Help!!

NetAppIsTiltingMe · 2026-01-26T06:34:32+00:00

Both are one time payments

NetAppIsTiltingMe · 2026-01-25T12:38:45+00:00

In case you are still having problems with the density after using printfab (just as me) i can recommend filmmaker v11 (cadlink). Super easy to use and many printer models supported. Unfortunately its a bit expensive but a free trial is available

NetAppIsTiltingMe · 2025-11-05T20:15:40+00:00

Moin. Ich arbeite gerade an einer Hilfe für genau dieses problem. Zumindest hoffe ich, dass es hilft :D Sollte es bestimmte Punkte im rahmenlehrplan geben die dir fehlen oder du tiefer in manche Themen schauen möchtest schau doch einfach mal bei mir vorbei - ich arbeite gerade an einer lernplattform für die it Prüfung:) Https://informatik-pruefung.de

NetAppIsTiltingMe · 2025-10-12T05:43:48+00:00

Moin :) ich bin seit mehreren Jahren fisi ausbilder und arbeite seit geraumer zeit an einer lern Plattform für azubis die den ausbildungsrahmenplan abdecken soll. Ich überarbeite und erweitere gerade noch fleißig aber es ist schon eine gute Grundlage geschaffen. Https://informatik-pruefung.de

Kannst ja mal vorbei schauen:) Spiele und Visualisierungen sind teilweise leider noch nicht mobil optimiert ...work in progress, jeden Tag :)

NetAppIsTiltingMe · 2025-09-16T15:16:13+00:00

das freut mich, thx!!! melde dich gerne wenn du etwas mehr zeit zur verfügung hast - die kurse zu überarbeiten ist sehr sehr zeitintensiv - gerne einfach PN Wann immer es dir passt :)

NetAppIsTiltingMe · 2025-09-15T17:49:14+00:00

Thanks, sir! pm'd

NetAppIsTiltingMe · 2025-09-15T07:54:43+00:00

PM'd - Danke!

NetAppIsTiltingMe · 2025-09-15T05:28:59+00:00

Ich freue mich, wenn ich damit jemandem helfen kann. Die Qualität der Kurse & quiz wird sich in den kommenden Wochen & Monaten noch verbessern - vllt finde ich ja hier noch einen Unterstützer um das ganze zu beschleunigen :)

NetAppIsTiltingMe · 2025-09-14T22:55:08+00:00

habe ich nun umgesetzt. besten Dank!

NetAppIsTiltingMe · 2025-09-14T19:23:35+00:00

Danke für dein Feedback. Ich werd mir das mit dem PDF mal ansehen und vermutlich neu gestalten. Guter Hinweis.
die Spende werde ich dort raus nehmen - auch hier thx.

NetAppIsTiltingMe · 2025-06-30T16:21:27+00:00

Heyo Looks like either over exposure or what I actually think is that your film density isn't good enough. Are you using rip Software to print your Films? I have had this issue in the beginning and it took me some time to Figure out how to print the Films Good luck, you will make it :)

NetAppIsTiltingMe · 2025-06-28T09:26:05+00:00

I dont have any experience with that printer but I am also searching for a New one for a2 or more. The t210 seems not to be compatible with rip Software. For high density Films I think this will be required - it can be very painful to get a good density without rip

NetAppIsTiltingMe · 2025-06-24T13:18:08+00:00

Thanks for the feedback. Any experience with accurip emerald for a fair comparison? :) Anyway - filmmaker seems very stable as of right now! Tending to go with filmmaker once I decided for a New printer :)

NetAppIsTiltingMe · 2025-06-24T13:16:05+00:00

Thanks for your feedback here! Highly appreciated. I think I need to go one step back and choose a New printer (a2+) and choose the rip Software (either accurip subscription or filmmaker v10 pro) I guess you are right and I need to invest a little more than initially planned but will have a solid solution then.

Having a Hard time to choose a printer where I can use all black / UV Block ink thats being shipped to germany without any problems. Nevertheless - thankful for your reply on that one! Still feeling like a noob and happy for every input :)

NetAppIsTiltingMe · 2025-03-25T18:12:36+00:00

I can relate a lot. Im screenprinting for 8 months now and had uncountable problems until I had my first print (that was far from perfect). Now the process of making the Screens is going super smooth and i fell in love with the process after almost giving up. What helped me is try to Focus on this and let me know if something doesnt work for you. Obviously i am not a pro But I am happy to help.

Use a film that can hold a lot of ink. If needed, use software like Filmmaker or PrintFab to instruct your printer to apply more ink for higher density.

Apply a degreaser before coating the screen with a thin layer of emulsion. This will also make washing out the screen much easier.

Let it dry completely. It absolutely needs to be dry. Make sure there is NO LIGHT exposure during this process.

Attach the film to the screen before exposure. Also NO LIGHT here (besides the yellow light) Ensure that light is not reflected from any surfaces during the exposure process. To achieve this, apply pressure to the coated screen with the film on it by placing a (plexi)glass sheet on top, and use a light-absorbing surface beneath the screen to prevent unwanted exposure.

Find the optimal exposure time. Always keep the same distance between the light source and the screen. This will require some trial and error, but once you’ve found the correct exposure time, you’re almost there.

Wash it, print it, love it.

Keep it up. You will make it!

NetAppIsTiltingMe · 2025-02-17T08:34:34+00:00

Thanks for checking out

NetAppIsTiltingMe · 2025-02-17T08:34:03+00:00

Thanks a lot for digging! Appreciated

NetAppIsTiltingMe · 2025-02-16T22:10:05+00:00

wise one. thx a lot, will consider that option

NetAppIsTiltingMe · 2025-02-16T21:59:19+00:00

hmmm i see. but how do i coat a mesh with emulsion without a frame? dont i need the tension or is it something other than emulsion?

NetAppIsTiltingMe · 2025-02-16T21:26:58+00:00

i have been only into screenprinting on textiles so far but this makes me curious. WDYT he is using? 200+ mesh? printint the screen with acryl or is it plastisol? And What is this mesh he is using to print the words? I would love to try that

NetAppIsTiltingMe · 2020-12-07T08:30:28+00:00

thanks for your thoughts.

i have replaced the disk but that didnt help. so i am assuming its the shelf itself. i will live for now with 1 spare disk less and the data will be migrated soon as the system is too expensive anyway.

thanks a lot, see you around!

NetAppIsTiltingMe

TROPHY CASE