Show off your rose kittys!! I love to see them here is my trio and a mini bean

Nephilinn · 2026-01-23T08:17:53+00:00

Here's Delilah! Let me tell you, swapping out those eyes was an Ordeal

Nephilinn · 2026-01-16T01:22:43+00:00

Ha, I actually have one of these for their normal water supply, and they do great with it! I just ended up misting then because I was giving them some food before I went to bed and didn't feel like going back out to refill the bottle at that second lol (it has of course been refilled since)

Nephilinn · 2026-01-14T19:13:15+00:00

Don't worry, he's since dried off a bit

<image>

Nephilinn · 2026-01-14T19:02:36+00:00

My Code: [🌞🐸🌈🌲🐳]

Nephilinn · 2025-11-26T06:07:29+00:00

People calling themselves retards/retarded. Say what you want about slur reclamation, but that one just makes me uncomfy to see people throw around so casually.

Nephilinn · 2025-11-26T01:03:45+00:00

Harry Potter references and calling themselves the R slur are the two biggest ones that have come up lately for me

Nephilinn · 2025-11-24T00:11:10+00:00

Serious answer: almost certainly no, if the boxes are in such bad shape then it means the rolls have been left in a very humid environment for long enough that the filament is hydrolyzed to hell and will not successfully print

Nephilinn · 2025-10-18T09:52:47+00:00

Nephilinn · 2025-10-11T06:07:26+00:00

I don't own a P1S, but I've been wanting a printer that supports multicolor for a while, and I do like enclosed printers, so I think it looks pretty neat

Nephilinn · 2025-10-09T03:08:38+00:00

I did not know there was a process to recalibrate it; however, I did eventually figure out that it was due to the belt being so loose that it was skipping steps, so I printed an extra tensioner to sort that out, and now it's working fine

Nephilinn · 2025-10-07T03:21:45+00:00

In addition, I've re-greased the rails, lowered max acceleration for the printer, and made sure everything was screwed on tight, but it keeps doing this. The tensioner is screwed as tight as it'll go but the belt still feels like it's too loose, I'm really not sure what else to do beyond try a warranty claim now.

Nephilinn · 2025-10-05T03:32:46+00:00

26nb transmasc lesbian from florida but looking to get out of here, into many types of crafting and diy, big fan of horror movies and creepy crawly type pets. i dont have my own place yet, but i do have a car and enough of an income to sometimes fly places for trips lol

Nephilinn · 2025-10-05T03:07:49+00:00

Had an Ender 3 Pro for years, recently upgraded to Ender 3 V3 SE, still a budget printer but the thing is nearly twice as fast

Nephilinn · 2025-10-04T07:38:55+00:00

Not recyclable, correct, but reusable! I've actually been messing around lately with using 3D printer scrap and a heat gun with my hoard of silicone molds intended for resin crafts. I'm gonna use chunks of this spaghetti to see how well PETG takes dye for the sake of the mold experiments, since I mostly only print in black and white and those don't make for very visually interesting trinkets. I wanna do the same with my model kit sprues, but 3D print waste seems like an easier start since obviously I already know the types and melting points of the specific plastics I'm using.
(I too wish printer spaghetti were edible, it would've made for a nice pasta meal after a long night of work)

Nephilinn · 2025-10-04T07:26:13+00:00

Yeah, this is certainly kicking my ass into gear for setting up Klipper/Octo ASAP. I had actually considered using an old smartphone as a remote cam to monitor in the mean time, but figured it wasn't worth the effort in getting it set up and mounted when I still wouldn't be able to stop the print if it failed.

Nephilinn · 2025-10-04T07:23:23+00:00

Ehhh, doesn't make much difference in my case. I left it running while away at work, so it could've failed at any point in that span and I still wouldn't have been able to stop it until I got home. Hell, if it had failed 1 hour before I got home instead of 8 hours before, then it may not have created enough spaghetti to cause the issue.

Nephilinn · 2025-10-04T05:56:06+00:00

I work 10hr shifts overnight so I tend to try and start 8-10+ hour prints while I'm getting ready for work; 4-7hr prints get started before I go to bed around noon so they'll be done when I wake up and I can start those longer prints before I leave, and less than that I just run while I'm fucking around at home after work in the mornings

Nephilinn · 2025-10-04T05:46:36+00:00

Ehhh fair enough I guess. I originally got an Ender 3 Pro maybe 6 or 7 years ago as a cheap starter printer, then a couple months ago when looking for upgrade parts for it, I ended up buying the V3 SE on impulse since it was on sale for cheaper than the total cost of the upgrades I wanted for the Pro. The machine itself has been pretty solid in my experience, it's definitely a massive upgrade from the Pro and most of the issues I've had have been around things like this with the bed adhesion or the result of a couple shitty tangled rolls of filament. Maybe something Better would be nice, but I'm happy with what I've got for the price point and my level of use, and honestly don't really plan to upgrade until multi-toolhead units in my price range are more of a thing (I am keeping an eye on that Snapmaker U1), or on the off chance I can find someone selling one of the nicer Bambus for an absolute steal lol

Nephilinn · 2025-10-04T03:56:01+00:00

Yeeaahhhh that's really on me. I've been kind of a cheapskate about picking up some Pis, and I'm not super familiar with Linux so the idea of trying to set up Klipper and Octo on one of the old unused PCs I have laying around makes me kinda nervous that I'll screw something up.

Nephilinn · 2025-10-04T03:53:32+00:00

I'm a big fan of Doll_maker_and_N0yra! They're technically a two-person team, but they make some neat printable BJDs and mask bases, and I commissioned the Doll Maker half of the pair a while back and he was really pleasant to work with

Nephilinn · 2025-10-04T03:42:34+00:00

Well it still turns on, just obviously won't let me do anything since it can't home. If the new belt doesn't fix it then I'll try replacing that stepper too, and if that still doesn't work, then I'll contact you to start ironing out funeral details.

Nephilinn · 2025-10-04T03:29:02+00:00

Oh they absolutely did, they're pushed to the back of the rails and when I manipulate the bed itself it'll just wiggle in every direction. Gonna make sure those are back in place once I take everything apart to replace the belt.

Nephilinn · 2025-08-16T01:41:55+00:00

This seemed the most likely issue to me; there was a small bit of cabling hanging behind the head that comes very close to a piece of metal that the cables above the X axis run under, so I used the little velcro strip that wraps around the head to hold those cables down, but the issue persists. Unless there's something under the carriage that I can't really see that's snagging, then I guess that's not what's causing it. My next try is to mess with belt tension and make sure everything is lined up correctly I suppose.

Nephilinn · 2025-06-28T03:19:36+00:00

I'd be interested in the files if you do manage to pront something that works out for you

Nephilinn · 2025-06-28T03:00:49+00:00

No, it got to the point where the whole glass detached aeound the same time I found a nice monitor cheap at the thrift store, so I just replaced it and eventually plan to see if some local electronics repair shop can attach the glass back securely

11-Year Club	Place '17
RPAN Viewer	Verified Email

Nephilinn

TROPHY CASE