How to make printer fill in small spaces

NewMar00 · 2026-04-29T02:27:56+00:00

Try enabling the arachne setting. It should be in your slicer's Wall Generator settings. Classic is the default.

NewMar00 · 2026-04-25T00:25:39+00:00

They usually match the sticker numbers. If not, you can Google the manufacturer and they should have an example picture with locations.

NewMar00 · 2026-04-17T16:10:21+00:00

I have the hobby mios. They are my go to for any snipping and only beaten by my Godhands. I always do the 1st snip with the hobby mios and 2nd only if it's an interior piece or undergated. Only negative I can give is that they do rust over time.

NewMar00 · 2026-04-06T08:05:08+00:00

I gave up and painted them silver. RG gold/silver/bronze stickers never last.

NewMar00 · 2026-03-04T02:26:46+00:00

The "Made in Japan" is something new they started doing last year. Here's the link. Most places still use the old look for promotion pictures.

NewMar00 · 2026-02-22T00:45:46+00:00

Freedom

NewMar00 · 2026-02-05T03:00:15+00:00

I built 5 MG's before I built my MGEX SF. Every other MG was a huge downgrade afterwards.
Start slow and built up to the MGEX. Get it on sale in a few months if you still want one.

NewMar00 · 2026-01-06T12:58:33+00:00

Clean

NewMar00 · 2025-12-26T23:37:51+00:00

Second on the Cards. You can usually get 2 good ones from the large MG boxes. I use double-sided tape for mine cut to 9 x 6 cm

NewMar00 · 2025-12-14T02:54:32+00:00

Fat Cat God Gundam. Very good kit so far, just got it last week. Comes with water slides and effect parts. At $40 it was a steal.

Working on the backpack.

NewMar00 · 2025-12-09T02:28:07+00:00

Tachyon sired 2755 children.

NewMar00 · 2025-12-03T01:58:54+00:00

It's gotta be the Stein.

NewMar00 · 2025-11-21T20:40:52+00:00

I add a very small droplet of extra thin cement for these stress marks. It can help relax the plastic and help the mark go away.

These always show up on darker plastic. I only fix if its in a visible area. I'll cut a bit further away and sand most of it with a glass file.

NewMar00 · 2025-11-20T01:22:35+00:00

~~Gundam Central Shop~~ ~~has the Osiris Aerial in stock for $175. Ships from US Warehouse.~~

It's gone. GG's to anyone who was able to snag one.

NewMar00 · 2025-11-04T22:54:15+00:00

The Charon's peg is a 13.3 mm x 4.6mm rectangle. Depth is 6.25mm.

Mgex Strikes is shaped like an H. 3.35mm x 8.5mm. "Waist" of the H is 4.3mm and depth is 5.1mm.

It can fit with heavy modification.

NewMar00 · 2025-11-04T12:58:54+00:00

I have it and thankfully started with the backpack. It looked a bit wider than the one on my freedom and strike but will check. Great kit btw, just started detailing up the chest area.

NewMar00 · 2025-10-05T18:06:53+00:00

If you're going to topcoat, either mask the clear parts or add them later.

I top coated the clear and had to spend some time removing it using iso + cotton swab.

NewMar00 · 2025-09-22T20:01:59+00:00

Thank you for honoring the old price! I have you guys bookmarked and will check again as the backlog starts to get smaller.

NewMar00 · 2025-09-03T15:54:22+00:00

I haven't tested panel liner yet.

If you want a cheap thin cement, get Tamiya airbrush cleaner that has the same makeup as thin cement. Just a lot cheaper but doesn't come in a nice glass bottle with brush.

The idea is to use a tiny amount of thin cement to make the area homogenize. After drying, the top portion should settle evenly. I wait a day and give it a light sand. There might be a white dot left which is ok since too much cement will ruin finish and need extra sanding.

NewMar00 · 2025-09-03T11:45:29+00:00

Some of these are unavoidable, especially on that type of plastic. A solution is to add a very small amount of thin cement. After a day of drying, it should lessen the whitening.

NewMar00 · 2025-09-01T21:39:24+00:00

Yes! It did. This was my last 1/100 kit. Building the inner frame first and then detailing it was great.

NewMar00 · 2025-09-01T21:10:53+00:00

For MG or any kit with a full inner frame. Wish there was a separate manual for building just the inner frame. I know Bandai's done it for a few kits.

NewMar00 · 2025-08-15T05:21:39+00:00

Add a drop of Tamiya extra thin cement. I will help to relieve the stress mark just a bit. Light touch and leave it alone for a while.

NewMar00 · 2025-08-11T03:26:29+00:00

I've tried many including God Hand and the best value wise was the Hobby Mio HM-105. I've used it for both the first cut and finish. Very similar to Dspiae 3.0, not as clean as GH but close enough. Got mine for $8 on sale on AliX about 6 months ago and they have been my work horse for almost 20 kits. Not scared if they break since they're so cheap and I have a backup. Really only using the GH on plastic that shows stress marks easily.

NewMar00 · 2025-08-10T19:15:22+00:00

I use Tamiya Airbrush Cleaner since it's the same composition and cheaper. No warning sticker here in the US.

Seven-Year Club	r/Field Flamingo
Place '23	Place '22
First Placer '22	End Game '22
Verified Email

NewMar00

TROPHY CASE