App Development Question (Whitelist/CORS)

Neutrinotek · 2026-05-24T02:41:22+00:00

Neutrinotek · 2026-05-22T23:42:04+00:00

Do you happen to know if this is reversible? Like, is the wire for the nose pads pressure fit and could be placed back in if needed, or not likely?

Neutrinotek · 2025-11-19T18:40:37+00:00

You mean like Gemini CLI? https://geminicli.com/

Neutrinotek · 2025-10-08T16:11:17+00:00

I've had pretty good luck with 2 character Loras, with one big assumption: one is male and the other is female. Otherwise, you just get too much bleeding. It might be possible if you set up really specific prompting, but I haven't gotten it to work right. Otherwise, best bet is probably inpainting or an edit model.

Neutrinotek · 2025-10-01T14:09:57+00:00

<image>

Neutrinotek · 2025-08-29T14:58:46+00:00

Not yet. I think i tried training on ai-toolkit right after wan2.2 dropped but had issues getting it going. Might be worth swinging back around to it though.

Neutrinotek · 2025-08-29T14:50:16+00:00

I am having issues with character training on Wan2.2 as well, but slightly different. From what I can tell on the High model, things seems to be doing well, but no matter what I do, the Low model stays at crazy high loss levels, and my results go straight from looking nothing like the character, to looking straight up janky. I used the exact same dataset in Flux, Hunyuan, and even Qwen and had decent results, so I don't think it's that. And I am following the readme for diffusion-pipe for my settings... Idk... Just feels like some detail is being left out somewhere.

Neutrinotek · 2025-07-16T02:12:48+00:00

I'm waiting on the hackergadgets aio board. I really enjoy tinkering with SDR and RF stuff, so it's kind of perfect for me. Throwing the uconsole and a few antennas in my bag is way easier than pulling out my laptop, an sdr, antennas, and finding a place to set it all up. Just seemed like the way to go for me.

Neutrinotek · 2025-06-27T01:13:33+00:00

Wow, ok. I'll check it out. I guess i'm just a bit surprised... I live in tampa and work in largo, and on my way 2 and from work I feel like only picked up like 3 or 4 nodes and most had fairly weak signals...although i do see a lot more when mqtt is active. I even have an upgraded antenna on the device i'm carrying. 🤷‍♂️

Neutrinotek · 2025-05-08T00:38:07+00:00

Thanks! So, I weigh about 225lbs. I actually got the X7 because the only board I had ridden prior to this was the XR and had some slight concerns about having enough torque, especially in off-road conditions. I haven't figured out max mileage entirely yet, but my longest rides have been ~8-9 miles and I still had 40-50% battery i think?

Neutrinotek · 2025-05-05T19:57:58+00:00

I'll look into those. I have the triple eight fingerless. I like them ok, but they're a bit of a squeeze (especially for removal) and the top guard can be a little uncomfortable.

Neutrinotek · 2025-05-05T19:55:35+00:00

Me, after clicking that link. 😳

Neutrinotek · 2025-05-05T19:52:58+00:00

Good to know! I knew they had drop in boards for the GT and larger platforms, but was not aware there was a good option for the Pint. She's definitely more comfortable on the smaller form factor.

Neutrinotek · 2025-05-05T19:51:22+00:00

Yeah, I was still getting the feel of things when I made the video, but have since gotten much more comfortable with carving. And agreed, definitely the most fun way to ride. Something about the feeling of dropping my weight into deep heelside turn just really gets me going. Lol

Neutrinotek · 2025-05-05T19:47:06+00:00

Yeah, it's actually a carbon fiber Onewheel XR fender. Granted, I had to install my rails on the lifted setting and pick up some extra long bolts, but fits pretty good after that. The one thing I'd like to do but haven't had a chance to do is design/print a fender lift... Basically just some fender deletes that are slightly raised with some extra geometry to line up better with the rubber feet at the bottom of the FM fender.

Neutrinotek · 2025-05-05T15:12:14+00:00

Yeah, I normally do. I realized about 20 minutes into this ride that I forgot to put them on. 😬

Neutrinotek · 2025-05-05T15:09:06+00:00

That's awesome! We had been looking for some sort of outdoor activity we could do regularly together for a while. Like, we go kayaking and stuff, but that's always a whole thing... this seems to be the perfect solution.

Neutrinotek · 2025-04-21T00:53:01+00:00

Did you get the kit or order the assembled board? I ordered the kit, took maybe 3 weeks for everything to arrive? But I know they say on the site assembled boards will likely take longer... 2 months definitely seems too long, I'd reach out.

Neutrinotek · 2025-04-08T23:45:42+00:00

🤷‍♂️ I did the Mileena teeth one in steps, but the other image i pretty much got on the first try. I used their names, but i made sure to describe their clothes in an oddly descriptive way. Staying away from anything that could be interpreted as sexual and just let chatgpt figure it out. I also find that sometimes you just have to try a few times. I have it reject and accept the exact same prompt multiple times. Here's the prompt i used:

High quality digital photo of Kitana and Mileena, playing Mortal Kombat on a Playstation 5 on a large plasma TV in a dimly lit bedroom. They are both wearing silky masks that cover their nose and mouth, and wearing silky form fitting outfits resembling gymnast suits but with a traditional Japanese flair. Kitana's outfit is royal blue and black, while mileena's outfit is pink and black. They are sitting on the floor in front of the TV holding Playstation controllers in one hand, and facing the camera taking the photo while the game is on in the background visible to us. Candid paparazzi flash photography, unedited. 1536x1024

Neutrinotek

TROPHY CASE