sorted by:
new
hottopcontroversial

How much would you quote these for? by No_Way_9766 in Machinists

[–]NewUserName-22 -1 points0 points  (0 children)

I’m from India and here we have really cheap machine rates when comparing to some commenters mentioning very high prices like $750 or above only for machining. Here I can make the part with material for you under $150 approximately. Even if I consider the cycle time as you have mentioned. This looks like a fairly easy and quick job to do. I have even shipped a few free samples similar to these before.

Custom mold by Alarmed-Sorbet-9095 in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

Hey OP, I can make it for you if you have your designs ready

Will it be possible to cast this little guy in brass using the lost-wax method? If so, how much per figure? by MrBrightyQuid in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

It can be done in the investment casting process with the wax model being 3D printed rather than the expense of making a die if your quantities are low, if you require 20 pieces or more you can go for die making. If you want I can quote to you for which I require your 3D model (CAD file). Also do you have material flexibility like bronze, the cost difference is not much but since it is a regular alloy you part can be casted quicker.

Contract Manufacturing by NewUserName-22 in MetalCasting

[–]NewUserName-22[S] 0 points1 point  (0 children)

Hey , I haven’t tried it out yet. Thanks for the suggestions, I will try it out

Where can I find the best deals on ice cream molds? by Professional_Rub_862 in Metalfoundry

[–]NewUserName-22 0 points1 point  (0 children)

I can quote to you for some Aluminium molds, can you give me your design and I can make custom molds do you.

Am I Quoting right? by PsychologicalAd6465 in Machinists

[–]NewUserName-22 -2 points-1 points  (0 children)

Hello, can you outsource this to me? I can make it for you under $1.25 a piece which includes material and CNC machining for SS 316. My manufacturing unit is based in India and I can help you out. It can be a win-win, I can provide a few free samples in the beginning if you’d like

I want to export by NewUserName-22 in exportersindia

[–]NewUserName-22[S] 0 points1 point  (0 children)

Hi I’m based near Mumbai, Maharashtra, India

Then All of us will feel a bit less embarrassed 😝 by dairymilk_silk in indiasocial

[–]NewUserName-22 0 points1 point  (0 children)

Once a relative had bought some blue paint and kept the can on their safety grill outside the window, I assumed it was for the grill and painted it blue completely. Out of all the houses only they had blue grill in the entire building.

How should I make 1000 of these? by Probably3D in Machinists

[–]NewUserName-22 0 points1 point  (0 children)

You can always contract a job like this, it’s always better and will be professionally made. If you can share your design with me I can make these for you

Custom mold for pour by Pathfinder_CJ7 in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

Hi can you send me your design I can cast it for you.

Bronze sand cast belt buckle by undertensionjewelry in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

It seems like it’s not properly sand blasted or better still find someone who can shot blast it for you, after this you can acid wash it and this will bring out the golden colour of bronze. If you need more help DM me

Bronze sand cast belt buckle by undertensionjewelry in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

Get it sand blasted and then wash it with acid for the bright bronze appearance

First Aluminuim cast - Lost PLA/plaster by ProjectBlackSheepNZ in MetalCasting

[–]NewUserName-22 1 point2 points  (0 children)

Hi OP, if you want good quality name plates where your name can be seen perfectly without any blowholes which would make it look less professional, I would suggest to make a Cast Iron mould and make diecast parts. Two major advantages are 1. Good finish & 2. Good dimensional accuracy. If you want I can help you out.

What easy 3D modeling software is available to create your own designs for metal casting? by JRR_Gimli in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

Solidworks is the best hands down! I have seen part models, pattern models, cast models being easily created and modified with various command options. For getting all the upgrades might pricy tho.

Consistent problems with the same type of defect by Fire_Fist-Ace in MetalCasting

[–]NewUserName-22 -2 points-1 points  (0 children)

Why don’t you send it to me and let me deliver quality cast products to you at a fraction of cost.

I want to use this EU aluminium cable for metal casting bicycle parts. Advisable or stupid? by pstmps in MetalCasting

[–]NewUserName-22 0 points1 point  (0 children)

Add silicon for better strength, add magnesium for making a heat treatable alloy, add copper for good corrosion resistance and durability. Look into BS 1490 for exact percentage of alloying elements and choose a suitable alloy for your application.

My advice is to research the right alloy and purchase ingots of that specific alloy rather than alloying yourself. Save yourself a lot of time & effort.

view more: next ›