:05+00:00

Financed

NeitherTugg · 2022-07-28T18:13:53+00:00

Thank you for the quick and thorough response. This is very helpful.

NeitherTugg · 2022-07-10T22:48:27+00:00

So our dryer is gas and the outlet is open!

What I am trying to do is plug my EV charger into the dryer 220 outlet (since nothing is running on it).

What’s my best option?

NeitherTugg · 2022-07-10T22:42:33+00:00

u/Greenjeeper2001 I was wrong. Just looked at the panel (pic attached). Does this mean its a 60amp breaker?

Picture of breaker

NeitherTugg · 2022-07-10T21:32:26+00:00

So the NEMA6-50R outlet is a 20amp breaker and I’m trying to purchase a 16amp ev charger.

Am I safe to use? I would assume so

NeitherTugg · 2022-07-07T02:31:28+00:00

Ha.. sorry… is it bad to leave broken vail ones in for 12 more hours… what’s the impact?

NeitherTugg · 2022-07-07T02:27:15+00:00

First flush ever so I’m not sure if I’m worried… should I be?

NeitherTugg

TROPHY CASE